More actions
m (Alberta Fire Alarms moved page City of Calgary Spring Gardens G1 to Spring Gardens G1 (City of Calgary) without leaving a redirect) |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Mircom FA-1025T <br />FACP Location: Main Entrance <br />System Type: Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: 2010s <br />Year Opened: 1983? | | FACP: Mircom FA-1025T <br />FACP Location: Main Entrance <br />System Type: Single-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: 2010s <br />Year Opened: 1983? | ||
|} | |} | ||
'''Spring Gardens''' is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G1, which is… The building was built around 1983, and the fire alarm system was upgraded in the 2010s. | '''Spring Gardens''' is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G1, which is… The building was built around 1983, and the fire alarm system was upgraded in the 2010s. | ||
== System Specifications (2010s-present) == | == System Specifications (2010s-present) == | ||
==== FACP ==== | ==== FACP ==== | ||
The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal. | The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal. | ||
==== Notification Appliances ==== | ==== Notification Appliances ==== | ||
All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd). | All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd). | ||
=== Initiating Devices === | === Initiating Devices === | ||
==== Pull Stations ==== | ==== Pull Stations ==== | ||
All pull stations are Mircom MS-401 conventional single-action pull stations. | All pull stations are Mircom MS-401 conventional single-action pull stations. | ||
==== Automatic Detection Devices ==== | ==== Automatic Detection Devices ==== | ||
There are FDD CR-135 conventional 135 degree fixed/rate-of-rise heat detectors throughout the building. <br> The main shop has a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector. <br> The office has a System Sensor “i3” C2W-BA conventional photoelectric smoke detector. <br> Some areas have FDD CR-135-EWT explosion-proof conventional 135 degree fixed/rate-of-rise heat detectors. | |||
There are | ==== EOLs ==== | ||
There are Mircom MP-300 end of line resistor plates on all circuits. | |||
[[Category:Calgary]] | |||
Latest revision as of 14:02, 13 October 2024
| System Specifications |
|---|
| FACP: Mircom FA-1025T FACP Location: Main Entrance System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: 2010s Year Opened: 1983? |
Spring Gardens is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G1, which is… The building was built around 1983, and the fire alarm system was upgraded in the 2010s.
System Specifications (2010s-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.
Notification Appliances[edit | edit source]
All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Mircom MS-401 conventional single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are FDD CR-135 conventional 135 degree fixed/rate-of-rise heat detectors throughout the building.
The main shop has a System Sensor 5601A conventional 135°F fixed-temperature/rate-of-rise heat detector.
The office has a System Sensor “i3” C2W-BA conventional photoelectric smoke detector.
Some areas have FDD CR-135-EWT explosion-proof conventional 135 degree fixed/rate-of-rise heat detectors.
EOLs[edit | edit source]
There are Mircom MP-300 end of line resistor plates on all circuits.