BMO Centre - Revision history

TwentyThree33 at 20:38, 21 July 2024

2024-07-21T20:38:12Z

← Older revision		Revision as of 14:38, 21 July 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Edwards ~~EST3~~ <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981		\| FACP: Edwards EST4<br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981
	\|}		\|}
	The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded around 2003, and is currently undergoing an upgrade.<br>Note: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''		The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded around 2003, and is currently undergoing an upgrade.<br>Note: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''
Line 17:		Line 17:
	\| FACP: Edwards EST3 <br />FACP Location: Unknown <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) Temporal (Alarm) <br>Strobes Synchronized: Yes, EST <br />Date of last known Upgrade: 2018 <br/> Year Installed: 2003 <br />Year Decommissioned: 2023		\| FACP: Edwards EST3 <br />FACP Location: Unknown <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) Temporal (Alarm) <br>Strobes Synchronized: Yes, EST <br />Date of last known Upgrade: 2018 <br/> Year Installed: 2003 <br />Year Decommissioned: 2023
	\|}		\|}

	====FACP====		====FACP====
	The building was protected by an Edwards EST3 addressable fire alarm system. The panel location was unknown. The system ran EST’s Signature addressable protocol, and was configured for two-stage operation. The alert signal coding is 20BPM in first stage, followed by temporal in alarm		The building was protected by an Edwards EST3 addressable fire alarm system. The panel location was unknown. The system ran EST’s Signature addressable protocol, and was configured for two-stage operation. The alert signal coding is 20BPM in first stage, followed by temporal in alarm
Line 45:		Line 44:
	=== Accessories ===		=== Accessories ===
	There was an Edwards EBP6SA 6.5A booster panel located beside the 3-LCDANN, as there was an EST2 panel in its place prior to the floods.		There was an Edwards EBP6SA 6.5A booster panel located beside the 3-LCDANN, as there was an EST2 panel in its place prior to the floods.

	==== EOLs ====		==== EOLs ====
	There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.		There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.

Alberta Fire Alarms: New system coming soon!

2024-07-20T21:31:17Z

New system coming soon!

← Older revision		Revision as of 15:31, 20 July 2024
Line 8:		Line 8:
	\|}		\|}
	The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded around 2003, and is currently undergoing an upgrade.<br>Note: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''		The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded around 2003, and is currently undergoing an upgrade.<br>Note: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''
	==System Specifications (1981 building) (2003-2023)==		==Former System Specifications (1981 building) (2003-2023)==
	~~NOTE~~: ~~''This information is no longer accurate~~, ~~as the system is currently in the process~~ of ~~a full upgrade. This page is accurate to July 2022.''~~		{\| style="float:right;border:2px solid black"
			\|-
			! Former System Specifications
			\|-
			\|
			\|-
			\| FACP: Edwards EST3 <br />FACP Location: Unknown <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) Temporal (Alarm) <br>Strobes Synchronized: Yes, EST <br />Date of last known Upgrade: 2018 <br/> Year Installed: 2003 <br />Year Decommissioned: 2023
			\|}

	====FACP====		====FACP====
	The building was protected by an Edwards EST3 addressable fire alarm system. The panel location was unknown. The system ran EST’s Signature addressable protocol, and was configured for two-stage operation. The alert signal coding is 20BPM in first stage, followed by temporal in alarm		The building was protected by an Edwards EST3 addressable fire alarm system. The panel location was unknown. The system ran EST’s Signature addressable protocol, and was configured for two-stage operation. The alert signal coding is 20BPM in first stage, followed by temporal in alarm

Alberta Fire Alarms at 00:49, 10 July 2024

2024-07-10T00:49:50Z

← Older revision		Revision as of 18:49, 9 July 2024
Line 11:		Line 11:
	NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''		NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''
	====FACP====		====FACP====
	The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown. The system ~~runs~~ EST’s Signature addressable protocol, and is configured for two-stage operation. The ~~system~~ coding is 20BPM in first stage, followed by temporal in ~~general~~ alarm.		The building was protected by an Edwards EST3 addressable fire alarm system. The panel location was unknown. The system ran EST’s Signature addressable protocol, and was configured for two-stage operation. The alert signal coding is 20BPM in first stage, followed by temporal in alarm

