TwentyThree33's Basement - Revision history

TwentyThree33: Fuck typing on mobile

2023-01-16T23:32:40Z

Fuck typing on mobile

← Older revision		Revision as of 17:32, 16 January 2023
Line 19:		Line 19:
	The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.

	~~In late 2022, the~~ panel may be replaced with a Notifier NFS2-~~640C, following the upgrade at [[Marlborough Mall]]. This will only occur if~~ the ~~NFS2-640C is running on a software version that is compatible with Verifire 5.7~~.		This panel may be replaced with a Notifier NFS2-3030C in the coming weeks.

	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Siemens ZR-MC-W-B, Wheelock MT-241575W-FR, Edwards 757-5A-T, System Sensor SRA, Kidde "Genesis" EG1R-VM, Edwards 892-2B, Simplex 4903-9219, and System Sensor P4RLA.		The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Siemens ZR-MC-W-B, Wheelock MT-241575W-FR, Edwards 757-5A-T, System Sensor SRA, Kidde "Genesis" EG1R-VM, Edwards 892-2B, Simplex 4903-9219, and System Sensor P4RLA.

Twentytwo22: Added proper demo box. Also, stop being so cringy with the do not pull fire alarms shit. This is a documentation site. We don't need to remind people of the obvious. If I catch one of you doing it again. I'll bitch you out.

2022-12-09T06:32:20Z

Added proper demo box. Also, stop being so cringy with the do not pull fire alarms shit. This is a documentation site. We don't need to remind people of the obvious. If I catch one of you doing it again. I'll bitch you out.

← Older revision		Revision as of 00:32, 9 December 2022
Line 1:		Line 1:
			{\| cellspacing="5" cellpadding="0" style="margin: 0em 0em 1em 0em; border: 1px solid #1DA0E7; background: #B3DDF4; width: 100%"
			\| '''''This is a hobby system and is not powered on 24/7 and therefore does not provide any reliable fire protection. This page is for demonstration purposes only.'''''
			\|}
	[[Category:Hobby]]		[[Category:Hobby]]
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
Line 14:		Line 16:
	'''YYCsFireAlarmNimrod's Basement (name may be subject to change)''' is a basement in Calgary, built in 2003. It has a mini fire alarm system owned and serviced by [[User:Yycsfirealarmnimrod\|User:YYCsFireAlarmNimrod]].		'''YYCsFireAlarmNimrod's Basement (name may be subject to change)''' is a basement in Calgary, built in 2003. It has a mini fire alarm system owned and serviced by [[User:Yycsfirealarmnimrod\|User:YYCsFireAlarmNimrod]].
	== System Specifications ==		== System Specifications ==
	*Note: This is not a life safety system. This system is for demonstration purposes only. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.
	==== FACP ====		==== FACP ====
	The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.

Twentytwo22 at 06:20, 9 December 2022

2022-12-09T06:20:19Z

← Older revision		Revision as of 00:20, 9 December 2022
Line 1:		Line 1:
	~~{{Ambox{{\sandbox}}~~
	~~\| nocat = true~~
	~~\| type = content~~
	~~\| text = type=<u>content</u> — Content issues, such as {{tl\|Update}} and {{tl\|Expand}}.~~
	}}
	[[Category:Hobby]]		[[Category:Hobby]]
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"

Twentytwo22 at 06:16, 9 December 2022

2022-12-09T06:16:14Z

← Older revision		Revision as of 00:16, 9 December 2022
Line 1:		Line 1:
			{{Ambox{{\sandbox}}
			\| nocat = true
			\| type = content
			\| text = type=<u>content</u> — Content issues, such as {{tl\|Update}} and {{tl\|Expand}}.
			}}
	[[Category:Hobby]]		[[Category:Hobby]]
	{\| style="float:right;border:2px solid black"		{\| style="float:right;border:2px solid black"
Line 13:		Line 18:
	'''YYCsFireAlarmNimrod's Basement (name may be subject to change)''' is a basement in Calgary, built in 2003. It has a mini fire alarm system owned and serviced by [[User:Yycsfirealarmnimrod\|User:YYCsFireAlarmNimrod]].		'''YYCsFireAlarmNimrod's Basement (name may be subject to change)''' is a basement in Calgary, built in 2003. It has a mini fire alarm system owned and serviced by [[User:Yycsfirealarmnimrod\|User:YYCsFireAlarmNimrod]].
	== System Specifications ==		== System Specifications ==
	*Note: This is not a life safety system. This system is for demonstration purposes only. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.		*Note: This is not a life safety system. This system is for demonstration purposes only. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.
	==== FACP ====		==== FACP ====
	The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.

