More actions
(System Sensor i3!!!) |
mNo edit summary |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Notifier System 2500 <br /> FACP Location: Main Lobby <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2020s <br />Year Opened: 1910, 2000 | | FACP: Notifier System 2500 <br /> FACP Location: Main Lobby <br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2020s <br />Year Opened: 1910, 2000 | ||
|} | |} | ||
'''Louise Block''' is a historic office building located at 1018 Macleod Trail Southeast, in Calgary, Alberta, Canada. The building opened in 1910 as a mixed commercial/residential building, and was redeveloped in 2000 as an office building, with retail spaces on the main floor. The fire alarm system was upgraded in 2000. | '''Louise Block''' is a historic office building located at 1018 Macleod Trail Southeast, in Calgary, Alberta, Canada. The building opened in 1910 as a mixed commercial/residential building, and was redeveloped in 2000 as an office building, with retail spaces on the main floor. The fire alarm system was upgraded in 2000. | ||
==System Specifications (2000s-present)== | ==System Specifications (2000s-present)== | ||
====FACP==== | ====FACP==== | ||
The building is protected by a Notifier System 2500 conventional fire alarm system. The panel is located in the main lobby. The system coding is temporal. | The building is protected by a Notifier System 2500 conventional fire alarm system. The panel is located in the main lobby. The system coding is temporal. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
Most notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd) | Most notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd). | ||
Some areas have System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd) and System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd), both as deficiency replacements. | |||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
Most pull stations are Notifier NFM-950B conventional single-action pull stations | Most pull stations are Notifier NFM-950B conventional single-action pull stations. | ||
Deficiency replacements are as follows: | |||
* Mircom MS-401 conventional single-action pull stations in some areas | |||
* Notifier MPS-950B conventional single-action pull stations in some areas | |||
* Edwards 270-SPO conventional single-action pull stations in the basement. | |||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors at the top of the south stairs, top of the basement stairs, and at the top of the elevator shaft. There is an Edwards C2M-PD conventional photoelectric smoke detector at the top of the north stairs, and an FDD CF-135 conventional 135 fixed temperature heat detector at the bottom of the elevator shaft. | There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors at the top of the south stairs, top of the basement stairs, and at the top of the elevator shaft. | ||
There is an Edwards C2M-PD conventional photoelectric smoke detector at the top of the north stairs, and an FDD CF-135 conventional 135 fixed temperature heat detector at the bottom of the elevator shaft. | |||
==== EOLs ==== | |||
There are Notifier EOL-CR and Edwards EOL-P1 end of line resistor plates on all circuits. | |||
[[Category:Calgary]] | |||
[[Category:Commercial]] | |||
Latest revision as of 13:58, 30 September 2024
| System Specifications |
|---|
| FACP: Notifier System 2500 FACP Location: Main Lobby System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2020s Year Opened: 1910, 2000 |
Louise Block is a historic office building located at 1018 Macleod Trail Southeast, in Calgary, Alberta, Canada. The building opened in 1910 as a mixed commercial/residential building, and was redeveloped in 2000 as an office building, with retail spaces on the main floor. The fire alarm system was upgraded in 2000.
System Specifications (2000s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier System 2500 conventional fire alarm system. The panel is located in the main lobby. The system coding is temporal.
Notification Appliances[edit | edit source]
Most notification appliances are System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
Some areas have System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd) and System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd), both as deficiency replacements.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Notifier NFM-950B conventional single-action pull stations.
Deficiency replacements are as follows:
- Mircom MS-401 conventional single-action pull stations in some areas
- Notifier MPS-950B conventional single-action pull stations in some areas
- Edwards 270-SPO conventional single-action pull stations in the basement.
Automatic Detection Devices[edit | edit source]
There are System Sensor “i3” C2W-BA conventional photoelectric smoke detectors at the top of the south stairs, top of the basement stairs, and at the top of the elevator shaft.
There is an Edwards C2M-PD conventional photoelectric smoke detector at the top of the north stairs, and an FDD CF-135 conventional 135 fixed temperature heat detector at the bottom of the elevator shaft.
EOLs[edit | edit source]
There are Notifier EOL-CR and Edwards EOL-P1 end of line resistor plates on all circuits.