Alberta Fire Alarms: Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: EST iO500
FACP Location: Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2014
Year Opened: 2010 |} OCL is a general contracting company. This page will cover the fabrication shop, located at 21314 T..."

2025-03-01T08:14:42Z

Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: EST iO500 FACP Location: Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Genesis Date of last known Upgrade: 2014 Year Opened: 2010 |} OCL is a general contracting company. This page will cover the fabrication shop, located at 21314 T..."

New page

{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: EST iO500 FACP Location: Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Genesis Date of last known Upgrade: 2014 Year Opened: 2010
|}

OCL is a general contracting company. This page will cover the fabrication shop, located at 21314 Township Road 554, Fort Saskatchewan, AB. The shop was built in 2010, and the fire alarm system is mostly original with a panel replacement in 2012.

== System Specifications (2010-present) ==

==== FACP ====

The building is protected by an EST iO500 addressable fire alarm system. The panel is located in the electrical room. The system runs EST's Signature addressable protocol, and the system coding is temporal. This panel replaced the original EST QuickStart QS1 in 2012.

==== Notification Appliances ====

All indoor notification appliances are Edwards "Genesis" G1-HDVM horn/strobes (white, wall-mount, no marking, set to 15cd). For exterior notification, there is an Edwards "Integrity" 757-7A-T horn/strobe (red, wall-mount, 15/75cd) outside the south end of the shop.

=== Initiating Devices ===

==== Pull Stations ====

All pull stations are EST SIGA-270 addressable single-action pull stations.

==== Automatic Detection Devices ====

There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors throughout the working area. There is an EST SIGA-IPHS 4D addressable multisensor smoke/heat detector in the electrical room, installed in 2014. All detectors are mounted on EST SIGA-SB bases.

==== EOLs ====

There is an Edwards EOL-P1 end-of-line resistor plate on the signal circuit.

[[Category:Industrial]]
[[Category:Fort Saskatchewan]]

OCL Fabrication Shop - Revision history