Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Richmond Square: Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br /> FACP Location: GoodLife Entrance <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24FWR <br /> System Coding: Temporal <br> Strobes Synchronized: Partially <br />Date of last known Upgrade: 2020 <br />Year Opened: 1978
| FACP: Mircom FX-2000 <br /> FACP Location: GoodLife Entrance <br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24FWR <br /> System Coding: Temporal <br> Strobes Synchronized: Partially <br />Date of last known Upgrade: 2020 <br />Year Opened: 1978
|}
|}
 
'''Richmond Square''' is a midsized shopping plaza located at 3915 51 Street Southwest, in Calgary, Alberta, Canada. The plaza contains Save-On-Foods, Homesense, and GoodLife Fitness. The plaza opened in 1978, and the fire alarm system was upgraded in the 2000s. <br> Note: This page does not cover the Canadian Tire store. See that page here: [[Canadian Tire (Richmond Square)]].
'''Richmond Square''' is a midsized shopping plaza located at 3915 51 Street Southwest, in Calgary, Alberta, Canada. The plaza contains Save-On-Foods, Homesense, and GoodLife Fitness. The plaza opened in 1978, and the fire alarm system was upgraded in the 2000s.
Note: This page does not cover the Canadian Tire store. See that page here: [[Canadian Tire (Richmond Square)]].
 
==System Specifications (2000s-present)==
==System Specifications (2000s-present)==
====FACP====
====FACP====
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the GoodLife entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the GoodLife entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.
 
=====Annunciators=====
=====Annunciators=====
There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the Homesense entrance vestibule. Both annunciators are mounted in a Mircom BB-1002 enclosure.
There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the Homesense entrance vestibule. Both annunciators are mounted in a Mircom BB-1002 enclosure.
 
====Notification Appliances====
====Notification Appliances====
=====GoodLife=====
=====GoodLife=====
All notification appliances are System Sensor P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
All notification appliances are System Sensor P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).
=====Homesense=====
=====Homesense=====
All notification appliances are Mircom FHS-400-WW horn/strobes (white, wall-mount, set to 15cd). These were installed in 2020.
All notification appliances are Mircom FHS-400-WW horn/strobes (white, wall-mount, set to 15cd). These were installed in 2020.
=====Save-On-Foods=====
=====Save-On-Foods=====
Not currently known.
Not currently known.
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
Homesense has Mircom MS-401AP addressable single-action pull stations. All other areas have Mircom MS-401AD addressable single-action pull stations.
Homesense has Mircom MS-401AP addressable single-action pull stations. All other areas have Mircom MS-401AD addressable single-action pull stations.
 
====Automatic Detection Devices====
====Automatic Detection Devices====
The building is fully sprinklered, and there are no detectors publicly visible.
The building is fully sprinklered, and there are no detectors publicly visible.
====Modules====
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.


====Modules====
==== EOLs ====
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Commercial]]

Latest revision as of 23:11, 11 October 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: GoodLife Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24FWR
System Coding: Temporal
Strobes Synchronized: Partially
Date of last known Upgrade: 2020
Year Opened: 1978

Richmond Square is a midsized shopping plaza located at 3915 51 Street Southwest, in Calgary, Alberta, Canada. The plaza contains Save-On-Foods, Homesense, and GoodLife Fitness. The plaza opened in 1978, and the fire alarm system was upgraded in the 2000s.
Note: This page does not cover the Canadian Tire store. See that page here: Canadian Tire (Richmond Square).

System Specifications (2000s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the GoodLife entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the Homesense entrance vestibule. Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances[edit | edit source]

GoodLife[edit | edit source]

All notification appliances are System Sensor P2RLA horn/strobes (red, wall-mount, bilingual lettering, set to 15cd).

Homesense[edit | edit source]

All notification appliances are Mircom FHS-400-WW horn/strobes (white, wall-mount, set to 15cd). These were installed in 2020.

Save-On-Foods[edit | edit source]

Not currently known.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Homesense has Mircom MS-401AP addressable single-action pull stations. All other areas have Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

The building is fully sprinklered, and there are no detectors publicly visible.

Modules[edit | edit source]

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.