More actions
(And there we go! Thanks for existing idk) |
No edit summary |
||
Line 29: | Line 29: | ||
There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all living areas. <br>There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in all non-living areas. <br>There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms. <br>There are System Sensor 5603A conventional fixed-temperature heat detectors in the kitchen and furnace room. | There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all living areas. <br>There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in all non-living areas. <br>There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms. <br>There are System Sensor 5603A conventional fixed-temperature heat detectors in the kitchen and furnace room. | ||
==== EOLs ==== | |||
There are Simplex 2081-9018C end-of-line resistor plates on all circuits. | |||
[[Category:Calgary]] | [[Category:Calgary]] | ||
[[Category:Healthcare]] | [[Category:Healthcare]] |
Latest revision as of 21:00, 12 October 2024
System Specifications |
---|
FACP: Mircom FA-1025T FACP Location: Main Office System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Date of last known Upgrade: 2010s Year Opened: 1987 |
Scenic Bow Place is a group home complex owned by Alberta Health Services. This page will cover Group Home 25, located at #138 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system was fully replaced in the 2010s.
System Specifications (2010s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the main office. The system coding is continuous.
Notification Appliances[edit | edit source]
The only notification appliance is a Simplex 2901-9723 motor bell (6” gong).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
There are no pull stations on this system.
Automatic Detection Devices[edit | edit source]
There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all living areas.
There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in all non-living areas.
There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.
There are System Sensor 5603A conventional fixed-temperature heat detectors in the kitchen and furnace room.
EOLs[edit | edit source]
There are Simplex 2081-9018C end-of-line resistor plates on all circuits.