	In late 2022, the panel may be replaced with a Notifier NFS2-640C, following the upgrade at [[Marlborough Mall]]. This will only occur if the NFS2-640C is running on a software version that is compatible with Verifire 5.7.		In late 2022, the panel may be replaced with a Notifier NFS2-640C, following the upgrade at [[Marlborough Mall]]. This will only occur if the NFS2-640C is running on a software version that is compatible with Verifire 5.7.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Siemens ZR-MC-W-B, Wheelock MT-241575W-FR, Edwards 757-5A-T, System Sensor SRA, Kidde "Genesis" EG1R-VM, Edwards 892-2B, Simplex 4903-9219, and System Sensor P4RLA.		The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Siemens ZR-MC-W-B, Wheelock MT-241575W-FR, Edwards 757-5A-T, System Sensor SRA, Kidde "Genesis" EG1R-VM, Edwards 892-2B, Simplex 4903-9219, and System Sensor P4RLA.

TwentyThree33: TwentyThree33 moved page YYCsFireAlarmNimrod's Basement to TwentyThree33's Basement without leaving a redirect: Page moved due to new username.

2022-12-05T21:40:18Z

TwentyThree33 moved page YYCsFireAlarmNimrod's Basement to TwentyThree33's Basement without leaving a redirect: Page moved due to new username.

← Older revision	Revision as of 15:40, 5 December 2022
(No difference)

TwentyThree33: Redid the FACP and Notification Appliance sections of the page.

2022-02-28T21:00:43Z

Redid the FACP and Notification Appliance sections of the page.

← Older revision		Revision as of 15:00, 28 February 2022
Line 13:		Line 13:
	'''YYCsFireAlarmNimrod's Basement (name may be subject to change)''' is a basement in Calgary, built in 2003. It has a mini fire alarm system owned and serviced by [[User:Yycsfirealarmnimrod\|User:YYCsFireAlarmNimrod]].		'''YYCsFireAlarmNimrod's Basement (name may be subject to change)''' is a basement in Calgary, built in 2003. It has a mini fire alarm system owned and serviced by [[User:Yycsfirealarmnimrod\|User:YYCsFireAlarmNimrod]].
	== System Specifications ==		== System Specifications ==
	*Note: ~~YYCsFireAlarmNimrod frequently modifies the fire alarm~~ system~~, hence the "can range from" and "usually consist" parts~~. ~~He is currently receiving about 30 new parts, which will be used on the~~ system~~. Although he frequently modifies it, it~~ is ~~always powered up~~. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.		*Note: This is not a life safety system. This system is for demonstration purposes only. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.
	==== FACP ====		==== FACP ====
	The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. When in alarm, the system does march time.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. This is the third panel this system has had since it was installed in August 2020. The previous panel was a Simplex 4010, and the original panel was a Fire-Lite MS-4. The system runs Notifier's CLIP addressable protocol. When in alarm, the system does march time.

