Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

6302 29 Ave, Beaumont: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
Line 11: Line 11:
====FACP====
====FACP====
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the Seeds & Sprouts entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the Seeds & Sprouts entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
.
====Notification Appliances====
====Notification Appliances====
All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).

Latest revision as of 10:01, 7 September 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Seeds & Sprouts Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2013

6302 29 Avenue is the address of a small plaza in Beaumont, Alberta, Canada. The plaza consists of Seeds & Sprouts Early Learning Centre, Canadian Pizza Unlimited, and Big Guy’s Fried Chicken. The plaza was built in 2013, and the fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the Seeds & Sprouts entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout Seeds and Sprouts, mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.