Tillebrook Provincial Park Office: Difference between revisions

Latest revision as of 16:35, 14 October 2024

System Specifications

FACP: EST FireShield FS302G FACP Location: Main Entrancee System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized Date of System Installation: 2007? Year Opened: 1969

Tillebrook Provincial Park is a provincial park located on Township Road 183A, in Tilley, Alberta, Canada. The park contains a day use area and five campground loops. This page will cover the park office, which is the only building with a fire alarm system. The building opened in 1969, and the fire alarm system is from 2007.

Note: This fire alarm system is not in use. The system does not have power, and will not detect a fire or warn people.

System Specifications (2007-present)

FACP

The building is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located next to the main entrance. The system coding is temporal.

Notification Appliances

The only notification appliance is an EST “Genesis” G1R-HDVM horn/strobe (red, wall-mount).

Initiating Devices

Pull Stations

Both pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are two Edwards EC30U-3 conventional photoelectric smoke detectors in the building.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.

@@ Line 1: / Line 1: @@
-'''Tillebrook Provincial Park''' is a provincial park near Tilley, AB. There is a campground, with a park office that has a fire alarm system, but the system is not in use.
+{| style="float:right;border:2px solid black"
-== System Specifications ==
+|-
-==== FACP ====
+! System Specifications
-The fire alarm control panel is a 1-zone EST FireShield. It is located at the entrance of the park office. The panel is currently not powered up, it is essentially factory new.
+|-
-==== Notification Appliances ====
+|
-The notification appliance is an EST Genesis G1R-HDVM (red, wall, no FIRE marking) horn/strobe. It is right beside the entrance, and is currently not in use.
+|-
-=== Initiating Devices ===
+| FACP: EST FireShield FS302G <br /> FACP Location: Main Entrancee <br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized <br />Date of System Installation: 2007? <br />Year Opened: 1969
-==== Pull Stations ====
+|}
-There are two pull stations, both being Edwards 270-SPOs.  They are installed, but not in use.
+'''Tillebrook Provincial Park''' is a provincial park located on Township Road 183A, in Tilley, Alberta, Canada. The park contains a day use area and five campground loops. This page will cover the park office, which is the only building with a fire alarm system. The building opened in 1969, and the fire alarm system is from 2007.
-==== Automatic Detection Devices ====
-There is an Edwards SC10U-3 smoke detector located on the ceiling.
+Note: This fire alarm system is not in use. The system does not have power, and will not detect a fire or warn people.
+==System Specifications (2007-present)==
+====FACP====
+The building is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located next to the main entrance. The system coding is temporal.
+====Notification Appliances====
+The only notification appliance is an EST “Genesis” G1R-HDVM horn/strobe (red, wall-mount).
+===Initiating Devices===
+====Pull Stations====
+Both pull stations are Edwards 270-SPO conventional single-action pull stations.
+====Automatic Detection Devices====
+There are two Edwards EC30U-3 conventional photoelectric smoke detectors in the building.
+==== EOLs ====
+There are Edwards EOL-P1 end-of-line resistor plates on all circuits.
 [[Category:Facilities]]
+[[Category:Alberta]]
+[[Category:Campgrounds]]