			In late 2022, the panel may be replaced with a Notifier NFS2-640C, following the upgrade at [[Marlborough Mall]]. This will only occur if the NFS2-640C is running on a software version that is compatible with Verifire 5.7.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: ~~Gentex "Commander 3" GEC3~~-~~24WR~~, ~~EST "Integrity"~~ 757-5A-T ~~(15cd), EST "Genesis LED" G1-AVRF~~, System Sensor ~~"SpectrAlert Advance"~~ SRA ~~(red, wall mount)~~, ~~EST~~ "~~Integrity~~" ~~202~~-5A-~~T (red~~, ~~15cd), EST "Integrity" 757~~-~~7A-T (red, 15/75cd)~~, and ~~Edwards 892-2B~~.		The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Siemens ZR-MC-W-B, Wheelock MT-241575W-FR, Edwards 757-5A-T, System Sensor SRA, Kidde "Genesis" EG1R-VM, Edwards 892-2B, Simplex 4903-9219, and System Sensor P4RLA.
	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The current pull stations vary, but these are accurate as of 2/28/2022. The bottom left of the board has a Notifier N-MPS-SA addressable single-action pull station. Right above the N-MPS-SA is a Notifier N-MPS-2A addressable two-stage pull station, mounted on a Simplex backbox. The two-stage switch on this pull station is wired to trip the "disco lights", which are unsynchronized strobes that serve as party lights. This pull station is also equipped with a Notifier MPS-LP dual-action conversion kit. Next to the N-MPS-2A is a Pyr-A-Larm MS-51 bilingual conventional single-action pull station. This pull station is wired into a Notifier FMM-101A addressable module from the mid 2000s. Next to the MS-51 is a Notifier LNG-1R conventional dual-action pull station. This pull station is wired into a Notifier MMX-101A addressable module, which will likely be upgraded to an FMM-101A if the panel is replaced. Below the LNG-1R is a Siemens MS-53C two-stage single-action pull station. Only the pull station is hooked up; the GA switch is not in use. This pull station is wired into a Notifier FMM-1A addressable module, which was chosen in favor of an FMM-101A due to a lack of wire length, and only having 4" backboxes at the time of installation.		The current pull stations vary, but these are accurate as of 2/28/2022. The bottom left of the board has a Notifier N-MPS-SA addressable single-action pull station. Right above the N-MPS-SA is a Notifier N-MPS-2A addressable two-stage pull station, mounted on a Simplex backbox. The two-stage switch on this pull station is wired to trip the "disco lights", which are unsynchronized strobes that serve as party lights. This pull station is also equipped with a Notifier MPS-LP dual-action conversion kit. Next to the N-MPS-2A is a Pyr-A-Larm MS-51 bilingual conventional single-action pull station. This pull station is wired into a Notifier FMM-101A addressable module from the mid 2000s. Next to the MS-51 is a Notifier LNG-1R conventional dual-action pull station. This pull station is wired into a Notifier MMX-101A addressable module, which will likely be upgraded to an FMM-101A if the panel is replaced. Below the LNG-1R is a Siemens MS-53C two-stage single-action pull station. Only the pull station is hooked up; the GA switch is not in use. This pull station is wired into a Notifier FMM-1A addressable module, which was chosen in favor of an FMM-101A due to a lack of wire length, and only having 4" backboxes at the time of installation.
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.		There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.

TwentyThree33: Redid the pull station section. Going to do the other stuff tomorrow.

2022-02-28T18:58:54Z

Redid the pull station section. Going to do the other stuff tomorrow.

Alberta Fire Alarms: /* Notification Appliances */

2021-11-10T22:21:56Z

Notification Appliances

← Older revision		Revision as of 16:21, 10 November 2021
Line 17:		Line 17:
	The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. When in alarm, the system does march time.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. When in alarm, the system does march time.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes: Gentex GEC3-24WR, ~~Edwards~~ 757-5A-T, EST ~~G1AVRF~~, System Sensor SRA, ~~Edwards~~ 202-5A-T, ~~Edwards~~ 757-7A-T, and Edwards 892-2B.		The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Gentex "Commander 3" GEC3-24WR, EST "Integrity" 757-5A-T (15cd), EST "Genesis LED" G1-AVRF, System Sensor "SpectrAlert Advance" SRA (red, wall mount), EST "Integrity" 202-5A-T (red, 15cd), EST "Integrity" 757-7A-T (red, 15/75cd), and Edwards 892-2B.

	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====

Alberta Fire Alarms: /* Automatic Detection Devices */

2021-11-09T22:07:17Z

Automatic Detection Devices

← Older revision		Revision as of 16:07, 9 November 2021
Line 23:		Line 23:
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.		There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.
			Bonus Info: The JCI tech known as Vic said to Yycsfirealarmnimrod that this detector "belonged to the garbage can". Naturally, Yycsfirealarmnimrod put the detector in his backpack before anyone noticed.

	Fun fact: The JCI tech known as Vic said to Yycsfirealarmnimrod that this detector "belonged to the garbage can". Naturally, Yycsfirealarmnimrod put the detector in his backpack before anyone noticed.
	== Videos ==		== Videos ==
	Videos of this system will be uploaded on his channel: https://www.youtube.com/c/ExistentCanadianObject <br>		Videos of this system will be uploaded on his channel: https://www.youtube.com/c/ExistentCanadianObject <br>
	Fire alarm going off for a test: https://www.youtube.com/watch?v=lVfJF4ezMEM		Fire alarm going off for a test: https://www.youtube.com/watch?v=lVfJF4ezMEM

TwentyThree33: Complete system overhaul occurred last week.

