More actions
(Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance <br />System Type: Addressable <br...") |
No edit summary |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2016 <br />Year Opened: | | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2016 <br />Year Opened: 1972 | ||
|} | |} | ||
'''Manchester''' is a City of Calgary operations centre located at 651 25 Avenue Southeast, in Calgary, Alberta, Canada. This page will cover Building R, which is part of the roads division. The building was built in 1972, and the fire alarm system was upgraded in 2016. | |||
'''Manchester''' is a City of Calgary operations centre located at 651 25 Avenue Southeast, in Calgary, Alberta, Canada. | |||
==System Specifications (2016-present)== | ==System Specifications (2016-present)== | ||
====FACP==== | ====FACP==== | ||
The building is protected by a Mircom FX-2000 addressable fire alarm system. | The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd). | All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd). | ||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
All pull stations are Mircom MS-401AD addressable single-action pull stations. | All pull stations are Mircom MS-401AD addressable single-action pull stations. | ||
====Automatic Detection Devices==== | |||
There are Mircom MIX-2251APA addressable photoelectric smoke detectors in some areas. | |||
There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in most areas. | |||
All aforementioned detectors are mounted on System Sensor B210LPA bases. | |||
There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251APA addressable photoelectric heads on all air handling units. | |||
====Modules==== | ====Modules==== | ||
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches. | There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches. | ||
There are Mircom MIX-M500RA addressable relay modules for HVAC shutdown. | |||
There are System Sensor M500XA isolator modules on the SLC. | |||
==== EOLs ==== | |||
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits. | |||
Latest revision as of 14:04, 30 September 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2016 Year Opened: 1972 |
Manchester is a City of Calgary operations centre located at 651 25 Avenue Southeast, in Calgary, Alberta, Canada. This page will cover Building R, which is part of the roads division. The building was built in 1972, and the fire alarm system was upgraded in 2016.
System Specifications (2016-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Mircom MS-401AD addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251APA addressable photoelectric smoke detectors in some areas.
There are Mircom MIX-5251APA addressable 135°F fixed-temperature heat detectors in most areas.
All aforementioned detectors are mounted on System Sensor B210LPA bases.
There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251APA addressable photoelectric heads on all air handling units.
Modules[edit | edit source]
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500RA addressable relay modules for HVAC shutdown.
There are System Sensor M500XA isolator modules on the SLC.
EOLs[edit | edit source]
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.