Bob Bahan Aquatic & Fitness Centre - Revision history

TwentyThree33: New system has been installed, and is now confirmed!

2025-03-17T02:34:59Z

New system has been installed, and is now confirmed!

@@ Line 1: / Line 1: @@
 {| style="float:right;border:2px solid black"
 |-
@@ Line 5: / Line 40: @@
+|
 |-
-| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
+| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous<br>Strobes Synchronized: No <br />Date of last known Upgrade: N/A <br/> Year Installed: 2006 <br />Year Decommissioned: 2024
 |}
-'''Bob Bahan Aquatic & Fitness Centre''' is a swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000 and 2006, and was completely replaced in 2024.  Current system specifications will be added as soon as information becomes available.
 ==== FACP ====
-The building was protected by a Mircom FX-2000 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Mircom’s CLIP addressable protocol, and the system coding was continuous. <br>The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.
 ==== Notification Appliances ====
-Most notification appliances were Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd). <br>There were Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas. <br>There was an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.
 === Initiating Devices ===
 ==== Pull Stations ====
-Most pull stations were Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There was an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There was a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations were wired to Mircom MIX-M501MA addressable monitor modules. <br> There was a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.
 ==== Automatic Detection Devices ====
-==== EOLs ====
+There were Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br> There were Mircom MIX-5251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br> In areas with higher ambient temperatures, there were Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br> All above detectors are mounted on System Sensor B210LPA bases. <br> There was a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.
-There were Mircom MP-300 end of line resistor plates on all signal circuits.
 [[Category:Calgary]]
 [[Category:Recreation Centres]]

TwentyThree33 at 17:41, 17 November 2024

2024-11-17T17:41:39Z

← Older revision		Revision as of 11:41, 17 November 2024
Line 7:		Line 7:
	\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970		\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
	\|}		\|}
	'''Bob Bahan Aquatic & Fitness Centre''' is a ~~now closed~~ swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000 and 2006, and was completely replaced in 2024. Current system specifications will be added as soon as information becomes available.		'''Bob Bahan Aquatic & Fitness Centre''' is a swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000 and 2006, and was completely replaced in 2024. Current system specifications will be added as soon as information becomes available.
	== Former System Specifications (2006-2024) ==		== Former System Specifications (2006-2024) ==
	==== FACP ====		==== FACP ====

TwentyThree33 at 17:41, 17 November 2024

2024-11-17T17:41:27Z

← Older revision		Revision as of 11:41, 17 November 2024
Line 1:		Line 1:
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
	\|-		\|-
	! System Specifications		! Former System Specifications
	\|-		\|-
	\|		\|
Line 7:		Line 7:
	\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970		\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
	\|}		\|}
	'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and ~~again~~ in ~~2006~~.		'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000 and 2006, and was completely replaced in 2024. Current system specifications will be added as soon as information becomes available.
	== System Specifications (2006-~~present~~) ==		== Former System Specifications (2006-2024) ==
	==== FACP ====		==== FACP ====
	The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system ~~runs~~ Mircom’s CLIP addressable protocol, and the system coding is continuous. <br> The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.		The building was protected by a Mircom FX-2000 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Mircom’s CLIP addressable protocol, and the system coding was continuous. <br>The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.
	==== Notification Appliances ====		==== Notification Appliances ====
	Most notification appliances ~~are~~ Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-~~2415W~~-FR strobe plates (red, 15cd). <br> There ~~are~~ Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas. <br> There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.		Most notification appliances were Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd). <br>There were Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas. <br>There was an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	Most pull stations ~~are~~ Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations ~~are~~ wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.		Most pull stations were Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There was an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There was a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations were wired to Mircom MIX-M501MA addressable monitor modules. <br> There was a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There ~~are~~ Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br>There ~~are~~ Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br>In areas with higher ambient temperatures, there ~~are~~ Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br>All above detectors ~~are~~ mounted on System Sensor B710LPA bases. <br>There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.		There were Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br>There were Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br>In areas with higher ambient temperatures, there were Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br>All above detectors were mounted on System Sensor B710LPA bases. <br>There was a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.

	==== EOLs ====		==== EOLs ====
	There ~~are~~ Mircom MP-300 end of line resistor plates on all signal circuits.		There were Mircom MP-300 end of line resistor plates on all signal circuits.
	[[Category:Calgary]]		[[Category:Calgary]]
	[[Category:Swimming Pools]]		[[Category:Swimming Pools]]
	[[Category:Recreation Centres]]		[[Category:Recreation Centres]]

TwentyThree33 at 21:44, 8 September 2024

2024-09-08T21:44:25Z

← Older revision		Revision as of 15:44, 8 September 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970		\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
	\|}		\|}
	'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006.		'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006.
Line 16:		Line 16:
	==== Pull Stations ====		==== Pull Stations ====
	Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.		Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.
			==== Automatic Detection Devices ====
			There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br>There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br>In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br>All above detectors are mounted on System Sensor B710LPA bases. <br>There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.

