More actions
mNo edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Notifier NFS-320C <br />FACP Location: Basement Electrical Room <br />System Type: Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (alert) <br> Temporal (alarm) <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2015 <br />Year Opened: Early 1970s | | FACP: Notifier NFS-320C <br />FACP Location: Basement Electrical Room <br />System Type: Two-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: 20BPM (alert) <br> Temporal (alarm) <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2015 <br />Year Opened: Early 1970s | ||
|} | |} | ||
'''AgeCare Glenmore''' is a retirement home located at 1729 90 Ave SW, Calgary, Alberta. The building opened in the early 1970s as the Beverly Care Centre, expanded in 1984 and in the early 1990s. The fire alarm system was upgraded in the early 1990s, with a minor upgrade in 2015. | |||
'''AgeCare Glenmore''' is a retirement home located at 1729 90 Ave SW, Calgary, Alberta. | |||
==System Specifications== | ==System Specifications== | ||
====FACP==== | ====FACP==== | ||
The building is protected by a Notifier NFS-320C conventional fire alarm system. | The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel is located in the basement electrical room. The panel has several Notifier XP6-MA zone cards to accommodate the conventional devices. The system configured for two-stage operation. The alert signal is 20BPM, followed by Temporal as the alarm signal. | ||
=====Annunciators===== | =====Annunciators===== | ||
There is a Notifier LCD2-80 annunciator in the main entrance vestibule. | There is a Notifier LCD2-80 annunciator in the main entrance vestibule. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong), mounted behind grilles to amplify the sound. | Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong), mounted behind grilles to amplify the sound. <br> There is one Simplex 2901-9723 motor bell (6” gong) as a deficiency replacement. <br> Each bell has an Edwards 802-2B remote strobe (red, wall-mount) mounted next to it. | ||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
All pull stations are Edwards 270-GAO conventional dual-stage single-action pull stations. | All pull stations are Edwards 270-GAO conventional dual-stage single-action pull stations. | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors throughout the building. | There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors throughout the building. | ||
[[Category:Calgary]] | |||
[[Category:Healthcare]] | |||
Latest revision as of 11:17, 8 September 2024
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: Basement Electrical Room System Type: Two-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: 20BPM (alert) Temporal (alarm) Strobes Synchronized: No Date of last known Upgrade: 2015 Year Opened: Early 1970s |
AgeCare Glenmore is a retirement home located at 1729 90 Ave SW, Calgary, Alberta. The building opened in the early 1970s as the Beverly Care Centre, expanded in 1984 and in the early 1990s. The fire alarm system was upgraded in the early 1990s, with a minor upgrade in 2015.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel is located in the basement electrical room. The panel has several Notifier XP6-MA zone cards to accommodate the conventional devices. The system configured for two-stage operation. The alert signal is 20BPM, followed by Temporal as the alarm signal.
Annunciators[edit | edit source]
There is a Notifier LCD2-80 annunciator in the main entrance vestibule.
Notification Appliances[edit | edit source]
Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong), mounted behind grilles to amplify the sound.
There is one Simplex 2901-9723 motor bell (6” gong) as a deficiency replacement.
Each bell has an Edwards 802-2B remote strobe (red, wall-mount) mounted next to it.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Edwards 270-GAO conventional dual-stage single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are System Sensor C2W-BA conventional 2-wire photoelectric smoke detectors throughout the building.