Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Co-op (Shawnessy): Difference between revisions

From FireAlarmPedia
(QuickStart!!!)
 
(5 intermediate revisions by 3 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: EST QuickStart QS1 <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />Date of last known Upgrade: 2016 <br />Year Opened: 1991
| FACP: EST QuickStart QS1 <br>FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br>System Coding: Temporal <br>Strobes Synchronized: Yes, Self-Sync<br />Date of last known Upgrade: 2016 <br />Year Opened: 1991
|}
|}
Calgary Co-op is a chain of grocery stores in the Calgary area. This particular store was built in 1991, and renovated in about 2016. The current fire alarm system is from 2016, and the previous system was from around 2006. For some unknown reason, they are basically the same. No details are known about the original system.
Calgary Co-op is a chain of grocery stores in the Calgary area. This particular store is located at #100 250 Shawville Blvd SE, Calgary, AB. It was built in 1991, and renovated in about 2016. The current fire alarm system is from 2016, and the previous system was from around 2006.  
==System Specifications==
==System Specifications (2016-present)==
Despite the previous system being almost exactly the same, every device was replaced with a newer variant.
====FACP====
====FACP====
The current fire alarm panel is an EST QuickStart QS1 from 2016. It replaced a 2006 variant following a renovation. It is unknown why they replaced the panel with another identical panel in the same spot, as they could've saved money by just wiring the new devices into the original panel. The system does code-3 in alarm, as this is the only coding that the notification appliances can do without significant modifications.
The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs EST's Signature addressable protocol, and the system coding is temporal.
=====Booster Panels=====
There is an Edwards BPS6A booster power supply next to the main FACP.
====Notification Appliances====
====Notification Appliances====
The notification appliances are all from EST's "Genesis" line of products. They mostly consist of EST G1R-HDVM (red, wall, no FIRE) horn/strobes, and some EST GC-HDVM (white, ceiling, no FIRE) ceiling-mount horn/strobes. These were also installed in 2016, replacing older variants.
The notification appliances are all from EST's "Genesis" line of products.  


Most notification appliances are EST G1R-HDVM horn/strobes (red, wall-mount, set to 15cd, no marking).
There are also some EST GC-HDVM horn/strobes (white, ceiling mount, no marking, set to 30cd).
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
The pull stations consist of EST SIGA-270 addressable pull stations, installed in 2016 with the current EST logo. They replaced older variants.
All pull stations are EST SIGA-270 addressable single-action pull stations.
====Automatic Detection Devices====
====Automatic Detection Devices====
All smoke detectors consist of EST SIGA-PS addressable photoelectric smoke detectors.
There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases.
==Former System Specifications==
==== Modules ====
There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
====EOLs====
There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.
==Former System Specifications (2006-present)==
{| style="float:right;border:2px solid black"
{| style="float:right;border:2px solid black"
|-
|-
Line 26: Line 36:
|  
|  
|-
|-
| FACP: EST QuickStart QS1 <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />Date of last known Upgrade: N/A <br />Year Decommissioned: 2016
| FACP: EST QuickStart QS1 <br>FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br>System Coding: Temporal <br>Strobes Synchronized: Yes, Self-Sync<br />Date of last known Upgrade: N/A <br />Year Decommissioned: 2016
|}
|}
====FACP====
====FACP====
The previous fire alarm panel was also an EST QuickStart QS1, but from 2006. It is unknown why this panel was replaced in 2016, but possibly a CPU fault during reprogramming.
The building was protected by an EST QuickStart QS1 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran EST's Signature addressable protocol, and the system coding was temporal.
====Notification Appliances====
====Notification Appliances====
All previous notification appliances consisted of EST "Genesis" G1R-HDVM (red, wall, no FIRE) horn/strobes. All horn/strobes have been replaced.
All previous notification appliances were EST "Genesis" G1R-HDVM (red, wall-mount, no marking, set to 15cd) horn/strobes.  
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
The previous pull stations consisted of EST SIGA-270 addressable pull stations from 2006. These were replaced in 2016 with newer variants.
All pull stations were EST SIGA-270 addressable single action pull stations.  
====Automatic Detection Devices====
====Automatic Detection Devices====
None noticed.
None noticed.
==== Modules ====
There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
====EOLs====
There were Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.
[[Category:Calgary]]
[[Category:Retail Stores]]

Latest revision as of 17:51, 10 September 2024

System Specifications
FACP: EST QuickStart QS1
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Self-Sync
Date of last known Upgrade: 2016
Year Opened: 1991

Calgary Co-op is a chain of grocery stores in the Calgary area. This particular store is located at #100 250 Shawville Blvd SE, Calgary, AB. It was built in 1991, and renovated in about 2016. The current fire alarm system is from 2016, and the previous system was from around 2006.

System Specifications (2016-present)[edit | edit source]

Despite the previous system being almost exactly the same, every device was replaced with a newer variant.

FACP[edit | edit source]

The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Booster Panels[edit | edit source]

There is an Edwards BPS6A booster power supply next to the main FACP.

Notification Appliances[edit | edit source]

The notification appliances are all from EST's "Genesis" line of products.

Most notification appliances are EST G1R-HDVM horn/strobes (red, wall-mount, set to 15cd, no marking).

There are also some EST GC-HDVM horn/strobes (white, ceiling mount, no marking, set to 30cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors in some areas, mounted on SIGA-SB bases.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.

Former System Specifications (2006-present)[edit | edit source]

System Specifications
FACP: EST QuickStart QS1
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Self-Sync
Date of last known Upgrade: N/A
Year Decommissioned: 2016

FACP[edit | edit source]

The building was protected by an EST QuickStart QS1 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran EST's Signature addressable protocol, and the system coding was temporal.

Notification Appliances[edit | edit source]

All previous notification appliances were EST "Genesis" G1R-HDVM (red, wall-mount, no marking, set to 15cd) horn/strobes.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were EST SIGA-270 addressable single action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There were Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.