2021-11-09T21:09:09Z

Complete system overhaul occurred last week.

← Older revision		Revision as of 15:09, 9 November 2021
Line 15:		Line 15:
	*Note: YYCsFireAlarmNimrod frequently modifies the fire alarm system, hence the "can range from" and "usually consist" parts. He is currently receiving about 30 new parts, which will be used on the system. Although he frequently modifies it, it is always powered up. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.		*Note: YYCsFireAlarmNimrod frequently modifies the fire alarm system, hence the "can range from" and "usually consist" parts. He is currently receiving about 30 new parts, which will be used on the system. Although he frequently modifies it, it is always powered up. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.
	==== FACP ====		==== FACP ====
	~~There are currently two fire alarm panels~~ in this basement~~. The main~~ fire panel ~~is a Simplex 4010. It came from CJ9899, and controls all notification appliances, three pull stations, and some smoke detectors~~. It ~~came from Youtuber CJ9899, and~~ was ~~previously owned by MRIDNETGUY2004, and Zachary Fleck. The 4010 was manufactured~~ in ~~2008. The other panel is the original panel to this basement, a Fire-Lite MS-4. It came from Aden Knowler~~, and was previously ~~owned by~~ [[~~User:Twentytwo22~~]]. It was ~~previously used in~~ the ~~[[Barndominium]]~~. It is ~~set up at a table~~, and is ~~used for testing~~ other ~~devices~~. ~~It is tied into the 4010, and, when~~ in alarm, ~~causes a supervisory on the 4010. The MS-4 has a charger fault, caused by someone reversing~~ the ~~polarity on the batteries. This was not caused by the current owner. The MS-4 was made in December 2015~~.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. When in alarm, the system does march time.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances ~~usually consist of~~ a Simplex 2901-9720 (~~made in 1988)~~ 6 ~~inch motor bell and an EST~~ "~~Integrity" 202-5A-T remote strobe (made in 1997~~) ~~The 2901-9720 came out of [[R.T. Alderman School]]~~, ~~and~~ the ~~strobe came out of a Walmart in Cambridge~~, ~~Ontario. More notification appliances used are an~~ Edwards ~~892-2B (made in 1992) with only the strobe hooked up (the horn failed), EST "Integrity"~~ 757-5A-T ~~horn/strobes (also made in 1997), and recently a Simplex 2901-9722 motor bell~~, ~~and an~~ EST ~~"Genesis LED" G1-AVRF (red~~, ~~wall mount~~, ~~FIRE marking) horn/strobe. The 2901~~-~~9722 also came out of [[R.~~T~~. Alderman School]]. The Genesis LED horn/strobe came from [[User:Twentytwo22]]. Other notification appliances used include a Simplex "TrueAlert" 4906-9102 (red~~, ~~ceiling, SmartSync) remote strobe that came new in box, an EST "Integrity"~~ 757-7A-T ~~(red, 15/75 cd) horn/strobe~~, and ~~two more Simplex 2901~~-~~9720 motor bells. The Integrity devices, the two additional 2901-9720s, and the TrueAlert strobe all came from YouTuber CJ9899~~.		The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes: Gentex GEC3-24WR, Edwards 757-5A-T, EST G1AVRF, System Sensor SRA, Edwards 202-5A-T, Edwards 757-7A-T, and Edwards 892-2B.

