Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Marlborough Station: Difference between revisions

From FireAlarmPedia
(Confirmed the panel.)
No edit summary
 
(8 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: EST QuickStart QS4 <br /> FACP Location: Electrical Room <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: EST strobes only <br />Date of last known Upgrade: 2013 <br />Year Opened: 1985
| FACP: EST QuickStart QS4 <br />FACP Location: Electrical Room <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous<br>Strobes Synchronized: EST strobes only <br />Date of last known Upgrade: 2013 <br />Year Opened: 1985
|}
|}
'''Marlborough Station''' is a [[CTrain]] light rail station on the Blue Line. It is located near the neighborhood of Marlborough, NE Calgary. The station was built in 1985, but none of the fire alarm system is original. The fire panel seems to be from 2013, as there was construction there that year.  
'''Marlborough Station''' is a [[CTrain]] LRT station on the Blue Line. The station is located at 889 36 Street Northeast, in Calgary, Alberta, Canada. The station opened in 1985, and the fire alarm system was mostly upgraded in 2013. Parts range in age from the 1990s to the 2010s.  
== System Specifications (1990s-present) ==
== System Specifications (1990s-present) ==
==== FACP ====
==== FACP ====
The station is protected by an EST Quickstart QS4 addressable fire alarm system. The panel is located in the main electrical room. This system runs on EST's Signature-series addressable protocol, and likely does code 3 in alarm.  
The building is protected by an EST QuickStart QS4 addressable fire alarm system. The panel is located in the main electrical room, labeled Room #4 in the service corridor. This system runs EST's Signature addressable protocol, and the system coding is continuous.
==== Notification Appliances ====
==== Notification Appliances ====
The notification appliances consist of a General Signal MB6-24 motor bell at the bottom of the stairs, a Wheelock MBS-G6-24 motor bell/strobe at the top of the stairs, and two Edwards MB10-24 motor bells on EST "Integrity" 403-5A-R strobe plates so far seen at the entrance and in an inaccessible area.
The notification appliances consist of:
* A General Signal MB6-24 motor bell (6" gong) at the bottom of the stairs
* A Wheelock MBS-G6-24 motor bell/strobe (6" gong, 1.5cd) at the top of the stairs
* Two Edwards MB10-24 motor bells (10" gong) on EST "Integrity" 403-5A-R strobe plates (15cd) at the entrance and in an inaccessible area.
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
All pull stations are EST SIGA-270 Signature-series addressable single-action "teardrop" pull stations.
All pull stations are EST SIGA-270 addressable single-action pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station.
There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all signal circuits.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Train Stations]]

Latest revision as of 17:04, 30 September 2024

System Specifications
FACP: EST QuickStart QS4
FACP Location: Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: EST strobes only
Date of last known Upgrade: 2013
Year Opened: 1985

Marlborough Station is a CTrain LRT station on the Blue Line. The station is located at 889 36 Street Northeast, in Calgary, Alberta, Canada. The station opened in 1985, and the fire alarm system was mostly upgraded in 2013. Parts range in age from the 1990s to the 2010s.

System Specifications (1990s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST QuickStart QS4 addressable fire alarm system. The panel is located in the main electrical room, labeled Room #4 in the service corridor. This system runs EST's Signature addressable protocol, and the system coding is continuous.

Notification Appliances[edit | edit source]

The notification appliances consist of:

  • A General Signal MB6-24 motor bell (6" gong) at the bottom of the stairs
  • A Wheelock MBS-G6-24 motor bell/strobe (6" gong, 1.5cd) at the top of the stairs
  • Two Edwards MB10-24 motor bells (10" gong) on EST "Integrity" 403-5A-R strobe plates (15cd) at the entrance and in an inaccessible area.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all signal circuits.