More actions
No edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: EST3X <br /> FACP Location: Entrance System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br /> Strobes Synchronized: Yes, EST Date of last known Upgrade: 2013<br />Year Opened: 1950<br /> Year Demolished: 2021 | | FACP: Edwards EST3X <br /> FACP Location: Entrance <br> System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br /> Strobes Synchronized: Yes, EST | ||
Date of last known Upgrade: 2013<br />Year Opened: 1950<br /> Year Demolished: 2021 | |||
|} | |} | ||
'''Stampede Corral''' was an ice hockey arena located at 10 Corral Trail SE in Calgary, Alberta. The arena had 7,475 seats, and was the home of the Calgary Flames from 1980 to 1983. The arena opened its doors in 1950, and was demolished in 2021 to make room for the BMO Centre expansion. The fire alarm system was replaced in 2013, following the floods. | '''Stampede Corral''' was an ice hockey arena located at 10 Corral Trail SE in Calgary, Alberta. The arena had 7,475 seats, and was the home of the Calgary Flames from 1980 to 1983. The arena opened its doors in 1950, and was demolished in 2021 to make room for the BMO Centre expansion. The fire alarm system was replaced in 2013, following the floods. | ||
==System Specifications== | ==System Specifications== | ||
====FACP==== | ====FACP==== | ||
The arena was protected by an EST3X addressable fire alarm system. The panel was located at one of the entrances. The system ran EST’s Signature | The arena was protected by an Edwards EST3X addressable fire alarm system. The panel was located at one of the entrances. The system ran EST’s Signature addressable protocol, and the system coding was temporal. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
All notification appliances were EST “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no FIRE, multi-candela). These were mounted on the existing 4” boxes, using EST G1RT-FIRE adapter trim plates. | All notification appliances were EST “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no FIRE, multi-candela). | ||
These were mounted on the existing 4” boxes, using EST G1RT-FIRE adapter trim plates. | |||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
| Line 18: | Line 21: | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
Not known. | Not known. | ||
==== EOLs ==== | |||
There were Edwards EOL-P1 end-of-line resistors on all signal circuits. | |||
[[Category:Facilities]] | [[Category:Facilities]] | ||
[[Category:Calgary]] | [[Category:Calgary]] | ||
[[Category:Arenas]] | [[Category:Arenas]] | ||
[[Category:Event Centres]] | [[Category:Event Centres]] | ||
Latest revision as of 23:06, 13 October 2024
| System Specifications |
|---|
| FACP: Edwards EST3X FACP Location: Entrance System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, EST Date of last known Upgrade: 2013 |
Stampede Corral was an ice hockey arena located at 10 Corral Trail SE in Calgary, Alberta. The arena had 7,475 seats, and was the home of the Calgary Flames from 1980 to 1983. The arena opened its doors in 1950, and was demolished in 2021 to make room for the BMO Centre expansion. The fire alarm system was replaced in 2013, following the floods.
System Specifications[edit | edit source]
FACP[edit | edit source]
The arena was protected by an Edwards EST3X addressable fire alarm system. The panel was located at one of the entrances. The system ran EST’s Signature addressable protocol, and the system coding was temporal.
Notification Appliances[edit | edit source]
All notification appliances were EST “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no FIRE, multi-candela).
These were mounted on the existing 4” boxes, using EST G1RT-FIRE adapter trim plates.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations were EST SIGA-270 addressable single-action pull stations.
Automatic Detection Devices[edit | edit source]
Not known.
EOLs[edit | edit source]
There were Edwards EOL-P1 end-of-line resistors on all signal circuits.