Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Centre Eleven: Difference between revisions

From FireAlarmPedia
mNo edit summary
No edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979
| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979
|}
|}
'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.
'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.
==System Specifications (1979-present)==
==System Specifications (1979-present)==
====FACP====
====FACP====
The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. The panel replaced a Mircom FA-1000.
The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.  
 
The panel replaced a Mircom FA-1000 in 2023.
=====Annunciators=====
=====Annunciators=====
There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.
There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.
Line 16: Line 18:
There is an Edwards BPS10A booster power supply in a closet on the first floor.
There is an Edwards BPS10A booster power supply in a closet on the first floor.
====Notification Appliances====
====Notification Appliances====
The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. The parkade has Wheelock MB-G6-24 motor bells (6" gong), and the first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong).  
 
The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement.  
 
There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit.  
 
The parkade has Wheelock MB-G6-24 motor bells (6" gong).
 
The first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
All pull stations but one are Edwards 270-SPO conventional single-action pull stations. There is an Edwards 274-111 conventional single-action pull station in a first floor unit.
All pull stations but one are Edwards 270-SPO conventional single-action pull stations.  
 
There is an Edwards 274-111 conventional single-action pull station in a first floor unit.
====Automatic Detection Devices====
====Automatic Detection Devices====
There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices CR135 conventional 135­°F fixed/rate-of-rise heat detectors.
There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas.  
[[]
 
Most areas have Fire Detection Devices CR-135 conventional 135­°F fixed/rate-of-rise heat detectors.
 
==== EOLs ====
There are Edwards EOL-P1 end of line resistor plates on all circuits.
[[Category:Calgary]]
[[Category:Commercial]]

Latest revision as of 16:26, 23 September 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2023
Year Opened: 1979

Centre Eleven is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.

System Specifications (1979-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.

The panel replaced a Mircom FA-1000 in 2023.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.

Booster Panels[edit | edit source]

There is an Edwards BPS10A booster power supply in a closet on the first floor.

Notification Appliances[edit | edit source]

The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong).

The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement.

There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit.

The parkade has Wheelock MB-G6-24 motor bells (6" gong).

The first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations but one are Edwards 270-SPO conventional single-action pull stations.

There is an Edwards 274-111 conventional single-action pull station in a first floor unit.

Automatic Detection Devices[edit | edit source]

There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas.

Most areas have Fire Detection Devices CR-135 conventional 135­°F fixed/rate-of-rise heat detectors.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all circuits.