Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Spring Gardens G (City of Calgary): Difference between revisions

From FireAlarmPedia
m (Alberta Fire Alarms moved page City of Calgary Spring Gardens G to Spring Gardens G (City of Calgary) without leaving a redirect)
No edit summary
 
(One intermediate revision by the same user not shown)
Line 6: Line 6:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: Early 2010s <br />Year Opened: 1982
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: Early 2010s <br />Year Opened: 1982
|}
|}
 
'''Spring Gardens''' is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G, which is… The building was built in 1982, and the fire alarm system was upgraded in the 2010s.
'''Spring Gardens''' is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G, which is… The building was built in 1982, and the fire alarm system was upgraded in the 2010s.
 
== System Specifications (2010s-present) ==
== System Specifications (2010s-present) ==
==== FACP ====
==== FACP ====
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.  
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.  
==== Notification Appliances ====
==== Notification Appliances ====
All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).
All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
Most pull stations are Mircom MS-401AD addressable pull stations <br> There are some Mircom MS-401AP addressable pull stations as deficiency replacements.  
Most pull stations are Mircom MS-401AD addressable pull stations <br> There are some Mircom MS-401AP addressable pull stations as deficiency replacements.  
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are Mircom MIX-2251BA addressable photoelectric smoke detectors in most areas. <br> Some areas have Mircom MIX-5251RBA addressable thermal rate-of-rise heat detectors. <br> All detectors are mounted on System Sensor B210LPA bases. <br> There are Mircom MIX-3100 addressable photoelectric duct smoke detectors on all air handling units.


There are Mircom MIX-2251BA addressable photoelectric smoke detectors in most areas. <br> Some areas have Mircom MIX-5251RBA addressable thermal rate-of-rise heat detectors. <br> All detectors are mounted on System Sensor B210LPA bases. <br> There are Mircom MIX-3100 addressable photoelectric duct smoke detectors on all air handling units.
==== EOLs ====
There are Mircom MP-300 end of line resistor plates on all signal circuits.
[[Category:Calgary]]

Latest revision as of 14:02, 13 October 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: Early 2010s
Year Opened: 1982

Spring Gardens is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G, which is… The building was built in 1982, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Mircom MS-401AD addressable pull stations
There are some Mircom MS-401AP addressable pull stations as deficiency replacements.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors in most areas.
Some areas have Mircom MIX-5251RBA addressable thermal rate-of-rise heat detectors.
All detectors are mounted on System Sensor B210LPA bases.
There are Mircom MIX-3100 addressable photoelectric duct smoke detectors on all air handling units.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all signal circuits.