Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Tillebrook Provincial Park Office: Difference between revisions

From FireAlarmPedia
No edit summary
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
'''Tillebrook Provincial Park''' is a provincial park near Tilley, AB. There is a campground, with a park office that a fire alarm system, but is not powered up and in use.  
{| style="float:right;border:2px solid black"
|-
! System Specifications
|-
|
|-
| FACP: EST FireShield FS302G <br /> FACP Location: Main Entrancee <br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized <br />Date of System Installation: 2007? <br />Year Opened: 1969
|}
'''Tillebrook Provincial Park''' is a provincial park located on Township Road 183A, in Tilley, Alberta, Canada. The park contains a day use area and five campground loops. This page will cover the park office, which is the only building with a fire alarm system. The building opened in 1969, and the fire alarm system is from 2007.


== System Specifications ==
Note: This fire alarm system is not in use. The system does not have power, and will not detect a fire or warn people.
==System Specifications (2007-present)==
====FACP====
The building is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located next to the main entrance. The system coding is temporal.
====Notification Appliances====
The only notification appliance is an EST “Genesis” G1R-HDVM horn/strobe (red, wall-mount).
===Initiating Devices===
====Pull Stations====
Both pull stations are Edwards 270-SPO conventional single-action pull stations.
====Automatic Detection Devices====
There are two Edwards EC30U-3 conventional photoelectric smoke detectors in the building.


==== FACP ====
==== EOLs ====
 
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.
The fire alarm control panel is a 1-zone EST FireShield. It is located at the entrance of the park office. The panel is currently not powered up, it still is basically new from factory.
 
==== Notification Appliances ====
 
The notification appliance is an EST Genesis G1R-HDVM (red, wall, no FIRE marking) horn/strobe. It is right beside the entrance, and is currently not in use.
 
=== Initiating Devices ===
 
==== Pull Stations ====
 
The only pull station is an Edwards 270-SPO. It is installed, but not in use.
 
==== Automatic Detection Devices ====
 
None noticed.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Alberta]]
[[Category:Campgrounds]]

Latest revision as of 16:35, 14 October 2024

System Specifications
FACP: EST FireShield FS302G
FACP Location: Main Entrancee
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized
Date of System Installation: 2007?
Year Opened: 1969

Tillebrook Provincial Park is a provincial park located on Township Road 183A, in Tilley, Alberta, Canada. The park contains a day use area and five campground loops. This page will cover the park office, which is the only building with a fire alarm system. The building opened in 1969, and the fire alarm system is from 2007.

Note: This fire alarm system is not in use. The system does not have power, and will not detect a fire or warn people.

System Specifications (2007-present)

FACP

The building is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located next to the main entrance. The system coding is temporal.

Notification Appliances

The only notification appliance is an EST “Genesis” G1R-HDVM horn/strobe (red, wall-mount).

Initiating Devices

Pull Stations

Both pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are two Edwards EC30U-3 conventional photoelectric smoke detectors in the building.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.