Canmore Inn & Suites: Difference between revisions

Latest revision as of 19:55, 19 September 2024

System Specifications

FACP: Notifier NFS2-640C FACP Location: Lobby System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Wheelock Only Date of last known Upgrade: 2021 Year Opened: 1996

Canmore Inn & Suites is a 3-star hotel located at 1402 Bow Valley Trail, in Canmore, Alberta, Canada. It was built in 1996 as Ramada, and became Canmore Inn & Suites in 2017. A partial fire alarm upgrade involving replacement of some notification appliances and the main FACP occurred in 2021.

System Specifications (2021 present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the lobby, and is equipped with the NCA-2 display. The system coding is temporal.

Notification Appliances[edit | edit source]

All common area notification appliances are System Sensor "L-Series" HRLA remote horns (red, wall-mount) mounted on Wheelock RSSP-24MCW strobe plates (red, set to 15cd).

All guest rooms have EST 692-3A-103 mini-horn/strobes (white, wall-mount, 30cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional pull stations.

Automatic Detection Devices[edit | edit source]

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all initiating and signal circuits.

Former System Specifications (1996-2021)[edit | edit source]

System Specifications

FACP: Simplex 4100U
FACP Location: Lobby
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Continuous?

Strobes Synchronized: No
Date of last known Upgrade: 2000s
Year Decomissioned: 2021

FACP[edit | edit source]

The building was protected by a Simplex 4100U conventional fire alarm system. The panel was located in the lobby, and had a 3 bay cabinet; it replaced the original EST ESA2000 around 2005. The system coding was likely continuous.

Notification Appliances[edit | edit source]

All common area notification appliances were Edwards 439D-6AWC vibrating bells (6" gong) mounted on EST "Integrity" 403-5A-R strobe plates (red, 15cd).

The workout room had the aforementioned bell installed remotely.

The pool area had an Edwards 439D-10AWC vibrating bell (10" gong) mounted on an EST 403-5A-R strobe plate, due to higher ambient noise levels.

The guest rooms had EST 692-3A-103 mini-horn/strobes (white, 30cd), these are still in service.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were Edwards 270-SPO conventional pull stations.

Automatic Detection Devices[edit | edit source]

There were System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.

EOLs[edit | edit source]

There were Edwards EOL-P1 end of line resistor plates on all initiating and signal circuits.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: Simplex 4100U <br />System Type: Addressable (Hybrid Manner) <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC<br />Date of last known Upgrade: Mid-late 2000s <br />Year Opened: 1996
+| FACP: Notifier NFS2-640C<br /> FACP Location: Lobby <br /> System Type: Single-Stage Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br>System Coding: Temporal <br>Strobes Synchronized: Wheelock Only<br />Date of last known Upgrade: 2021<br />Year Opened: 1996
 |}
+'''Canmore Inn & Suites''' is a 3-star hotel located at 1402 Bow Valley Trail, in Canmore, Alberta, Canada. It was built in 1996 as Ramada, and became Canmore Inn & Suites in 2017. A partial fire alarm upgrade involving replacement of some notification appliances and the main FACP occurred in 2021.
+==System Specifications (2021 present)==
+====FACP====
+The building is protected by a Notifier NFS2-640C conventional fire alarm system. The panel is located in the lobby, and is equipped with the NCA-2 display. The system coding is temporal.
+====Notification Appliances====
+All common area notification appliances are System Sensor "L-Series" HRLA remote horns (red, wall-mount) mounted on Wheelock RSSP-24MCW strobe plates (red, set to 15cd).
-'''Canmore Inn & Suites''' is a 3-star hotel in Canmore, AB. It has just 3 floors, but is a very long hotel with long hallways. It was built in 1996, and everything except for the fire alarm panel seems to be original. This hotel was previously known as Ramada until around 2016-17.
+All guest rooms have EST 692-3A-103 mini-horn/strobes (white, wall-mount, 30cd).
+===Initiating Devices===
+====Pull Stations====
+All pull stations are Edwards 270-SPO conventional pull stations.
+====Automatic Detection Devices====
+There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.
+====EOLs====
+There are Edwards EOL-P1 end of line resistor plates on all initiating and signal circuits.
+==Former System Specifications (1996-2021)==
+{| style="float:right;border:2px solid black"
+|-
+!System Specifications
+|-
+|
+|-
+|FACP: Simplex 4100U <br /> FACP Location: Lobby <br /> System Type: Single-Stage Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC
+System Coding: Continuous?
-== System Specifications ==
+Strobes Synchronized: No <br />Date of last known Upgrade: 2000s <br />Year Decomissioned: 2021
+|}
-==== FACP ====
+====FACP====
+The building was protected by a Simplex 4100U conventional fire alarm system. The panel was located in the lobby, and had a 3 bay cabinet; it replaced the original EST ESA2000 around 2005. The system coding was likely continuous.
-The fire alarm control panel is a Simplex 4100U, installed somewhere around 2005-2010, most likely replacing an EST ESA2000 or 6632 from 1996. Despite the 4100U being addressable, it is set up in a non-addressable manner. The panel is located behind the front desk.
+====Notification Appliances====
+All common area notification appliances were Edwards 439D-6AWC vibrating bells (6" gong) mounted on EST "Integrity" 403-5A-R strobe plates (red, 15cd).
-==== Notification Appliances ====
-The notification appliances seen throughout the hotel's lobby and hallways are Edwards 439D-6AWC vibrating bells on EST "Integrity" 403-5A-R strobe plates. The pool area has an Edwards 439D-10AWC vibrating bell on an EST 403-5A-R strobe plate, due to louder ambient noise levels. The rooms have EST 692-5A-103 mini-horn/strobes. The workout room has an upside down Edwards 439D-6AWC vibrating bell with no strobe plate. All of the notification appliances were left over from the EST system.
-=== Initiating Devices ===
-==== Pull Stations ====
-All of the pull stations are Edwards 270-SPO from 1996, left over from the EST system.
+The workout room had the aforementioned bell installed remotely.
-==== Automatic Detection Devices ====
+The pool area had an Edwards 439D-10AWC vibrating bell (10" gong) mounted on an EST 403-5A-R strobe plate, due to higher ambient noise levels.
-The smoke detectors are all System Sensor C2W-BA photoelectric i3 smoke detectors. There were most likely Edwards 6264B smoke detectors before the Simplex system.
+The guest rooms had EST 692-3A-103 mini-horn/strobes (white, 30cd), these are still in service.
-[[]
+===Initiating Devices===
-[[]
+====Pull Stations====
+All pull stations were Edwards 270-SPO conventional pull stations.
+====Automatic Detection Devices====
+There were System Sensor C2W-BA conventional photoelectric smoke detectors throughout all common areas.
+====EOLs====
+There were Edwards EOL-P1 end of line resistor plates on all initiating and signal circuits.
+[[Category:Alberta]]
+[[Category:Hotels]]