EQ Bank Tower - Revision history

TwentyThree33 at 23:59, 25 September 2024

2024-09-25T23:59:05Z

← Older revision		Revision as of 17:59, 25 September 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\|FACP: Mircom FX-2000 <br>FACP Location: Main Electrical Room <br>System Type: Hybrid <br>System Line Voltage: 120VAC <br>NAC Voltage: 24VFWR <br>System Coding: Continuous <br>Date of last known Upgrade: 2021 <br>Year Opened: 1980		\|FACP: Mircom FX-2000 <br>FACP Location: Main Electrical Room <br>System Type: Single-Stage Hybrid-Addressable <br>System Line Voltage: 120VAC <br>NAC Voltage: 24VFWR <br>System Coding: Continuous <br>Date of last known Upgrade: 2021 <br>Year Opened: 1980
	\|}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall, with an upgrade in the early 2000s.		\|}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall, with an upgrade in the early 2000s.
	==System Specifications==		==System Specifications==

TwentyThree33 at 21:56, 25 May 2024

2024-05-25T21:56:35Z

@@ Line 5: / Line 5: @@
+|
 |-
-|FACP: Mircom FX-2000
+|FACP: Mircom FX-2000 <br>FACP Location: Main Electrical Room <br>System Type: Hybrid <br>System Line Voltage: 120VAC <br>NAC Voltage: 24VFWR <br>System Coding: Continuous <br>Date of last known Upgrade: 2021 <br>Year Opened: 1980
 |}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall, with an upgrade in the early 2000s.
 ==System Specifications==
@@ Line 50: / Line 37: @@
 All detectors are mounted on System Sensor B210LPA bases.

Alberta Fire Alarms at 21:35, 9 February 2024

2024-02-09T21:35:32Z

← Older revision		Revision as of 15:35, 9 February 2024
Line 14:		Line 14:
	NAC Voltage: 24VFWR		NAC Voltage: 24VFWR

	System Coding: ~~Steady~~		System Coding: Continuous

	~~Strobes Synchronized: N/A~~

	Date of last known Upgrade: 2021		Date of last known Upgrade: 2021

	Year Opened: 1980		Year Opened: 1980
	\|}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall.		\|}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall, with an upgrade in the early 2000s.
	==System Specifications==		==System Specifications==
	===FACP===		===FACP===
Line 28:		Line 26:
	Based on the devices, the FX-2000 most definitely replaced the original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator.		Based on the devices, the FX-2000 most definitely replaced the original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator.
	=====Annunciators=====		=====Annunciators=====
	There is ~~one~~ RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet.		There is a Mircom RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet.
	====Notification Appliances====		====Notification Appliances====
	Most notification appliances are Mircom BL-10A and BL-10B motor bells (10" gong).		Most notification appliances are Mircom BL-10A motor bells (10" gong) and BL-10B motor bells (10" gong).

	There are a few Mircom BL-6A/BL-6B motor bells (6" gong) mixed in.		There are a few Mircom BL-6A motor bells (6" gong) and BL-6B motor bells (6" gong) mixed in.
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
Line 45:		Line 43:
	There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.		There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.
	====== Addressable ======		====== Addressable ======
	There are of Mircom MIX-2251BA ~~(photo)~~ detectors installed on the 4rd floor.		There are Mircom MIX-2251BA addressable photelectric smoke detectors installed on the 4rd floor.

	There is a Mircom MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances, along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room.		There is a Mircom MIX-5351RAPA addressable rate-of-rise heat detector recently installed at one of the tenant entrances, along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room.

	Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.		Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.

	All detectors are mounted on System Sensor B210LPA bases.		All detectors are mounted on System Sensor B210LPA bases.