	The EST3 was installed in 2013, replacing an Edwards EST2 that was water-damaged from the floods.		The EST3 was installed in 2013, replacing an Edwards EST2 that was water-damaged from the floods.
Line 17:		Line 17:
	There was an Edwards EST3-LCDANN annunciator in the now-demolished Hall A entrance vestibule.		There was an Edwards EST3-LCDANN annunciator in the now-demolished Hall A entrance vestibule.
	====Notification Appliances====		====Notification Appliances====
	Most notification appliances ~~are~~ Edwards MB10-24 motor bells (10” gong) mounted on Edwards 403-5A-R strobe plates (15cd).		Most notification appliances were Edwards MB10-24 motor bells (10” gong) mounted on Edwards 403-5A-R strobe plates (15cd).

	One showroom, as well as one corridor ~~contain~~ Edwards 439D-10AWC vibrating bells (10” gong) on a 403-5A-R strobe plates (15cd), leftover from the EST2, which ~~was~~ most likely installed in 2000.		One showroom, as well as one corridor contained Edwards 439D-10AWC vibrating bells (10” gong) on a 403-5A-R strobe plates (15cd), leftover from the EST2, which were most likely installed in 2000.

	There was one Edwards 439D-10AWC vibrating bell (10” gong, white label) by an entrance as a deficiency replacement in 2018; the strobe plate remained, this particular one was near Hall A and no longer exists.		There was one Edwards 439D-10AWC vibrating bell (10” gong, white label) by an entrance as a deficiency replacement in 2018; the strobe plate remained, this particular one was near Hall A and no longer exists.

	There is an Edwards 439D-10AWC vibrating bell (10” gong) outside the building.		There was an Edwards 439D-10AWC vibrating bell (10” gong) outside the building.
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	Most pull stations ~~are~~ EST SIGA-270P addressable two-stage single-action pull stations; most were installed in 2003. Deficiency replacements of all generations ~~can~~ be found scattered.		Most pull stations were EST SIGA-270P addressable two-stage single-action pull stations; most were installed in 2003. Deficiency replacements of all generations could be found scattered.

	One showroom ~~contains~~ first-generation SIGA-270P pull stations (shield logo, 2000)		One showroom contained first-generation SIGA-270P pull stations (shield logo, 2000)

	There ~~are~~ a couple of original Edwards 270-GAO conventional two-stage pull stations, these ~~are~~ likely wired to SIGA-CT2 dual-input monitor modules.		There were a couple of original Edwards 270-GAO conventional two-stage pull stations, these were likely wired to SIGA-CT2 dual-input monitor modules.
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There ~~are~~ EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases. There is also a sprinkler system with waterflow detection.		There were EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases. There was also a sprinkler system with waterflow detection.
	==== Modules ====		==== Modules ====
	There ~~are~~ EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.		There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
	=== Accessories ===		=== Accessories ===
	There was an Edwards EBP6SA 6.5A booster panel located beside the 3-LCDANN, as there was an EST2 panel in its place prior to the floods.		There was an Edwards EBP6SA 6.5A booster panel located beside the 3-LCDANN, as there was an EST2 panel in its place prior to the floods.

			==== EOLs ====
			There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
	\|-		\|-

TwentyThree33 at 23:27, 22 May 2024

2024-05-22T23:27:54Z

← Older revision		Revision as of 17:27, 22 May 2024
Line 57:		Line 57:
	==== Modules ====		==== Modules ====
	There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.		There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
			[[Category:Calgary]]
			[[Category:Event Centres]]

