Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Banff Woods Lodge: Difference between revisions

From FireAlarmPedia
(MUCH-needed overhaul. I HATE THIS SYSTEM SO MUCH)
No edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 6: Line 6:
|-
|-
| FACP: Edwards EST2
| FACP: Edwards EST2
FACP Location: Main Building Lobby<br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC  
FACP Location: Main Building Lobby<br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br>System Coding: Temporal <br>Strobes Synchronized: Yes, EST<br />Date of last known Upgrade: 2015 <br />Year Opened: 2003
 
System Coding: Temporal
 
Strobes Synchronized: Yes, EST<br />Date of last known Upgrade: 2015 <br />Year Opened: 2003
|}
|}
'''Banff Woods Lodge''' is a 2-story hotel located at 1200 Harvie Heights Rd, Harvie Heights, AB, near Canmore. It opened in 2003 as the Inn of the Rockies, and became Banff Woods Lodge in 2021. The hotel consists of five buildings set up like a townhouse. Each unit has two floors, and all buildings are monitored by the same fire alarm system. The system is original.  
'''Banff Woods Lodge''' is a 2-story hotel located at 1200 Harvie Heights Rd, Harvie Heights, AB, near Canmore. It opened in 2003 as the Inn of the Rockies, and became Banff Woods Lodge in 2021. The hotel consists of five buildings set up like a townhouse. Each unit has two floors, and all buildings are monitored by the same fire alarm system. The system is original.  
== System Specifications (2003-present) ==
==System Specifications (2003-present)==
==== FACP ====
====FACP====
The buildings are protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main building's lobby near the desk. The system monitors every building as a network. The system runs EST's Signature addressable protocol, and the system coding is temporal.  
The buildings are protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main building's lobby near the desk. The system monitors every building as a network. The system runs EST's Signature addressable protocol, and the system coding is temporal.  
==== Notification Appliances ====
====Notification Appliances====
All notification appliances are from EST's "Genesis" line of products.
All notification appliances are from EST's "Genesis" line of products.
=====Main Building (Pool Area, Gym, Lobby)=====
All notification appliances but one are EST G1R-HV15 horn/strobes (red, wall-mount, no lettering, 15cd, first gen).


===== Main Building (Pool Area, Gym, Lobby) =====
There is an EST G1R-HDVM horn/strobe (red, wall-mount, no lettering, set to 15cd) above the panel as a deficiency replacement for an EST 692-5A-HSR mini-horn/strobe (red, 15cd).
All notification appliances but one are EST G1R-HV15 horn/strobes (red, wall-mount, no lettering, 15cd, first gen). There is an EST G1R-HDVM horn/strobe (red, wall-mount, no lettering, set to 15cd) above the panel as a deficiency replacement for an EST 692-5A-HSR mini-horn/strobe (red, 15cd).
===== Units=====
All units have an EST G1-HV15 horn/strobe (white, wall-mount, no lettering, 15cd, first gen) in the living area.
===Initiating Devices===
====Pull Stations====
All pull stations are EST SIGA-270 addressable single-action pull stations. These are only in the main building.
====Automatic Detection Devices====
The main building has EST SIGA-PS addressable photoelectric smoke detectors.  


===== Units =====
The units have EST SIGA-HRS addressable rate-of-rise/fixed heat detectors, at the top of each stairwell.
All units have an EST G1-HV15 horn/strobe (white, wall-mount, no lettering, 15cd, first gen) in the living area.
 
All detectors are mounted on SIGA-SB bases.


=== Initiating Devices ===
==== EOLs ====
==== Pull Stations ====
There are Edwards EOL-P1 end of line resistor plates on all signal circuits.
All pull stations are EST SIGA-270 addressable single-action pull stations. These are only in the main building.
[[Category:Alberta]]
==== Automatic Detection Devices ====
[[Category:Hotels]]
The main building has EST SIGA-PS addressable photoelectric smoke detectors. The units have EST SIGA-HRS addressable rate-of-rise/fixed heat detectors, at the top of each stairwell. All detectors are mounted on SIGA-SB bases. There is no sprinkler system in this building.

Latest revision as of 11:44, 8 September 2024

System Specifications
FACP: Edwards EST2

FACP Location: Main Building Lobby
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2015
Year Opened: 2003

Banff Woods Lodge is a 2-story hotel located at 1200 Harvie Heights Rd, Harvie Heights, AB, near Canmore. It opened in 2003 as the Inn of the Rockies, and became Banff Woods Lodge in 2021. The hotel consists of five buildings set up like a townhouse. Each unit has two floors, and all buildings are monitored by the same fire alarm system. The system is original.

System Specifications (2003-present)[edit | edit source]

FACP[edit | edit source]

The buildings are protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main building's lobby near the desk. The system monitors every building as a network. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are from EST's "Genesis" line of products.

Main Building (Pool Area, Gym, Lobby)[edit | edit source]

All notification appliances but one are EST G1R-HV15 horn/strobes (red, wall-mount, no lettering, 15cd, first gen).

There is an EST G1R-HDVM horn/strobe (red, wall-mount, no lettering, set to 15cd) above the panel as a deficiency replacement for an EST 692-5A-HSR mini-horn/strobe (red, 15cd).

Units[edit | edit source]

All units have an EST G1-HV15 horn/strobe (white, wall-mount, no lettering, 15cd, first gen) in the living area.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations. These are only in the main building.

Automatic Detection Devices[edit | edit source]

The main building has EST SIGA-PS addressable photoelectric smoke detectors.

The units have EST SIGA-HRS addressable rate-of-rise/fixed heat detectors, at the top of each stairwell.

All detectors are mounted on SIGA-SB bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.