Alberta Fire Alarms: Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards FireShield Plus FSP1004G
FACP Location: G2 Rear Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: Late 2010s
Most Recent Known Modification: N/A
Year Opened: 1977 |} '''Raintree Village''' is..."

2025-06-01T06:15:20Z

Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Edwards FireShield Plus FSP1004G FACP Location: G2 Rear Entrance System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Genesis Date of last known Upgrade: Late 2010s Most Recent Known Modification: N/A Year Opened: 1977 |} '''Raintree Village''' is..."

New page

{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: Edwards FireShield Plus FSP1004G FACP Location: G2 Rear Entrance System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Genesis Date of last known Upgrade: Late 2010s Most Recent Known Modification: N/A Year Opened: 1977
|}

'''Raintree Village''' is an apartment building complex located at 6651 Ranchview Drive NW, Calgary, Alberta. This page will cover building G. The building was completed in 1977, and the fire alarm system is partially original, with an upgrade taking place in the late 2010s.

== System Specifications ==

==== FACP ====

The building is protected by an Edwards FireShield Plus FSP1004G conventional fire alarm system. The panel is located at the rear entrance of G2. The system coding is temporal.

==== Notification Appliances ====

All notification appliances are Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd), mounted on Edwards G1RT trim plates (red, no marking).

=== Initiating Devices ===

==== Pull Stations ====

All pull stations are Edwards 270-SPO conventional single-action pull stations.

==== Automatic Detection Devices ====

There are System Sensor C2W-BA conventional photoelectric smoke detectors in the corridors on each floor. There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors at the top of each stairwell. There are Mirtone 73330 conventional 135°F fixed-temperature heat detectors in the electrical and laundry rooms of each building. The mechanical rooms have FDD CF-200W conventional 200°F fixed-temperature heat detectors.

[[Category:Residential]]
[[Category:Calgary]]

Raintree Village Building G - Revision history