More actions
(Shell bourne) |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Notifier NFS-320C <br /> FACP Location: North Entrance <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Continuous <br> Strobes Synchronized: N/A <br />Date of last known Upgrade: 2010s <br />Year Opened: 1978 | | FACP: Notifier NFS-320C <br /> FACP Location: North Entrance <br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Continuous <br> Strobes Synchronized: N/A <br />Date of last known Upgrade: 2010s <br />Year Opened: 1978 | ||
|} | |} | ||
'''Shelbourne Place''' is a small mixed-use building located at 1013 17 Avenue Southwest, in Calgary, Alberta, Canada. The building opened in 1978, and the fire alarm system has been upgraded over the years. | '''Shelbourne Place''' is a small mixed-use building located at 1013 17 Avenue Southwest, in Calgary, Alberta, Canada. The building opened in 1978, and the fire alarm system has been upgraded over the years. | ||
==System Specifications== | ==System Specifications== | ||
====FACP==== | ====FACP==== | ||
The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel is located at the front entrance. The system has zone cards to accommodate the conventional devices on the system, and the system coding is continuous. | The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel is located at the front entrance. The system has zone cards to accommodate the conventional devices on the system, and the system coding is continuous. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong). | Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong). | ||
Some areas have Notifier KMS-6-24A motor bells (6” gong) as deficiency replacements. | |||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
Most pull stations are Edwards 270-SPO conventional single-action pull stations | Most pull stations are Edwards 270-SPO conventional single-action pull stations. | ||
Some areas have Notifier MPS-950B conventional single-action pull stations as deficiency replacements. | |||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are Edwards EC30U-3 conventional photoelectric smoke detectors at the top of each stairwell. There are FDD CR-135 conventional 135 degree fixed/rate-of-rise heat detectors throughout, and System Sensor 5601A conventional fixed/rate-of-rise heat detectors in some areas. The building is not equipped with a sprinkler system. | There are Edwards EC30U-3 conventional photoelectric smoke detectors at the top of each stairwell. | ||
There are FDD CR-135 conventional 135 degree fixed/rate-of-rise heat detectors throughout, and System Sensor 5601A conventional fixed/rate-of-rise heat detectors in some areas. The building is not equipped with a sprinkler system. | |||
==== EOLs ==== | |||
There are Edwards EOL-P1 end-of-line resistor plates on all circuits. | |||
[[Category:Commercial]] | |||
[[Category:Calgary]] | |||
Latest revision as of 21:06, 12 October 2024
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: North Entrance System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: N/A Date of last known Upgrade: 2010s Year Opened: 1978 |
Shelbourne Place is a small mixed-use building located at 1013 17 Avenue Southwest, in Calgary, Alberta, Canada. The building opened in 1978, and the fire alarm system has been upgraded over the years.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier NFS-320C conventional fire alarm system. The panel is located at the front entrance. The system has zone cards to accommodate the conventional devices on the system, and the system coding is continuous.
Notification Appliances[edit | edit source]
Most notification appliances are Edwards 439D-6AWC vibrating bells (6” gong).
Some areas have Notifier KMS-6-24A motor bells (6” gong) as deficiency replacements.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Edwards 270-SPO conventional single-action pull stations.
Some areas have Notifier MPS-950B conventional single-action pull stations as deficiency replacements.
Automatic Detection Devices[edit | edit source]
There are Edwards EC30U-3 conventional photoelectric smoke detectors at the top of each stairwell.
There are FDD CR-135 conventional 135 degree fixed/rate-of-rise heat detectors throughout, and System Sensor 5601A conventional fixed/rate-of-rise heat detectors in some areas. The building is not equipped with a sprinkler system.
EOLs[edit | edit source]
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.