Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Melcor YMCA at Crowfoot/Crowfoot Arena: Difference between revisions

From FireAlarmPedia
(Probably the coolest system in the city! I'm so happy I could make the page to share it with everyone.)
 
(Mirror Com with rare horns!)
 
(14 intermediate revisions by 3 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br /> FACP Location: Arena Entrance <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal? <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2022 <br />Year Opened: 1995
| FACP: Mircom FX-2000 <br />FACP Location: Arena Entrance Vestibule<br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal? <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2022 <br />Year Opened: 1991 (arena) <br>1996 (YMCA)
|}
|}


'''Melcor YMCA at Crowfoot''' is a large recreation centre located at 8100 John Laurie Boulevard Northwest, in Calgary, Alberta, Canada.  The building houses a pool, a fitness centre, and shares a building with the Crowfoot Arena, which has a separate entrance.  The building opened in 1995, and the system was partially upgraded in the 2000s; most notification appliances are original. The fire alarm system is serviced by Sprouse Fire & Safety.
'''Melcor YMCA at Crowfoot''' is a large recreation centre located at 8100 John Laurie Boulevard Northwest, in Calgary, Alberta, Canada.  The building houses a pool, a fitness centre, and shares a building with the Crowfoot Arena, which has a separate entrance.  The Crowfoot Arena was built in the late 1980s when the original Crowfoot Rec Centre was built, and had a system upgrade in 1991 after the facility closed. The YMCA was added on in 1996, and officially opened in 1997. The system was partially upgraded in 2007; most notification appliances are original.


==System Specifications (2000s-present)==
==System Specifications (2007-present)==
====FACP====
====FACP====
The building is protected by a Mircom FX-2000 addressable fire alarm system.  The panel is located in the Crowfoot Arena entrance vestibule.  The system runs Mircom’s CLIP addressable protocol, and the system coding is likely temporal.
The building is protected by a Mircom FX-2000 addressable fire alarm system.  The panel is located in the Crowfoot Arena entrance vestibule.  The system runs Mircom’s CLIP addressable protocol, and the system coding is likely continuous.


=====Annunciators=====
=====Annunciators=====
Line 18: Line 18:


====Notification Appliances====
====Notification Appliances====
=====Melcor YMCA=====
=====Melcor YMCA (1996) =====
Most notification appliances are Simplex 12901-9801 remote mechanical horns (red) mounted on Simplex 4903-9101 strobe plates (4.75cd).  The aforementioned horns are also mounted on Wheelock WS strobe plates in some areas (model to be confirmed, 1.5cd).  The main lobby and kiddie pool area have System Sensor P2RLA horn/strobes (red, wall-mount, set to 15cd) as deficiency replacements.  There are Wheelock MT-24-WS horn/strobes (red, wall-mount, 1.5cd) labeled “ALARM”, for unknown purposes.
Most notification appliances are Simplex 12901-9801 remote mechanical horns (red) mounted on Simplex 4903-9101 strobe plates (4.75cd).  <br> The aforementioned horns are also mounted on Wheelock VLPS-24 strobe plates (1.5cd) in some areas<br> The main lobby and kiddie pool area have System Sensor "L-Series" P4RLA horn/strobes (red, wall-mount, set to 15cd) as deficiency replacements.  <br> There are Wheelock MT-24-WS horn/strobes (red, wall-mount, 1.5cd) labeled “ALARM”, for unknown purposes.
=====Crowfoot Arena=====
 
All audible notification appliances are Edwards 439D-10AWC vibrating bells (10” gong).  Most are mounted on Wheelock WS-series strobe plates (model to be confirmed, 1.5cd).  Some are mounted on Wheelock RSSP-2415W strobe plates (15cd) or Edwards 403-5A-R strobe plates (15cd) as deficiency replacements.
=====Crowfoot Arena (1991) =====
All audible notification appliances are Edwards 439D-10AWC vibrating bells (10” gong).  Most are mounted on Wheelock VLPS-24 strobe plates (1.5cd).  <br>Some are mounted on Wheelock RSSP-2415W strobe plates (15cd) or Edwards 403-5A-R strobe plates (15cd) as deficiency replacements.
=====Outdoors=====
=====Outdoors=====
There is a Faraday 4466B61424DC vibrating bell (6” gong) outside an emergency exit.
There is a Faraday 4466B61424DC vibrating bell (6” gong) outside an emergency exit on the YMCA side.


===Initiating Devices===
===Initiating Devices===
Line 30: Line 31:


====Automatic Detection Devices====
====Automatic Detection Devices====
All publicly accessible areas are protected by a sprinkler system with waterflow detection.  As such, no detectors are present in these areas.
None noticed.


====Modules====
====Modules====
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.


==Deficiencies==
==== EOLs ====
December 30, 2022: The main FACP had a positive ground fault on SLC1. The panel was not acknowledged as of 4:30 PM.
There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Recreation Centres]]
[[Category:Arenas]]

Latest revision as of 22:01, 12 October 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Arena Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Strobes Synchronized: No
Date of last known Upgrade: 2022
Year Opened: 1991 (arena)
1996 (YMCA)

Melcor YMCA at Crowfoot is a large recreation centre located at 8100 John Laurie Boulevard Northwest, in Calgary, Alberta, Canada. The building houses a pool, a fitness centre, and shares a building with the Crowfoot Arena, which has a separate entrance. The Crowfoot Arena was built in the late 1980s when the original Crowfoot Rec Centre was built, and had a system upgrade in 1991 after the facility closed. The YMCA was added on in 1996, and officially opened in 1997. The system was partially upgraded in 2007; most notification appliances are original.

System Specifications (2007-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the Crowfoot Arena entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is likely continuous.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the YMCA entrance vestibule. Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances[edit | edit source]

Melcor YMCA (1996)[edit | edit source]

Most notification appliances are Simplex 12901-9801 remote mechanical horns (red) mounted on Simplex 4903-9101 strobe plates (4.75cd).
The aforementioned horns are also mounted on Wheelock VLPS-24 strobe plates (1.5cd) in some areas.
The main lobby and kiddie pool area have System Sensor "L-Series" P4RLA horn/strobes (red, wall-mount, set to 15cd) as deficiency replacements.
There are Wheelock MT-24-WS horn/strobes (red, wall-mount, 1.5cd) labeled “ALARM”, for unknown purposes.

Crowfoot Arena (1991)[edit | edit source]

All audible notification appliances are Edwards 439D-10AWC vibrating bells (10” gong). Most are mounted on Wheelock VLPS-24 strobe plates (1.5cd).
Some are mounted on Wheelock RSSP-2415W strobe plates (15cd) or Edwards 403-5A-R strobe plates (15cd) as deficiency replacements.

Outdoors[edit | edit source]

There is a Faraday 4466B61424DC vibrating bell (6” gong) outside an emergency exit on the YMCA side.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.