Oilfields General Hospital - Revision history

Alberta Fire Alarms at 05:10, 9 August 2025

2025-08-09T05:10:38Z

← Older revision		Revision as of 23:10, 8 August 2025
Line 72:		Line 72:
	[[Category:Alberta]]		[[Category:Alberta]]
	[[Category:Healthcare]]		[[Category:Healthcare]]
			[[Category:Edwards]]

TwentyThree33: Added additional information found during the 2024 annual inspection. Changed date of upgrade as system was commissioned and verified in August of 2012.

2024-12-06T19:17:26Z

Added additional information found during the 2024 annual inspection. Changed date of upgrade as system was commissioned and verified in August of 2012.

← Older revision		Revision as of 13:17, 6 December 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Edwards EST3 <br />FACP Location: Maintenance Office <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> Temporal (Alarm) <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: ~~2010~~ <br />Year Opened: 1984, 1991		\| FACP: Edwards EST3 <br />FACP Location: Maintenance Office <br />System Type: Two-Stage Hybrid-Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> Temporal (Alarm) <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2012 <br />Year Opened: 1984, 1991
	\|}		\|}
	'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in ~~2010~~.		'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in 2012.
	==System Specifications (~~2010~~-present)==		==System Specifications (2012-present)==
	====FACP====		====FACP====
	The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located in the maintenance office. The system runs Edwards’ Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.		The building is protected by an Edwards EST3 hybrid-addressable fire alarm system. The panel is located in the maintenance office. The system runs Edwards’ Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.
	=====Annunciators=====		=====Annunciators=====
	There are Edwards EST3-LCDANN annunciators at all nurse’s stations and in the main entrance vestibule. All annunciators are equipped with Edwards LCDXL1 displays.		There are Edwards EST3-LCDANN annunciators at all nurse’s stations and in the main entrance vestibule. All annunciators are equipped with Edwards LCDXL1 displays.

			===== Booster Panels =====
			There is an Edwards BPS6A 6-amp booster power supply located next to the main FACP.

	====Notification Appliances====		====Notification Appliances====
	All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).		All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
Line 19:		Line 23:
	All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.		All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are EST SIGA-PS addressable photoelectric smoke detectors in ~~most~~ areas. There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas. All detectors are mounted on EST SIGA-SB bases.		There are EST SIGA-PS addressable photoelectric smoke detectors in all corridors, patient rooms, elevator shafts, and some other areas.

			Some areas mentioned above have Edwards SIGA-PD addressable photoelectric smoke detectors as deficiency replacements.

			There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas, including electrical rooms, storage rooms, telecom rooms, linen closets, and the ambulance bay.

			All aforementioned detectors are mounted on EST SIGA-SB bases.

			There are EST "SuperDuct" SIGA-SD addressable photoelectric duct smoke detectors on all air handling units. The devices are located in the penthouse, and are equipped with EST SIGA-LED remote indicators.

			There are Edwards 284B-PL conventional 194°F fixed-temperature heat detectors in all crawlspaces, the penthouse, and the basement mechanical room.

			There are FDD CF-200-EWP conventional 200°F fixed-temperature explosion-proof heat detectors in the gas meter room and the oxygen storage room.

	====Modules====		====Modules====
	There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler ~~system’s~~ tamper and flow switches.		There are EST SIGA-CT1 addressable monitor modules supervising all conventional heat detectors, the kitchen suppression system, and the sprinkler system's tamper and flow switches.

			There are EST SIGA-CR addressable relay modules serving various purposes, including elevator recall and fan shutdowns.

			There are EST SIGA-IM addressable isolator modules on all SLCs.

	==== EOLs ====		==== EOLs ====
	There are Edwards EOL-P1 end of line resistor plates on all ~~sprinkler~~ and signal circuits.		There are Edwards EOL-P1 end of line resistor plates on all circuits supervised by monitor modules, and all signal circuits.

	==Former System Specifications (1984-~~2010~~)==		==Former System Specifications (1984-2012)==
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
	\|-		\|-
Line 38:		Line 59:
	The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel was located in the maintenance office. The system was configured for two-stage operation. The alert coding was 20BPM, and the alarm coding was 120BPM march time.		The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel was located in the maintenance office. The system was configured for two-stage operation. The alert coding was 20BPM, and the alarm coding was 120BPM march time.
	=====Annunciators=====		=====Annunciators=====
	There were Edwards annunciators in some areas~~, model to be confirmed. Some of these are still installed, but disconnected~~.		There were Edwards 456 annunciators in some areas.
	====Notification Appliances====		====Notification Appliances====
	All notification appliances were Edwards “Adaptabel” 333D single-stroke bells (6” gong).		All notification appliances were Edwards “Adaptabel” 333D single-stroke bells (6” gong).

