Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Centre 15: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br /> FACP Location: Elevator Lobby, Main Floor <br />System Type: Hybrid <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br />Date of last known Upgrade: 2010s <br />Year Opened: 1982
| FACP: Mircom FX-2000 <br /> FACP Location: Elevator Lobby, Main Floor <br />System Type: Single-Stage Hybrid-Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br />Date of last known Upgrade: 2010s <br />Year Opened: 1982
|}
|}
 
'''Centre 15''' is a midrise office building located at 1509 Centre Street South, in Calgary, Alberta, Canada. The building opened in 1982, and the fire alarm system is partially original.
'''Centre 15''' is a midrise office building located at 1509 Centre Street South, in Calgary, Alberta, Canada. The building opened in 1982, and the fire alarm system is partially original. The fire alarm system is serviced by Viking Fire Protection.
 
==System Specifications (2000s-present)==
==System Specifications (2000s-present)==
====FACP====
====FACP====
The building is protected by a Mircom FX-2000 hybrid-addressable fire alarm system. The panel is located in the ground floor elevator lobby. The system is fully conventional except for the smoke detectors. The addressable portion of the system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. This panel was installed in the 2000s replacing a Pyrotronics System 3.
The building is protected by a Mircom FX-2000 hybrid-addressable fire alarm system. The panel is located in the ground floor elevator lobby. The system is fully conventional except for the smoke detectors. The addressable portion of the system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. This panel was installed in the 2000s replacing a Pyrotronics System 3.
 
====Notification Appliances====
====Notification Appliances====
All areas except the main lobby have Faraday 3560 vibrating bells (10” gong). The main lobby has Simplex 2901-9723 motor bells (6” gong), installed in the 2010s.
All areas except the main lobby have Faraday 3560 vibrating bells (10” gong). The main lobby has Simplex 2901-9723 motor bells (6” gong), installed in the 2010s.
 
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
All pull stations except one are Pyr-A-Larm MS-51 conventional single-action pull stations. There is one Notifier NFM-950B conventional single-action pull station on the second floor, installed in the late 1980s as a deficiency replacement.
All pull stations except one are Pyr-A-Larm MS-51 conventional single-action pull stations. There is one Notifier NFM-950B conventional single-action pull station on the second floor, installed in the late 1980s as a deficiency replacement.
 
====Automatic Detection Devices====
====Automatic Detection Devices====
There are Mircom MIX-2251B addressable photoelectric smoke detectors in the elevator shafts mounted on System Sensor B210LPA low-profile bases. These were installed for elevator recall.
There are Mircom MIX-2251B addressable photoelectric smoke detectors in the elevator shafts mounted on System Sensor B210LPA low-profile bases. These were installed for elevator recall.
 
==Bonus Information==
==Bonus Information==
Some bells are mounted upside-down. This is not a code violation, as the bells still output the required sound levels.
Some bells are mounted upside-down. This is not a code violation, as the bells still output the required sound levels.
[[]
[[]
[[Category:Calgary]]
[[Category:Commercial]]

Latest revision as of 16:25, 23 September 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Elevator Lobby, Main Floor
System Type: Single-Stage Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Date of last known Upgrade: 2010s
Year Opened: 1982

Centre 15 is a midrise office building located at 1509 Centre Street South, in Calgary, Alberta, Canada. The building opened in 1982, and the fire alarm system is partially original.

System Specifications (2000s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 hybrid-addressable fire alarm system. The panel is located in the ground floor elevator lobby. The system is fully conventional except for the smoke detectors. The addressable portion of the system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. This panel was installed in the 2000s replacing a Pyrotronics System 3.

Notification Appliances[edit | edit source]

All areas except the main lobby have Faraday 3560 vibrating bells (10” gong). The main lobby has Simplex 2901-9723 motor bells (6” gong), installed in the 2010s.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations except one are Pyr-A-Larm MS-51 conventional single-action pull stations. There is one Notifier NFM-950B conventional single-action pull station on the second floor, installed in the late 1980s as a deficiency replacement.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251B addressable photoelectric smoke detectors in the elevator shafts mounted on System Sensor B210LPA low-profile bases. These were installed for elevator recall.

Bonus Information[edit | edit source]

Some bells are mounted upside-down. This is not a code violation, as the bells still output the required sound levels. [[]