7044 Ogden Road SE - Revision history

Alberta Fire Alarms at 20:13, 25 July 2024

2024-07-25T20:13:43Z

← Older revision		Revision as of 14:13, 25 July 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: None (120V, 3-wire system)<br />System Type:Hardwired<br /> System Line Voltage: 120VAC<br />NAC Voltage:120VAC<br />Date of last known Upgrade: Late 2000s<br />Year Opened: 1914 <br /> ~~ear~~ Demolished: 2021		\| FACP: None (120V, 3-wire system)<br />System Type:Hardwired<br /> System Line Voltage: 120VAC<br />NAC Voltage:120VAC<br />Date of last known Upgrade: Late 2000s<br />Year Opened: 1914 <br /> Year Demolished: 2021
	\|}		\|}
	'''7044 Ogden Road SE''' is a small apartment building in Ogden. It was built in 1914 as a Chinese laundromat with a boarding house upstairs. It's system is quite interesting, as it has no actual panel and simply operates off of 120VAC, with the bells in series with the initiating devices. The system's parts dated from ~~the 1960s~~ to the 2000s. Obviously the components are not original. Unfortunately the 106 year old building is slated for demolition in February 2021 to make way for the new Green Line LRT. As of February 19th, 2021 [[User:Twentytwo22]] has salvaged all but two devices.		'''7044 Ogden Road SE''' is a small apartment building in Ogden. It was built in 1914 as a Chinese laundromat with a boarding house upstairs. It's system is quite interesting, as it has no actual panel and simply operates off of 120VAC, with the bells in series with the initiating devices. The system's parts dated from 1958 to the 2000s. Obviously the components are not original. Unfortunately the 106 year old building is slated for demolition in February 2021 to make way for the new Green Line LRT. As of February 19th, 2021 [[User:Twentytwo22]] has salvaged all but two devices.
	[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]		[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]
	== Former System Specifications (~~1970s~~-2021) ==		== Former System Specifications (1958-2021) ==
	The building was protected by a hardwired fire alarm system, so there was no panel.		The building was protected by a hardwired fire alarm system, so there was no panel.
	==== Notification Appliances ====		==== Notification Appliances ====

TwentyThree33 at 01:06, 19 May 2024

2024-05-19T01:06:08Z

← Older revision		Revision as of 19:06, 18 May 2024
Line 13:		Line 13:
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances were:		The notification appliances were:

	* An Edwards 438D-6N5C vibrating bell, (6" gong)		* An Edwards 438D-6N5C vibrating bell, (6" gong)
	* An Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement		* An Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement
	* An Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label was missing.		* An Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label was missing.

	<br>The Edwards 438D-6N5C and Amseco PBA-6-120 bells were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the PBA-6-120 bell is safe in [[TwentyThree33's Collection]].		<br>The Edwards 438D-6N5C and Amseco PBA-6-120 bells were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the PBA-6-120 bell is safe in [[TwentyThree33's Collection]].
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The three pull stations consisted of:		The three pull stations consisted of:

	* An Edwards 274-111 conventional pull station at the basement door		* An Edwards 274-111 conventional pull station at the basement door
	* Two Edwards 270-SPO pull stations in the second floor hallway; one was a second-generation (no FIRE ALARM, classic shield), and the other was a rare, newer variant, this one was a deficiency replacement.		* Two Edwards 270-SPO pull stations in the second floor hallway; one was a second-generation (no FIRE ALARM, classic shield), and the other was a rare, newer variant, this one was a deficiency replacement.
Line 28:		Line 25:
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[]		[[]
			[[Category:Calgary]]
			[[Category:Residential]]

Alberta Fire Alarms at 20:46, 26 January 2024

2024-01-26T20:46:49Z

← Older revision		Revision as of 14:46, 26 January 2024
Line 12:		Line 12:
	The building was protected by a hardwired fire alarm system, so there was no panel.		The building was protected by a hardwired fire alarm system, so there was no panel.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances were an Edwards 438D-6N5C vibrating bell, (6" gong)~~, an~~ Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement~~, and an~~ Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label was missing.		The notification appliances were:

			* An Edwards 438D-6N5C vibrating bell, (6" gong)
			* An Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement
			* An Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label was missing.