	==== ~~Automatic Detection Devices~~ ====		==== EOLs ====
	There are Mircom ~~MIX~~-~~2251BA addressable photoelectric smoke detectors at the top~~ of each stairwell. <br> There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br> In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br> All above detectors are mounted on System Sensor B710LPA bases. <br> There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.		There are Mircom MP-300 end of line resistor plates on all signal circuits.
	[[Category:Calgary]]		[[Category:Calgary]]
	[[Category:Swimming Pools]]		[[Category:Swimming Pools]]
	[[Category:Recreation Centres]]		[[Category:Recreation Centres]]

TwentyThree33: /* Pull Stations */

2024-06-09T16:40:44Z

Pull Stations

← Older revision		Revision as of 10:40, 9 June 2024
Line 15:		Line 15:
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.		Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional. <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.

	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br> There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br> In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br> All above detectors are mounted on System Sensor B710LPA bases. <br> There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.		There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br> There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br> In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br> All above detectors are mounted on System Sensor B710LPA bases. <br> There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.

TwentyThree33 at 01:15, 24 May 2024

2024-05-24T01:15:32Z

← Older revision		Revision as of 19:15, 23 May 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970		\| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
	\|}		\|}

	'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006.		'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006.

	== System Specifications (2006-present) ==		== System Specifications (2006-present) ==

	==== FACP ====		==== FACP ====

	The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous. <br> The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.		The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous. <br> The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.

	==== Notification Appliances ====		==== Notification Appliances ====

	Most notification appliances are Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-2415W-FR strobe plates (red, 15cd). <br> There are Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas. <br> There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.		Most notification appliances are Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-2415W-FR strobe plates (red, 15cd). <br> There are Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas. <br> There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.

	=== Initiating Devices ===		=== Initiating Devices ===

	==== Pull Stations ====		==== Pull Stations ====

	Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.		Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional <br> There is an Edwards 270-SPOW conventional single-action pull station in the pool area. <br> There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. <br> All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. <br> There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.

	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====

	There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br> There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br> In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br> All above detectors are mounted on System Sensor B710LPA bases. <br> There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.		There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. <br> There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. <br> In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors <br> All above detectors are mounted on System Sensor B710LPA bases. <br> There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.
			[[Category:Calgary]]
			[[Category:Swimming Pools]]
			[[Category:Recreation Centres]]

Alberta Fire Alarms: BOB THE KNOB AND REMOVING MODULES AND KEEPING CONVENTIONAL PULLS ON ADDRESSABLE

2024-04-12T05:50:38Z

BOB THE KNOB AND REMOVING MODULES AND KEEPING CONVENTIONAL PULLS ON ADDRESSABLE

New page

{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: 2010s Year Opened: 1970
|}

'''Bob Bahan Aquatic & Fitness Centre''' is a now closed swimming pool & fitness centre located at 4812 14 Ave SE, Calgary, AB. It is owned and operated by the City of Calgary. The facility was built in 1970, and underwent a major renovation between 1999 and 2000. The fire alarm system was upgraded in 2000, and again in 2006.

== System Specifications (2006-present) ==

==== FACP ====

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous. The FX-2000 replaced a Simplex 4020 as part of an upgrade project for select buildings.

==== Notification Appliances ====

Most notification appliances are Simplex 2901-9723 motor bells (6” gong) mounted on Wheelock RSSP-2415W-FR strobe plates (red, 15cd). There are Mircom BL-10B motor bells (10” gong) mounted on Wheelock RSSP-24MCW-FR strobe plates (red, set to 15cd) as deficiency replacements in some areas. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an EST “Integrity” 403-5A-R strobe plate (15cd) in the basement mechanical room, also a deficiency replacement.

=== Initiating Devices ===

==== Pull Stations ====

Most pull stations are Simplex 2099-9795 addressable single-action pull stations, converted to conventional There is an Edwards 270-SPOW conventional single-action pull station in the pool area. There is a Fire-Lite MPS-950BF conventional pull station at the main entrance as a deficiency replacement. All above pull stations are wired to Mircom MIX-M501MA addressable monitor modules. There is a Mircom MS-401AP addressable single-action pull station at the east exit as a deficiency replacement.

==== Automatic Detection Devices ====

There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell. There are Mircom MIX-2251RBA addressable 135°F fixed temperature heat detectors throughout the building. In areas with higher ambient temperatures, there are Mircom MIX-5251HBA addressable 135°F fixed temperature heat detectors All above detectors are mounted on System Sensor B710LPA bases. There is a Mircom MIX-5351RAPA addressable 135°F fixed-temperature/rate of rise heat detector in the mechanical room, mounted on a System Sensor B300A-6 base as a deficiency replacement.