Alberta Fire Alarms at 01:31, 10 October 2024

2024-10-10T01:31:30Z

← Older revision		Revision as of 19:31, 9 October 2024
Line 5:		Line 5:
	\|		\|
	\|-		\|-
	\| FACP: Edwards EST3 <br />FACP Location: Maintenance Office <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> Temporal (Alarm) <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2010 <br />Year Opened: 1984, 1991		\| FACP: Edwards EST3 <br />FACP Location: Maintenance Office <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> Temporal (Alarm) <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2010 <br />Year Opened: 1984, 1991
	\|}		\|}
	'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in 2010.		'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in 2010.
Line 22:		Line 22:
	====Modules====		====Modules====
	There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.		There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

			==== EOLs ====
			There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.

	==Former System Specifications (1984-2010)==		==Former System Specifications (1984-2010)==
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
Line 29:		Line 33:
	\|		\|
	\|-		\|-
	\| FACP: Edwards Custom 6500 <br />FACP Location: Maintenance Office <br />System Type: Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> 120BPM March Time (Alarm) <br>Strobes Synchronized: N/A <br />Year Installed: 1984 <br />Year Decommissioned: 2010		\| FACP: Edwards Custom 6500 <br />FACP Location: Maintenance Office <br />System Type: Two-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> 120BPM March Time (Alarm) <br>Strobes Synchronized: N/A <br />Year Installed: 1984 <br />Year Decommissioned: 2010
	\|}		\|}
	====FACP====		====FACP====
Line 42:		Line 46:
	====Automatic Detection Devices====		====Automatic Detection Devices====
	There were System Sensor 1400A conventional ionization smoke detectors in some areas. Most areas had Edwards 281C conventional heat detectors. There were Edwards 6260B-100 duct smoke detectors with 6250C heads on all air handling units.		There were System Sensor 1400A conventional ionization smoke detectors in some areas. Most areas had Edwards 281C conventional heat detectors. There were Edwards 6260B-100 duct smoke detectors with 6250C heads on all air handling units.

			==== EOLs ====
			There were Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.
	[[Category:Alberta]]		[[Category:Alberta]]
	[[Category:Healthcare]]		[[Category:Healthcare]]

TwentyThree33 at 22:23, 26 May 2024

2024-05-26T22:23:42Z

← Older revision		Revision as of 16:23, 26 May 2024
Line 7:		Line 7:
	\| FACP: Edwards EST3 <br />FACP Location: Maintenance Office <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> Temporal (Alarm) <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2010 <br />Year Opened: 1984, 1991		\| FACP: Edwards EST3 <br />FACP Location: Maintenance Office <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> Temporal (Alarm) <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2010 <br />Year Opened: 1984, 1991
	\|}		\|}
			'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in 2010.
	'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in 2010.

	==System Specifications (2010-present)==		==System Specifications (2010-present)==
	====FACP====		====FACP====
	The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located in the maintenance office. The system runs Edwards’ Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.		The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located in the maintenance office. The system runs Edwards’ Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.

	=====Annunciators=====		=====Annunciators=====
	There are Edwards EST3-LCDANN annunciators at all nurse’s stations and in the main entrance vestibule. All annunciators are equipped with Edwards LCDXL1 displays.		There are Edwards EST3-LCDANN annunciators at all nurse’s stations and in the main entrance vestibule. All annunciators are equipped with Edwards LCDXL1 displays.

	====Notification Appliances====		====Notification Appliances====
	All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).		All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.		All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

	====Automatic Detection Devices====		====Automatic Detection Devices====
	There are EST SIGA-PS addressable photoelectric smoke detectors in most areas. There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas. All detectors are mounted on EST SIGA-SB bases.		There are EST SIGA-PS addressable photoelectric smoke detectors in most areas. There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas. All detectors are mounted on EST SIGA-SB bases.