	<br>The Edwards 438D-6N5C and Amseco PBA-6-120 bells were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the PBA-6-120 bell is safe in [[TwentyThree33's Collection]].		<br>The Edwards 438D-6N5C and Amseco PBA-6-120 bells were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the PBA-6-120 bell is safe in [[TwentyThree33's Collection]].
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The three pull stations consisted of an Edwards 274-111 conventional pull station at the basement door~~, and two~~ Edwards 270-SPO pull stations in the second floor hallway; one was a second-generation (no FIRE ALARM, classic shield), and the other was a rare, newer variant, this one was a deficiency replacement.		The three pull stations consisted of:

			* An Edwards 274-111 conventional pull station at the basement door
			* Two Edwards 270-SPO pull stations in the second floor hallway; one was a second-generation (no FIRE ALARM, classic shield), and the other was a rare, newer variant, this one was a deficiency replacement.
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[]		[[]

Alberta Fire Alarms at 05:05, 17 December 2023

2023-12-17T05:05:35Z

← Older revision		Revision as of 23:05, 16 December 2023
Line 7:		Line 7:
	\| FACP: None (120V, 3-wire system)<br />System Type:Hardwired<br /> System Line Voltage: 120VAC<br />NAC Voltage:120VAC<br />Date of last known Upgrade: Late 2000s<br />Year Opened: 1914 <br /> ear Demolished: 2021		\| FACP: None (120V, 3-wire system)<br />System Type:Hardwired<br /> System Line Voltage: 120VAC<br />NAC Voltage:120VAC<br />Date of last known Upgrade: Late 2000s<br />Year Opened: 1914 <br /> ear Demolished: 2021
	\|}		\|}
	'''7044 Ogden Road SE''' is a small apartment building in Ogden. It was built in 1914 as a Chinese laundromat with a boarding house upstairs. It's system is quite interesting, as it has no actual panel and simply operates off of 120VAC, with the bells in series with the initiating devices. Obviously the components are not original. Unfortunately the 106 year old building is slated for demolition in February 2021 to make way for the new Green Line LRT. As of February 19th, 2021 [[User:Twentytwo22]] has salvaged all but two devices.		'''7044 Ogden Road SE''' is a small apartment building in Ogden. It was built in 1914 as a Chinese laundromat with a boarding house upstairs. It's system is quite interesting, as it has no actual panel and simply operates off of 120VAC, with the bells in series with the initiating devices. The system's parts dated from the 1960s to the 2000s. Obviously the components are not original. Unfortunately the 106 year old building is slated for demolition in February 2021 to make way for the new Green Line LRT. As of February 19th, 2021 [[User:Twentytwo22]] has salvaged all but two devices.
	[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]		[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]
	== Former System Specifications (1970s-2021) ==		== Former System Specifications (1970s-2021) ==

Alberta Fire Alarms: /* Former System Specifications (1970s-2021) */

2023-12-17T04:59:47Z

Former System Specifications (1970s-2021)

← Older revision		Revision as of 22:59, 16 December 2023
Line 12:		Line 12:
	The building was protected by a hardwired fire alarm system, so there was no panel.		The building was protected by a hardwired fire alarm system, so there was no panel.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances were an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement, and an Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label is missing.		The notification appliances were an Edwards 438D-6N5C vibrating bell, (6" gong), an Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement, and an Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label was missing.

	<br>The 438D-6N5C and Amseco ~~bell~~ were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the ~~Amseco~~ bell is safe in [[TwentyThree33's Collection]].		<br>The Edwards 438D-6N5C and Amseco PBA-6-120 bells were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the PBA-6-120 bell is safe in [[TwentyThree33's Collection]].
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The three pull stations consisted of ~~one~~ Edwards 274-111 at the basement door, and two Edwards 270-SPO pull stations in the second floor hallway (one ~~2nd~~ generation, and a rare newer one as a deficiency replacement).		The three pull stations consisted of an Edwards 274-111 conventional pull station at the basement door, and two Edwards 270-SPO pull stations in the second floor hallway; one was a second-generation (no FIRE ALARM, classic shield), and the other was a rare, newer variant, this one was a deficiency replacement.
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[]		[[]

Alberta Fire Alarms at 04:56, 17 December 2023

2023-12-17T04:56:47Z

Alberta Fire Alarms: /* Former System Specifications */

2023-12-06T20:27:30Z

Former System Specifications

← Older revision		Revision as of 14:27, 6 December 2023
Line 10:		Line 10:
	[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]		[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]
	== Former System Specifications ==		== Former System Specifications ==
	~~Note: that there is NO panel for this system. It's a hardwired 120VAC system in series, so it's kind of a "1 zone, 1 NAC conventional fire alarm panel".~~

	The building was protected by a hardwired fire alarm system, so there was no panel.		The building was protected by a hardwired fire alarm system, so there was no panel.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances consisted of an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong), and an Edwards "Adaptabel" 340-T square-domed vibrating bell in the 2nd floor storage room~~. It is known as a "TROUBLE BELL"~~, ~~but has~~ the label ~~ripped off~~. <br>		The notification appliances consisted of an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong), and an Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label is missing.<br>The 438D-6N5C and Amseco bell were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the Amseco bell is safe in [[TwentyThree33's Collection]].
	The 438D-6N5C and Amseco bell were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the Amseco bell is safe in [[TwentyThree33's Collection]].
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The three pull stations consisted of one Edwards 274-111 at the basement door, and two Edwards 270-SPO pull stations in the second floor hallway (one 2nd generation ~~with classic shield and no FIRE ALARM at top~~, and a rare newer one).		The three pull stations consisted of one Edwards 274-111 at the basement door, and two Edwards 270-SPO pull stations in the second floor hallway (one 2nd generation, and a rare newer one).
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[]		[[]

Alberta Fire Alarms: /* Former System Specifications */

2023-11-27T06:27:42Z

Former System Specifications

← Older revision		Revision as of 00:27, 27 November 2023
Line 12:		Line 12:
	Note: that there is NO panel for this system. It's a hardwired 120VAC system in series, so it's kind of a "1 zone, 1 NAC conventional fire alarm panel".		Note: that there is NO panel for this system. It's a hardwired 120VAC system in series, so it's kind of a "1 zone, 1 NAC conventional fire alarm panel".