Alberta Fire Alarms: /* System Specifications */

2024-02-09T03:41:41Z

System Specifications

← Older revision		Revision as of 21:41, 8 February 2024
Line 24:		Line 24:
	==System Specifications==		==System Specifications==
	===FACP===		===FACP===
	The building is protected by a Mircom FX-2000 hybrid addressable fire alarm system. The panel is located in the main electrical room, and is in a BBX-1072A cabinet. ~~Despite being an addressable panel, the~~ system is mostly conventional ~~but~~ the main and ~~fourth~~ floors ~~have been converted to~~ addressable. It was likely installed in the early 2000s~~. From the devices installed throughout, it is most definitely an original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator~~. The addressable parts of this system run Mircom's CLIP addressable protocol, and the system coding is continuous.		The building is protected by a Mircom FX-2000 hybrid addressable fire alarm system. The panel is located in the main electrical room, and is in a BBX-1072A cabinet.The system is mostly wired as conventional, with the main and 4th floors being fully addressable. It was likely installed in the early 2000s. The addressable parts of this system run Mircom's CLIP addressable protocol, and the system coding is continuous.

			Based on the devices, the FX-2000 most definitely replaced the original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator.
	=====Annunciators=====		=====Annunciators=====
	There is one RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet.		There is one RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet.
Line 43:		Line 45:
	There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.		There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.
	====== Addressable ======		====== Addressable ======
	There are of Mircom MIX-~~2251AP~~ (photo) detectors installed on the 4rd floor.		There are of Mircom MIX-2251BA (photo) detectors installed on the 4rd floor.

			There is a Mircom MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances, along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room.

			Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.

	~~One Mircom MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances~~. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.		All detectors are mounted on System Sensor B210LPA bases.
	~~[[]~~

Alberta Fire Alarms at 02:47, 9 February 2024

2024-02-09T02:47:17Z

← Older revision		Revision as of 20:47, 8 February 2024
Line 20:		Line 20:
	Date of last known Upgrade: 2021		Date of last known Upgrade: 2021

	Year Opened: ~~c. 1979-1981~~		Year Opened: 1980
	\|}'''EQ Bank Tower''' is a multi-story tower in Downtown Calgary it was built 79-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall.		\|}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall.
	==System Specifications==		==System Specifications==
	===FACP===		===FACP===
	The ~~fire alarm control unit~~ is a Mircom FX-2000 in a BBX-1072A cabinet. Despite being an addressable panel, the system is mostly conventional but the main and fourth floors have been converted to addressable. It was likely installed in the early 2000s. From the devices installed throughout, it is most definitely an original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator. The addressable parts of this system run Mircom's ~~Advanced~~ addressable protocol, and the system coding is continuous.		The building is protected by a Mircom FX-2000 hybrid addressable fire alarm system. The panel is located in the main electrical room, and is in a BBX-1072A cabinet. Despite being an addressable panel, the system is mostly conventional but the main and fourth floors have been converted to addressable. It was likely installed in the early 2000s. From the devices installed throughout, it is most definitely an original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator. The addressable parts of this system run Mircom's CLIP addressable protocol, and the system coding is continuous.
	=====Annunciators=====		=====Annunciators=====
	There is one RAX-LCD in the front lobby. Mounted to the front door of the old ~~6500~~ annunciator cabinet.		There is one RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet.
	====Notification Appliances====		====Notification Appliances====
	~~There is a mix of mostly~~ Mircom BL-10A and BL-10B motor bells ~~with~~ a few BL-6A/B (6~~-inch~~) ~~motor bells~~ mixed in.		Most notification appliances are Mircom BL-10A and BL-10B motor bells (10" gong).

			There are a few Mircom BL-6A/BL-6B motor bells (6" gong) mixed in.
	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	====== Conventional ======		====== Conventional ======
	About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod. There are a few Mircom MS-401 (single-action) replacements.		About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod.

			There are a few Mircom MS-401 single-action pull stations as deficiency replacements.
	====== Addressable ======		====== Addressable ======
	There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and 4th floors		There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and 4th floors.
	====Automatic Detection Devices====		====Automatic Detection Devices====
	====== Conventional ======		====== Conventional ======
	There is an equal variety of Edwards ~~280 series~~ and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.		There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.
	====== Addressable ======		====== Addressable ======
	There are of Mircom MIX-2251AP (photo) detectors installed on the 4rd floor. One MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.		There are of Mircom MIX-2251AP (photo) detectors installed on the 4rd floor.