	====Modules====		====Modules====
	There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.		There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

	==Former System Specifications (1984-2010)==		==Former System Specifications (1984-2010)==
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
Line 39:		Line 31:
	\| FACP: Edwards Custom 6500 <br />FACP Location: Maintenance Office <br />System Type: Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> 120BPM March Time (Alarm) <br>Strobes Synchronized: N/A <br />Year Installed: 1984 <br />Year Decommissioned: 2010		\| FACP: Edwards Custom 6500 <br />FACP Location: Maintenance Office <br />System Type: Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (Alert) <br> 120BPM March Time (Alarm) <br>Strobes Synchronized: N/A <br />Year Installed: 1984 <br />Year Decommissioned: 2010
	\|}		\|}

	====FACP====		====FACP====
	The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel was located in the maintenance office. The system was configured for two-stage operation. The alert coding was 20BPM, and the alarm coding was 120BPM march time.		The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel was located in the maintenance office. The system was configured for two-stage operation. The alert coding was 20BPM, and the alarm coding was 120BPM march time.

	=====Annunciators=====		=====Annunciators=====
	There were Edwards annunciators in some areas, model to be confirmed. Some of these are still installed, but disconnected.		There were Edwards annunciators in some areas, model to be confirmed. Some of these are still installed, but disconnected.

	====Notification Appliances====		====Notification Appliances====
	All notification appliances were Edwards “Adaptabel” 333D single-stroke bells (6” gong).		All notification appliances were Edwards “Adaptabel” 333D single-stroke bells (6” gong).

	===Initiating Devices===		===Initiating Devices===
	====Pull Stations====		====Pull Stations====
	All pull stations were Edwards 270-GAO conventional two-stage single-action pull stations.		All pull stations were Edwards 270-GAO conventional two-stage single-action pull stations.

	====Automatic Detection Devices====		====Automatic Detection Devices====
	There were System Sensor 1400A conventional ionization smoke detectors in some areas. Most areas had Edwards 281C conventional heat detectors. There were Edwards 6260B-100 duct smoke detectors with 6250C heads on all air handling units.		There were System Sensor 1400A conventional ionization smoke detectors in some areas. Most areas had Edwards 281C conventional heat detectors. There were Edwards 6260B-100 duct smoke detectors with 6250C heads on all air handling units.
			[[Category:Alberta]]
			[[Category:Healthcare]]

Alberta Fire Alarms: AAAAAAA WHY HORN/STROBES IN A HOSPITAL

2024-01-25T16:17:49Z

AAAAAAA WHY HORN/STROBES IN A HOSPITAL

New page

{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Edwards EST3 FACP Location: Maintenance Office System Type: Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: 20BPM (Alert) Temporal (Alarm) Strobes Synchronized: Yes, Genesis Date of last known Upgrade: 2010 Year Opened: 1984, 1991
|}

'''Oilfields General Hospital''' is a hospital located at 717 Government Road, in Black Diamond, Alberta, Canada. The hospital is owned and operated by Alberta Health Services. The hospital was built in 1984, and expanded in 1991. The fire alarm system was upgraded in 2010.

==System Specifications (2010-present)==
====FACP====
The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located in the maintenance office. The system runs Edwards’ Signature addressable protocol, and is configured for two-stage operation. The alert coding is 20BPM, and the alarm coding is temporal.

=====Annunciators=====
There are Edwards EST3-LCDANN annunciators at all nurse’s stations and in the main entrance vestibule. All annunciators are equipped with Edwards LCDXL1 displays.

====Notification Appliances====
All notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

===Initiating Devices===
====Pull Stations====
All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

====Automatic Detection Devices====
There are EST SIGA-PS addressable photoelectric smoke detectors in most areas. There are EST SIGA-HRS addressable 135°F fixed-temperature/rate-of-rise heat detectors in some areas. All detectors are mounted on EST SIGA-SB bases.

====Modules====
There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

==Former System Specifications (1984-2010)==
{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Edwards Custom 6500 FACP Location: Maintenance Office System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: 20BPM (Alert) 120BPM March Time (Alarm) Strobes Synchronized: N/A Year Installed: 1984 Year Decommissioned: 2010
|}

====FACP====
The building was protected by an Edwards Custom 6500 conventional fire alarm system. The panel was located in the maintenance office. The system was configured for two-stage operation. The alert coding was 20BPM, and the alarm coding was 120BPM march time.

=====Annunciators=====
There were Edwards annunciators in some areas, model to be confirmed. Some of these are still installed, but disconnected.

====Notification Appliances====
All notification appliances were Edwards “Adaptabel” 333D single-stroke bells (6” gong).

===Initiating Devices===
====Pull Stations====
All pull stations were Edwards 270-GAO conventional two-stage single-action pull stations.

====Automatic Detection Devices====
There were System Sensor 1400A conventional ionization smoke detectors in some areas. Most areas had Edwards 281C conventional heat detectors. There were Edwards 6260B-100 duct smoke detectors with 6250C heads on all air handling units.