Alberta Fire Alarms at 01:21, 17 March 2024

2024-03-17T01:21:01Z

← Older revision		Revision as of 19:21, 16 March 2024
Line 7:		Line 7:
	\| FACP: Edwards EST3 <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981		\| FACP: Edwards EST3 <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981
	\|}		\|}
	The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded ~~in the 2000s~~, and is currently undergoing an upgrade.<br>~~Not~~: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''		The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded around 2003, and is currently undergoing an upgrade.<br>Note: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''
	==System Specifications (1981 building) (~~2000s~~-2023)==		==System Specifications (1981 building) (2003-2023)==
	NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''		NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''
	====FACP====		====FACP====
Line 26:		Line 26:
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	Most pull stations are EST SIGA-270P addressable two-stage single-action pull stations; most were installed in ~~the 2000s~~. Deficiency replacements of all generations can be found scattered. O		Most pull stations are EST SIGA-270P addressable two-stage single-action pull stations; most were installed in 2003. Deficiency replacements of all generations can be found scattered.

	ne showroom contains first-generation SIGA-270P pull stations (shield logo).		One showroom contains first-generation SIGA-270P pull stations (shield logo, 2000)

	There are a couple of original Edwards 270-GAO conventional two-stage pull stations, these are likely wired to SIGA-CT2 dual-input monitor modules.		There are a couple of original Edwards 270-GAO conventional two-stage pull stations, these are likely wired to SIGA-CT2 dual-input monitor modules.

Alberta Fire Alarms at 19:04, 3 February 2024

2024-02-03T19:04:30Z

← Older revision		Revision as of 13:04, 3 February 2024
Line 11:		Line 11:
	NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''		NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''
	====FACP====		====FACP====
	The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown~~. It replaced an EST2 in 2013 due to water damage from the 2013 floods~~. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The system coding is 20BPM in first stage, followed by temporal in general alarm.		The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The system coding is 20BPM in first stage, followed by temporal in general alarm.

			The EST3 was installed in 2013, replacing an Edwards EST2 that was water-damaged from the floods.
	=====Annunciators=====		=====Annunciators=====
	There was an Edwards EST3-LCDANN annunciator in the now-demolished Hall A entrance vestibule.		There was an Edwards EST3-LCDANN annunciator in the now-demolished Hall A entrance vestibule.

Alberta Fire Alarms at 20:45, 26 January 2024

2024-01-26T20:45:03Z

← Older revision		Revision as of 14:45, 26 January 2024
Line 15:		Line 15:
	There was an Edwards EST3-LCDANN annunciator in the now-demolished Hall A entrance vestibule.		There was an Edwards EST3-LCDANN annunciator in the now-demolished Hall A entrance vestibule.
	====Notification Appliances====		====Notification Appliances====
	Most notification appliances are Edwards MB10-24 motor bells (10” gong) mounted on Edwards 403-5A-R strobe plates (15cd). One showroom, as well as one corridor contain Edwards 439D-10AWC vibrating bells (10” gong) on a 403-5A-R strobe plates (15cd), leftover from the EST2, which was most likely installed in 2000. There was one Edwards 439D-10AWC vibrating bell (10” gong, white label) by an entrance as a deficiency replacement in 2018; the strobe plate remained, this particular one was near Hall A and no longer exists.		Most notification appliances are Edwards MB10-24 motor bells (10” gong) mounted on Edwards 403-5A-R strobe plates (15cd).

			One showroom, as well as one corridor contain Edwards 439D-10AWC vibrating bells (10” gong) on a 403-5A-R strobe plates (15cd), leftover from the EST2, which was most likely installed in 2000.

			There was one Edwards 439D-10AWC vibrating bell (10” gong, white label) by an entrance as a deficiency replacement in 2018; the strobe plate remained, this particular one was near Hall A and no longer exists.

	There is an Edwards 439D-10AWC vibrating bell (10” gong) outside the building.		There is an Edwards 439D-10AWC vibrating bell (10” gong) outside the building.
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	Most pull stations are EST SIGA-270P addressable two-stage single-action pull stations; most were installed in the 2000s. Deficiency replacements of all generations can be found scattered. ~~One~~ showroom contains first-generation SIGA-270P pull stations (shield logo). There are a couple of original Edwards 270-GAO conventional two-stage pull stations, these are likely wired to SIGA-CT2 dual-input monitor modules.		Most pull stations are EST SIGA-270P addressable two-stage single-action pull stations; most were installed in the 2000s. Deficiency replacements of all generations can be found scattered. O

			ne showroom contains first-generation SIGA-270P pull stations (shield logo).