			One Mircom MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.
	[[]		[[]

Twentytwo22: /* Addressable */

2024-02-09T01:58:20Z

Addressable

← Older revision		Revision as of 19:58, 8 February 2024
Line 39:		Line 39:
	There is an equal variety of Edwards 280 series and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.		There is an equal variety of Edwards 280 series and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.
	====== Addressable ======		====== Addressable ======
	There are of Mircom MIX-2251AP (photo) detectors installed on the ~~3rd~~ floor. One MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.		There are of Mircom MIX-2251AP (photo) detectors installed on the 4rd floor. One MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.
	[[]		[[]

Twentytwo22 at 01:57, 9 February 2024

2024-02-09T01:57:37Z

← Older revision		Revision as of 19:57, 8 February 2024
Line 21:		Line 21:

	Year Opened: c. 1979-1981		Year Opened: c. 1979-1981
	\|}'''EQ Bank Tower''' is a multi-story tower in Downtown Calgary it was built 1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall.		\|}'''EQ Bank Tower''' is a multi-story tower in Downtown Calgary it was built 79-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall.
	==System Specifications==		==System Specifications==
	===FACP===		===FACP===

Twentytwo22 at 01:57, 9 February 2024

2024-02-09T01:57:16Z

← Older revision		Revision as of 19:57, 8 February 2024
Line 21:		Line 21:

	Year Opened: c. 1979-1981		Year Opened: c. 1979-1981
	\|}'''EQ Bank Tower''' is a multi-story tower in Downtown Calgary it was built ~~circa. 1979-1981~~ according to building officials and verified with historical aerial imagery. The system is 60% original overall.		\|}'''EQ Bank Tower''' is a multi-story tower in Downtown Calgary it was built 1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall.
	==System Specifications==		==System Specifications==
	===FACP===		===FACP===

Twentytwo22: /* FACP */

2024-02-09T01:56:40Z

FACP

← Older revision		Revision as of 19:56, 8 February 2024
Line 24:		Line 24:
	==System Specifications==		==System Specifications==
	===FACP===		===FACP===
	The fire alarm control unit is a Mircom FX-2000 in a BBX-1072A cabinet. Despite being an addressable panel, the system is mostly conventional but the main and ~~second~~ floors have been converted to addressable. It was likely installed in the early 2000s. From the devices installed throughout, it ~~appears to have replaced~~ an ~~Original~~ Edwards 6500. The addressable parts of this system run Mircom's Advanced addressable protocol, and the system coding is continuous.		The fire alarm control unit is a Mircom FX-2000 in a BBX-1072A cabinet. Despite being an addressable panel, the system is mostly conventional but the main and fourth floors have been converted to addressable. It was likely installed in the early 2000s. From the devices installed throughout, it is most definitely an original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator. The addressable parts of this system run Mircom's Advanced addressable protocol, and the system coding is continuous.
	=====Annunciators=====		=====Annunciators=====
	There is one RAX-LCD in the front lobby. Mounted to the front door of the old 6500 annunciator cabinet.		There is one RAX-LCD in the front lobby. Mounted to the front door of the old 6500 annunciator cabinet.
Line 34:		Line 34:
	About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod. There are a few Mircom MS-401 (single-action) replacements.		About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod. There are a few Mircom MS-401 (single-action) replacements.
	====== Addressable ======		====== Addressable ======
	There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and ~~2nd~~ floors		There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and 4th floors
	====Automatic Detection Devices====		====Automatic Detection Devices====
	====== Conventional ======		====== Conventional ======

Twentytwo22 at 19:58, 3 April 2023

2023-04-03T19:58:40Z

← Older revision		Revision as of 13:58, 3 April 2023
Line 40:		Line 40:
	====== Addressable ======		====== Addressable ======
	There are of Mircom MIX-2251AP (photo) detectors installed on the 3rd floor. One MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.		There are of Mircom MIX-2251AP (photo) detectors installed on the 3rd floor. One MIX-5351RAPA (rate of rise) heat detector recently installed at one of the tenant entrances. Along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.
	[[~~Category:Facilitie~~]		[[]