Centre Eleven - Revision history

TwentyThree33 at 23:26, 23 September 2024

2024-09-23T23:26:00Z

← Older revision		Revision as of 17:26, 23 September 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979		\| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979
	\|}		\|}
	'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.		'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.
Line 12:		Line 12:
	The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.		The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.

	The panel replaced a Mircom FA-1000 in 2023		The panel replaced a Mircom FA-1000 in 2023.
	=====Annunciators=====		=====Annunciators=====
	There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.		There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.
Line 35:		Line 35:
	There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas.		There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas.

	Most areas have Fire Detection Devices ~~CR135~~ conventional 135°F fixed/rate-of-rise heat detectors.		Most areas have Fire Detection Devices CR-135 conventional 135°F fixed/rate-of-rise heat detectors.
	==~~Code Violations~~==
	~~This building has horn/strobes and bells mixed. This is against code, as according to CAN~~-~~ULC codes, the sound~~ of ~~an alarm signal must be uniform~~		==== EOLs ====
			There are Edwards EOL-P1 end of line resistor plates on all circuits.
	[[Category:Calgary]]		[[Category:Calgary]]
	[[Category:Commercial]]		[[Category:Commercial]]

TwentyThree33 at 02:09, 24 May 2024

2024-05-24T02:09:48Z

← Older revision		Revision as of 20:09, 23 May 2024
Line 36:		Line 36:

	Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.		Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.

	==Code Violations==		==Code Violations==
	This building has horn/strobes and bells mixed. This is against code, as according to CAN-ULC codes, the sound of an alarm signal must be uniform		This building has horn/strobes and bells mixed. This is against code, as according to CAN-ULC codes, the sound of an alarm signal must be uniform
			[[Category:Calgary]]
			[[Category:Commercial]]

Alberta Fire Alarms at 06:48, 2 April 2024

2024-04-02T06:48:30Z

← Older revision		Revision as of 00:48, 2 April 2024
Line 10:		Line 10:
	==System Specifications (1979-present)==		==System Specifications (1979-present)==
	====FACP====		====FACP====
	The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. The panel replaced a Mircom FA-1000.		The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.

			The panel replaced a Mircom FA-1000 in 2023
	=====Annunciators=====		=====Annunciators=====
	There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.		There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.
Line 16:		Line 18:
	There is an Edwards BPS10A booster power supply in a closet on the first floor.		There is an Edwards BPS10A booster power supply in a closet on the first floor.
	====Notification Appliances====		====Notification Appliances====
	The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong)~~, and the~~ first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).		The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong).

			The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement.

			There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit.

			The parkade has Wheelock MB-G6-24 motor bells (6" gong).

			The first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	All pull stations but one are Edwards 270-SPO conventional single-action pull stations. There is an Edwards 274-111 conventional single-action pull station in a first floor unit.		All pull stations but one are Edwards 270-SPO conventional single-action pull stations.

			There is an Edwards 274-111 conventional single-action pull station in a first floor unit.
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.		There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas.
	~~[[]~~
			Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.

			==Code Violations==
			This building has horn/strobes and bells mixed. This is against code, as according to CAN-ULC codes, the sound of an alarm signal must be uniform

Alberta Fire Alarms at 04:49, 2 January 2024

2024-01-02T04:49:08Z

← Older revision		Revision as of 22:49, 1 January 2024
Line 8:		Line 8:
	\|}		\|}
	'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.		'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.
	==System Specifications==		==System Specifications (1979-present)==
	====FACP====		====FACP====
	The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. The panel replaced a Mircom FA-1000.		The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. The panel replaced a Mircom FA-1000.
Line 15:		Line 15:
	=====Booster Panels=====		=====Booster Panels=====
	There is an Edwards BPS10A booster power supply in a closet on the first floor.		There is an Edwards BPS10A booster power supply in a closet on the first floor.

	====Notification Appliances====		====Notification Appliances====
	The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong), and the first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).		The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong), and the first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====

Alberta Fire Alarms: /* FACP */

2023-09-07T19:54:26Z

FACP

← Older revision		Revision as of 13:54, 7 September 2023
Line 10:		Line 10:
	==System Specifications==		==System Specifications==
	====FACP====		====FACP====
	The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.		The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. The panel replaced a Mircom FA-1000.
	=====Annunciators=====		=====Annunciators=====
	There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.		There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.
	=====Booster Panels=====		=====Booster Panels=====
	There is an Edwards BPS10A booster power supply in a closet on the first floor.		There is an Edwards BPS10A booster power supply in a closet on the first floor.

	====Notification Appliances====		====Notification Appliances====
	The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong), and the first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).		The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong), and the first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).

TwentyThree33: Panel has been replaced since the page was made.

2023-09-06T22:10:11Z

Panel has been replaced since the page was made.

← Older revision		Revision as of 16:10, 6 September 2023
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Mircom FA-~~1000~~ <br /> FACP Location: Main Entrance <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: ~~2022~~ <br />Year Opened: 1979		\| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979
	\|}		\|}
			'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.
	'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original. ~~The fire alarm system is serviced by Viking Fire Protection.~~

	==System Specifications==		==System Specifications==
	====FACP====		====FACP====
	The building is protected by a Mircom FA-~~1000~~ conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.		The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.

	=====Annunciators=====		=====Annunciators=====
	There is a Mircom ~~RAM~~-~~1032TZDS~~ annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.		There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.

	=====Booster Panels=====		=====Booster Panels=====
	There is an Edwards BPS10A booster power supply in a closet on the first floor.		There is an Edwards BPS10A booster power supply in a closet on the first floor.
	====Notification Appliances====		====Notification Appliances====
	The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit.		The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong), and the first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).

	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	All pull stations but one are Edwards 270-SPO conventional single-action pull stations. There is an Edwards 274-111 conventional single-action pull station in a first floor unit.		All pull stations but one are Edwards 270-SPO conventional single-action pull stations. There is an Edwards 274-111 conventional single-action pull station in a first floor unit.

	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.		There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.
	[[]		[[]

Twentytwo22 at 19:58, 3 April 2023

2023-04-03T19:58:39Z

← Older revision		Revision as of 13:58, 3 April 2023
Line 28:		Line 28:
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.		There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.
	[[~~Category:Facilitie~~]		[[]

Twentytwo22 at 19:40, 3 April 2023

2023-04-03T19:40:48Z

← Older revision		Revision as of 13:40, 3 April 2023
Line 28:		Line 28:
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.		There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.
	[[Category:~~Facilities]~~]		[[Category:Facilitie]

Twentytwo22 at 22:01, 2 April 2023

2023-04-02T22:01:41Z

← Older revision		Revision as of 16:01, 2 April 2023
Line 28:		Line 28:
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.		There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.
			[[Category:Facilities]]

TwentyThree33: I didn't mind this panel. Worked fairly well.

2023-02-12T04:07:19Z

I didn't mind this panel. Worked fairly well.

New page

{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Mircom FA-1000 FACP Location: Main Entrance System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2022 Year Opened: 1979
|}

'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original. The fire alarm system is serviced by Viking Fire Protection.

==System Specifications==
====FACP====
The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.

=====Annunciators=====
There is a Mircom RAM-1032TZDS annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.

=====Booster Panels=====
There is an Edwards BPS10A booster power supply in a closet on the first floor.
====Notification Appliances====
The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit.

===Initiating Devices===
====Pull Stations====
All pull stations but one are Edwards 270-SPO conventional single-action pull stations. There is an Edwards 274-111 conventional single-action pull station in a first floor unit.

====Automatic Detection Devices====
There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135°F fixed/rate-of-rise heat detectors.