Fairview Community Centre: Difference between revisions

Latest revision as of 19:46, 26 September 2024

System Specifications

FACP: EST QuickStart QSC FACP Location: Main Lobby Vestibule System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Genesis Date of last known Upgrade: 2023 Year Opened: 1972, 1976

Fairview Community Centre is a community centre located at 8038 Fairmount Dr SE, Calgary, Alberta. It was originally built in 1972 as the Fairview Arena, and was expanded in 1976 to add the community centre. The building was then renovated in 2007, and the arena was demolished in 2023 when the roof collapsed. The fire alarm system was upgraded in 2007, with NA upgrades in 2023.

System Specifications (2007-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST QuickStart QSC conventional fire alarm system. The panel is located in the main lobby vestibule. The system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Edwards “Genesis” G1AVRF horn/strobes (red, wall-mount, FIRE marking, set to 15cd). These were installed in 2023, replacing Edwards 439D-10AWC vibrating bells (10” gong) mounted on EST “Integrity” 403-5A-R strobe plates (15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Edwards 270-SPOB conventional bilingual single-action pull stations.
There are some Edwards 275-C111 conventional single-action pull stations, leftover from the previous system.
There is one Mircom MS-401 conventional single-action pull station as a deficiency replacement.

Automatic Detection Devices[edit | edit source]

There are Edwards EC30U-3 conventional photoelectric smoke detectors throughout the second floor.
The arena lobby and some other areas have Edwards C2M-PD conventional photoelectric smoke detectors.
Mechanical areas have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors.
Some mechanical rooms have Edwards 284B-PL conventional 194°F fixed-temperature heat detectors.
There is a Potter CF-200W conventional 200°F fixed-temperature heat detector in the kiln room.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all circuits.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: EST QuickStart QSC <br />FACP Location: Main Lobby Vestibule <br />System Type: Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2023 <br />Year Opened: 1972, 1976
+| FACP: EST QuickStart QSC <br />FACP Location: Main Lobby Vestibule <br />System Type: Single-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Genesis <br />Date of last known Upgrade: 2023 <br />Year Opened: 1972, 1976
 |}
 '''Fairview Community Centre''' is a community centre located at 8038 Fairmount Dr SE, Calgary, Alberta. It was originally built in 1972 as the Fairview Arena, and was expanded in 1976 to add the community centre. The building was then renovated in 2007, and the arena was demolished in 2023 when the roof collapsed. The fire alarm system was upgraded in 2007, with NA upgrades in 2023.
 == System Specifications (2007-present) ==
 ==== FACP ====
 The building is protected by an EST QuickStart QSC conventional fire alarm system. The panel is located in the main lobby vestibule. The system coding is temporal.
 ==== Notification Appliances ====
 All notification appliances are Edwards “Genesis” G1AVRF horn/strobes (red, wall-mount, FIRE marking, set to 15cd). These were installed in 2023, replacing Edwards 439D-10AWC vibrating bells (10” gong) mounted on EST “Integrity” 403-5A-R strobe plates (15cd).
 === Initiating Devices ===
 ==== Pull Stations ====
 Most pull stations are Edwards 270-SPOB conventional bilingual single-action pull stations. <br> There are some Edwards 275-C111 conventional single-action pull stations, leftover from the previous system. <br> There is one Mircom MS-401 conventional single-action pull station as a deficiency replacement.
 ==== Automatic Detection Devices ====
+There are Edwards EC30U-3 conventional photoelectric smoke detectors throughout the second floor. <br>The arena lobby and some other areas have Edwards C2M-PD conventional photoelectric smoke detectors. <br>Mechanical areas have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors. <br>Some mechanical rooms have Edwards 284B-PL conventional 194°F fixed-temperature heat detectors. <br>There is a Potter CF-200W conventional 200°F fixed-temperature heat detector in the kiln room.
-There are Edwards EC30U-3 conventional photoelectric smoke detectors throughout the second floor. <br> The arena lobby and some other areas have Edwards C2M-PD conventional photoelectric smoke detectors. <br> Mechanical areas have System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detectors. <br> Some mechanical rooms have Edwards 284B-PL conventional 194°F fixed-temperature heat detectors. <br> There is a Potter CF-200W conventional 200°F fixed-temperature heat detector in the kiln room.
+==== EOLs ====
+There are Edwards EOL-P1 end of line resistor plates on all circuits.
 [[Category:Calgary]]
 [[Category:Community Centres]]