	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The pull stations ~~are also changed out sometimes, but they~~ consist of a ~~Simplex 2099~~-~~9201 (4251~~-~~20)~~, a ~~Simplex 2099~~-~~9754~~, ~~an ADT B5009, an FCI MS~~-~~2, but an "EPO & DISCONNECT" variant, which is meant~~ for ~~an emergency stop switch~~, a ~~Fire-Lite BG-12L, and~~ a ~~GE 270-SPO~~. The ~~Simplex 2099-9201 came out of [[R.T. Alderman School]], and the GE 270~~-~~SPO was from [[User:Twentytwo22]]. Other~~ pull stations ~~include two 1990s Edwards 270~~-~~SPO pull stations~~, a ~~rare variant Edwards 270~~-~~SPO pull station, along with a first generation 270~~-~~SPO, an Edwards 275~~-~~C111 pull station, a Mircom MS-401 pull station, seven Mirtone 73303 pull stations, and an Edwards 270-GAO two-stage pull station~~. ~~Other pull stations used are a Mirtone 73201, and a French-~~only ~~2nd generation Edwards 270-SPO~~. ~~He also owns~~ a ~~Simplex 4099-9004 addressable single-action pull station, and two Simplex 4099~~-~~9004CB~~ (~~bilingual, LED light~~) ~~addressable single-action pull stations~~. ~~One 1990s 270-SPO, the 275-C111, 3 of the Mirtone 73303s, the MS-401, and the 4099-9004 all came~~ from ~~Canadian Alarms, and the other 1990s 270-SPO, the 270-GAO, the one remaining 73303, and~~ the ~~4099-9004CBs all came from CJ9899~~.		The pull stations currently consist of a Notifier N-MPS-SA, a Notifier NBG-12LX, two Notifier LNG-1Rs (one wired as supervisory for strobes), and a Mirtone 73201 (wired as a silence switch). The LNG-1R pull stations are wired into Notifier FMM-101A addressable modules, and the 73201 is wired into a Notifier FMM-1A full-size addressable module. These were chosen in favor of the MMX-101 modules he has due to FlashScan capabilities in case the panel is upgraded.
			==== Automatic Detection Devices ====
			There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.

	~~==== Automatic Detection Devices ====~~		Fun fact: The JCI tech known as Vic said to Yycsfirealarmnimrod that this detector "belonged to the garbage can". Naturally, Yycsfirealarmnimrod put the detector in his backpack before anyone noticed.
	The ~~automatic detection devices are a Simplex 2098-9110 2-wire ionization smoke~~ detector~~, an Edwards C2M-PD photoelectric smoke detector, a System Sensor 5601A rate-of-rise/fixed temp heat detector, a System Sensor~~ "i3" C2W-BA photoelectric smoke detector, an Edwards 6249C ionization smoke detector, and an Edwards 281B-PL rate-of-rise/fixed temperature heat detector. The 2098-9110 was used previously, it came out of [[R.T. Alderman School]]. ~~Addressable detectors are a Simplex 4098-9714 photoelectric addressable smoke detector~~, ~~and a Simplex 4098-9734 addressable rate-of-rise heat~~ detector.
	== Videos ==		== Videos ==
	Videos of this system will be uploaded on his channel: https://www.youtube.com/c/ExistentCanadianObject <br>		Videos of this system will be uploaded on his channel: https://www.youtube.com/c/ExistentCanadianObject <br>
	Fire alarm going off for a test: https://www.youtube.com/watch?v=lVfJF4ezMEM		Fire alarm going off for a test: https://www.youtube.com/watch?v=lVfJF4ezMEM

← Older revision		Revision as of 12:58, 28 February 2022
Line 6:		Line 6:
	\|		\|
	\|-		\|-
	\|FACP: ~~Simplex 4010~~<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC		\|FACP: Notifier AFP-200C<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC
	System Type: Addressable (Hybrid Manner)<br />Date of last upgrade: ~~2021~~<br />Year Built: 2003		System Type: Addressable (Hybrid Manner)<br />Date of last upgrade: 2022<br />Year Built: 2003
	\|}		\|}
	'''NOTE:''' ''This page is being heavily edited due to a panel change in this fire alarm system. It is also updated every time he gets a new fire alarm device.		'''NOTE:''' ''This page is being heavily edited due to a panel change in this fire alarm system. It is also updated every time he gets a new fire alarm device.
Line 15:		Line 15:
	*Note: YYCsFireAlarmNimrod frequently modifies the fire alarm system, hence the "can range from" and "usually consist" parts. He is currently receiving about 30 new parts, which will be used on the system. Although he frequently modifies it, it is always powered up. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.		*Note: YYCsFireAlarmNimrod frequently modifies the fire alarm system, hence the "can range from" and "usually consist" parts. He is currently receiving about 30 new parts, which will be used on the system. Although he frequently modifies it, it is always powered up. He can pull the alarm on it any time he wants to without being fined as it is a controlled environment. NEVER pull a fire alarm unless there is actually a fire emergency.
	==== FACP ====		==== FACP ====
	The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. When in alarm, the system does march time.		The current FACP in this basement is a Notifier AFP-200C addressable fire alarm panel. It was made in 2003, and was previously in use at [[40 Sunpark Plaza SE]]. The panel was removed due to NAC troubles, but the culprit was found to have been bent prongs on the horn/strobe terminals. This panel is in immaculate condition, and is fully functional, with no troubles or any other issues. When in alarm, the system does march time.
	==== Notification Appliances ====		==== Notification Appliances ====
	The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Gentex "Commander 3" GEC3-24WR, EST "Integrity" 757-5A-T (15cd), EST "Genesis LED" G1-AVRF, System Sensor "SpectrAlert Advance" SRA (red, wall mount), EST "Integrity" 202-5A-T (red, 15cd), EST "Integrity" 757-7A-T (red, 15/75cd), and Edwards 892-2B.		The notification appliances are currently a Simplex 2901-9720 motor bell (6"), along with the following devices being wired as strobes, with all horn/strobes having the horn disconnected: Gentex "Commander 3" GEC3-24WR, EST "Integrity" 757-5A-T (15cd), EST "Genesis LED" G1-AVRF, System Sensor "SpectrAlert Advance" SRA (red, wall mount), EST "Integrity" 202-5A-T (red, 15cd), EST "Integrity" 757-7A-T (red, 15/75cd), and Edwards 892-2B.