			The building was protected by a hardwired fire alarm system, so there was no panel.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances consisted of an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong), and an Edwards "Adaptabel" 340-T square-domed vibrating bell in the 2nd floor storage room. It is known as a "TROUBLE BELL", but has the label ripped off. <br>		The notification appliances consisted of an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong), and an Edwards "Adaptabel" 340-T square-domed vibrating bell in the 2nd floor storage room. It is known as a "TROUBLE BELL", but has the label ripped off. <br>

Twentytwo22 at 19:58, 3 April 2023

2023-04-03T19:58:37Z

← Older revision		Revision as of 13:58, 3 April 2023
Line 21:		Line 21:
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[~~Category:Facilitie~~]		[[]

Twentytwo22 at 19:40, 3 April 2023

2023-04-03T19:40:46Z

← Older revision		Revision as of 13:40, 3 April 2023
Line 21:		Line 21:
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[Category:~~Facilities]~~]		[[Category:Facilitie]

← Older revision		Revision as of 22:56, 16 December 2023
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: None (~~hardwired~~ system)<br />System Type:Hardwired<br /> System Line Voltage: 120VAC<br />NAC Voltage:120VAC<br />Date of last known Upgrade: Late 2000s<br />Year Opened: 1914 <br /> ~~Year~~ Demolished: 2021		\| FACP: None (120V, 3-wire system)<br />System Type:Hardwired<br /> System Line Voltage: 120VAC<br />NAC Voltage:120VAC<br />Date of last known Upgrade: Late 2000s<br />Year Opened: 1914 <br /> ear Demolished: 2021
	\|}		\|}
	'''7044 Ogden Road SE''' is a small apartment building in Ogden. It was built in 1914 as a Chinese laundromat with a boarding house upstairs. It's system is quite interesting, as it has no actual panel and simply operates off of 120VAC, with the bells in series with the initiating devices. Obviously the components are not original. Unfortunately the 106 year old building is slated for demolition in February 2021 to make way for the new Green Line LRT. As of February 19th, 2021 [[User:Twentytwo22]] has salvaged all but two devices.		'''7044 Ogden Road SE''' is a small apartment building in Ogden. It was built in 1914 as a Chinese laundromat with a boarding house upstairs. It's system is quite interesting, as it has no actual panel and simply operates off of 120VAC, with the bells in series with the initiating devices. Obviously the components are not original. Unfortunately the 106 year old building is slated for demolition in February 2021 to make way for the new Green Line LRT. As of February 19th, 2021 [[User:Twentytwo22]] has salvaged all but two devices.
	[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]		[[File:Ogdenblock.png\|frame\|7044 Ogden Road as it appeared circa 2010]]
	== Former System Specifications ==		== Former System Specifications (1970s-2021) ==
	The building was protected by a hardwired fire alarm system, so there was no panel.		The building was protected by a hardwired fire alarm system, so there was no panel.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances ~~consisted of~~ an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong), and an Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label is missing.<br>The 438D-6N5C and Amseco bell were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the Amseco bell is safe in [[TwentyThree33's Collection]].		The notification appliances were an Edwards 438D-6N5C vibrating bell, (6" gong) an Amseco PBA-6-120 vibrating bell (6" gong) as a deficiency replacement, and an Edwards "Adaptabel/TROUBLE BELL" 340-T square-domed vibrating bell in the 2nd floor storage room, the label is missing.

			<br>The 438D-6N5C and Amseco bell were saved from demolition by [[User:Twentytwo22]]. He now owns the 438D-6N5C, while the Amseco bell is safe in [[TwentyThree33's Collection]].
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The three pull stations consisted of one Edwards 274-111 at the basement door, and two Edwards 270-SPO pull stations in the second floor hallway (one 2nd generation, and a rare newer one).		The three pull stations consisted of one Edwards 274-111 at the basement door, and two Edwards 270-SPO pull stations in the second floor hallway (one 2nd generation, and a rare newer one as a deficiency replacement).
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.		There automatic detection devices consisted of two American Sensors ESA5011 ionization 120V smoke detectors with an auxilary contact on the second floor, and in the basement laundry room respectively. [further investigation will provide an update soon]. When a pull station is pulled, the smoke detectors also sound.
	[[]		[[]