			There are a couple of original Edwards 270-GAO conventional two-stage pull stations, these are likely wired to SIGA-CT2 dual-input monitor modules.
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases. There is also a sprinkler system with waterflow detection.		There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases. There is also a sprinkler system with waterflow detection.

Alberta Fire Alarms at 21:19, 31 December 2023

2023-12-31T21:19:23Z

← Older revision		Revision as of 15:19, 31 December 2023
Line 7:		Line 7:
	\| FACP: Edwards EST3 <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981		\| FACP: Edwards EST3 <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981
	\|}		\|}
	The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded in the 2000s. <br>Not: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''		The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded in the 2000s, and is currently undergoing an upgrade.<br>Not: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''
	==System Specifications (1981 building) (2000s-2023)==		==System Specifications (1981 building) (2000s-2023)==
	NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''		NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''

Alberta Fire Alarms: /* System Specifications (2009 Expansion) (2009-persent) */

2023-12-31T21:18:19Z

System Specifications (2009 Expansion) (2009-persent)

← Older revision		Revision as of 15:18, 31 December 2023
Line 33:		Line 33:
	\|		\|
	\|-		\|-
	\| FACP: Edwards EST3X <br /> FACP Location: Northwest Entrance Vestibule <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: ~~20BOM~~ (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: 2016 <br />Year Opened: 2009		\| FACP: Edwards EST3X <br /> FACP Location: Northwest Entrance Vestibule <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: 2016 <br />Year Opened: 2009
	\|}		\|}
	==System Specifications (2009 Expansion) (2009-persent)==		==System Specifications (2009 Expansion) (2009-persent)==
Line 44:		Line 44:
	All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.		All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.
	====Automatic Detection Devices====		====Automatic Detection Devices====
	None noticed.		None noticed. There is a sprinkler system with waterflow detection.
	~~[[]~~		==== Modules ====
			There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

Alberta Fire Alarms at 18:36, 15 December 2023

2023-12-15T18:36:58Z

← Older revision		Revision as of 12:36, 15 December 2023
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Edwards EST3 <br /> FACP Location: Unknown <br />System Type: ~~Hybrid-~~Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981		\| FACP: Edwards EST3 <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: 20BPM (First Stage) <br> Temporal (GA) <br> Strobes Synchronized <br />Date of last known Upgrade: Currently being upgraded<br />Year Opened: 1981
	\|}		\|}
	The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded in the 2000s. <br>Not: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''		The '''BMO Centre''' is a large convention centre located at 20 Roundup Way SE, Calgary, AB. It is located on the grounds of Stampede Park. The building hosts many events, such as car shows and other expos. The building originally opened in 1981, and was expanded in 2009. The building is currently undergoing a massive expansion, which caused Hall A to be demolished. The fire alarm system was upgraded in the 2000s. <br>Not: ''This page is accurate to July 2022, and does not contain any information on the system for the expansion. This page should not be used for official purposes.''
	==System Specifications (1981 building) (2000s-2023)==		==System Specifications (1981 building) (2000s-2023)==
	NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''		NOTE: ''This information is no longer accurate, as the system is currently in the process of a full upgrade. This page is accurate to July 2022.''

	====FACP====		====FACP====
	The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown. It replaced an EST2 in 2013 due to water damage from the 2013 floods. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The system coding is 20BPM in first stage, followed by temporal in general alarm.		The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown. It replaced an EST2 in 2013 due to water damage from the 2013 floods. The system runs EST’s Signature addressable protocol, and is configured for two-stage operation. The system coding is 20BPM in first stage, followed by temporal in general alarm.
Line 24:		Line 23:
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases. There is also a sprinkler system with waterflow detection.		There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases. There is also a sprinkler system with waterflow detection.

	==== Modules ====		==== Modules ====
	There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.		There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

	=== Accessories ===		=== Accessories ===
	There was an Edwards EBP6SA 6.5A booster panel located beside the 3-LCDANN, as there was an EST2 panel in its place prior to the floods.		There was an Edwards EBP6SA 6.5A booster panel located beside the 3-LCDANN, as there was an EST2 panel in its place prior to the floods.