	=== Initiating Devices ===		=== Initiating Devices ===
	==== Pull Stations ====		==== Pull Stations ====
	The pull stations ~~currently consist~~ of a Notifier N-MPS-SA, a Notifier ~~NBG~~-~~12LX~~, two ~~Notifier LNG~~-~~1Rs (one~~ wired as ~~supervisory for strobes), and~~ a ~~Mirtone 73201 (~~wired as a ~~silence switch)~~. ~~The~~ LNG-1R pull ~~stations are~~ wired into Notifier ~~FMM~~-101A addressable ~~modules~~, ~~and~~ the ~~73201~~ is wired into a Notifier FMM-1A ~~full-size~~ addressable module~~. These were~~ chosen in favor of ~~the MMX~~-~~101 modules he has~~ due to ~~FlashScan capabilities in case~~ the ~~panel is upgraded~~.		The current pull stations vary, but these are accurate as of 2/28/2022. The bottom left of the board has a Notifier N-MPS-SA addressable single-action pull station. Right above the N-MPS-SA is a Notifier N-MPS-2A addressable two-stage pull station, mounted on a Simplex backbox. The two-stage switch on this pull station is wired to trip the "disco lights", which are unsynchronized strobes that serve as party lights. This pull station is also equipped with a Notifier MPS-LP dual-action conversion kit. Next to the N-MPS-2A is a Pyr-A-Larm MS-51 bilingual conventional single-action pull station. This pull station is wired into a Notifier FMM-101A addressable module from the mid 2000s. Next to the MS-51 is a Notifier LNG-1R conventional dual-action pull station. This pull station is wired into a Notifier MMX-101A addressable module, which will likely be upgraded to an FMM-101A if the panel is replaced. Below the LNG-1R is a Siemens MS-53C two-stage single-action pull station. Only the pull station is hooked up; the GA switch is not in use. This pull station is wired into a Notifier FMM-1A addressable module, which was chosen in favor of an FMM-101A due to a lack of wire length, and only having 4" backboxes at the time of installation.
	==== Automatic Detection Devices ====		==== Automatic Detection Devices ====
	There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.		There is currently only one detector on this system. It is a Notifier FSL-751A VIEW (Very Intelligent Early Warning) laser smoke detector. It was removed from the Enmax headquarters in Calgary.
	Bonus Info: The JCI tech known as Vic said to Yycsfirealarmnimrod that this detector "belonged to the garbage can". Naturally, Yycsfirealarmnimrod put the detector in his backpack before anyone noticed.		Bonus Info: The JCI tech known as Vic said to Yycsfirealarmnimrod that this detector "belonged to the garbage can". Naturally, Yycsfirealarmnimrod put the detector in his backpack before anyone noticed.

	== Videos ==		== Videos ==
	Videos of this system will be uploaded on his channel: https://www.youtube.com/c/ExistentCanadianObject <br>		Videos of this system will be uploaded on his channel: https://www.youtube.com/c/ExistentCanadianObject <br>
	Fire alarm going off for a test: https://www.youtube.com/watch?v=lVfJF4ezMEM		Fire alarm going off for a test: https://www.youtube.com/watch?v=lVfJF4ezMEM