Editing Staybridge Suites Oakville Burlington (section)

==System Specifications==
====FACP====
The hotel is protected by a Mircom FX-2000 addressable fire alarm system.  The panel is located in the main sprinkler room, located on the northeast side of the building.  The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal..

=====Annunciators=====
There is a Mircom RAM-1032TZDS annunciator paired with a Mircom RAX-1048TZDS annunciator at the front entrance.  Both modules are mounted in a Mircom BB-1002 enclosure.

====Notification Appliances====
All common areas of the hotel have Mircom “Select-A-Horn/Strobe” FHS-240W horn/strobes (white, wall-mount).  <br>The guest rooms have Mircom MH-25W mini-horns (white, wall-mount), with FIRE stickers on them.

===Initiating Devices===
====Pull Stations====
All pull stations are Mircom MS-701AD addressable single-action pull stations.

====Automatic Detection Devices====
There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout all common areas, mounted on System Sensor B210LPA bases.

====Modules====
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.  <br>There are Mircom MIX-M500RA addressable relay modules serving various purposes.  <br>There are System Sensor M500XA isolator modules on the SLC.

====EOLs====
There are Mircom MP-300 end of line resistor plates on all sprinkler and Class-B signal circuits.

[[Category:Ontario]]
[[Category:Hotels]]