Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

St. Sebastian School: Difference between revisions

From FireAlarmPedia
mNo edit summary
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 6: Line 6:
|
|
|-
|-
|FACP: EST FireShield Plus<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR
|FACP: EST FireShield Plus <br> FACP Location: Main Office
System Type: Conventional <br />Date of last upgrade: 2018 <br />Year Built: 2008
System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br>
System Coding: Temporal <br>
Strobes Synchronized: Yes<br />Date of last upgrade: 2018 <br />Year Built: 2008
|}
|}
'''St. Sebastian School''' is an elementary school located in Chaparral, in Southeast Calgary. It is in the Calgary Catholic School District. It has a capacity of about 500 students. It was built in 2008, and some of the system is original.  
'''St. Sebastian School''' is an elementary school located at 65 Chaparral Drive SE, Calgary. It is in the Calgary Catholic School District. It has a capacity of about 500 students. It was built in 2007, and some of the system is original.


Note: The pull stations are guesses, as the devices have only been seen from the outside, and no pull stations were visible from the front door.
Note: The pull stations are guesses, as the devices have only been seen from the outside, and no pull stations were visible from the front door.
==System Specifications==
==System Specifications==
====FACP====
==== FACP ====
The school is protected by an EST FireShield Plus FSP-1004G conventional fire alarm control panel.
The school is protected by an EST FireShield Plus FSP-1004G conventional fire alarm system. The panel is located in the main office. The system coding is temporal.
====Notification Appliances====
====Notification Appliances====
All notification appliances are EST Genesis G1R-HDVM (red, wall mount, no FIRE) horn/strobes. They are not original, because they replaced Edwards MB6-24 motor bells on EST "Integrity" 403-5A-R strobe plates.
All notification appliances are EST "Genesis" G1R-HDVM (red, wall mount, no FIRE) horn/strobes.
 
These replaced Edwards MB6-24 (6" gong) motor bells on EST "Integrity" 403-5A-R (15cd) strobe plates in 2018.
 
Outside, there was an Edwards MB10-24 motor bell (10" gong) with an EST CS405-8A-T (red, 110cd) weatherproof strobe.
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
The pull stations are likely Edwards 270-SPO. It is unknown if they are original.
All pull stations are Edwards 270-SPO conventional single-action pull stations.
====Automatic Detection Devices====
==== Automatic Detection Devices====
None noticed.
None noticed.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.
[[Category:Facilities]]
[[Category:Schools]]
[[Category:Calgary]]

Latest revision as of 22:03, 13 October 2024

System Specifications
FACP: EST FireShield Plus
FACP Location: Main Office

System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes
Date of last upgrade: 2018
Year Built: 2008

St. Sebastian School is an elementary school located at 65 Chaparral Drive SE, Calgary. It is in the Calgary Catholic School District. It has a capacity of about 500 students. It was built in 2007, and some of the system is original.

Note: The pull stations are guesses, as the devices have only been seen from the outside, and no pull stations were visible from the front door.

System Specifications[edit | edit source]

FACP[edit | edit source]

The school is protected by an EST FireShield Plus FSP-1004G conventional fire alarm system. The panel is located in the main office. The system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are EST "Genesis" G1R-HDVM (red, wall mount, no FIRE) horn/strobes.

These replaced Edwards MB6-24 (6" gong) motor bells on EST "Integrity" 403-5A-R (15cd) strobe plates in 2018.

Outside, there was an Edwards MB10-24 motor bell (10" gong) with an EST CS405-8A-T (red, 110cd) weatherproof strobe.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.