Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

University of Calgary Kinesiology A: Difference between revisions

From FireAlarmPedia
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Simplex 4100ES <br /> FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 70.7VRMS (Audible) <br> 24VDC (Visual) <br /> System Coding: Unknown <br> Strobes Synchronized: Yes, SmartSync<br />Date of last known Upgrade: 2020 (full overhaul) <br />Year Opened: 1962
| FACP: Simplex 4100ES <br /> FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 70.7VRMS (Audible) <br> 24VDC (Visual) <br /> System Coding: Unknown <br> Strobes Synchronized: Yes, SmartSync<br />Date of last known Upgrade: 2020 (full overhaul) <br />Year Opened: 1962
|}
|}
The '''University of Calagry''' is a public university located in Calgary, Alberta, Canada. This page will cover the '''Kinesiology A''' building, which opened in 1962 and underwent an expansion in 1971. The fire alarm system was installed in 2020.
The '''University of Calagry''' is a public university located in Calgary, Alberta, Canada. This page will cover the '''Kinesiology A''' building, which opened in 1962 and underwent an expansion in 1971. The fire alarm system was fully upgraded in 2020.
==System Specifications (2020-present)==
==System Specifications (2020-present)==
====FACP====
====FACP====
Line 22: Line 22:
====Automatic Detection Devices====
====Automatic Detection Devices====
There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout the building, mounted on 4098-9792 addressable bases.
There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout the building, mounted on 4098-9792 addressable bases.
==== EOLs ====
There are Simplex 2081-9040C end-of-line resistor plates on all signal circuits.
==System Specifications (1962-2020)==
==System Specifications (1962-2020)==
{| style="float:right;border:2px solid black"
{| style="float:right;border:2px solid black"
Line 29: Line 33:
|  
|  
|-
|-
| FACP: Simplex 4100ES <br /> FACP Location: Main Entrance Vestibule <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br />Date of last known Upgrade: 2016 <br />Year Decommissioned: 2020
| FACP: Edwards 1221T w/ Simplex 4100ES<br /> FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 12VAC<br /> System Coding: Continuous<br />Date of last known Upgrade: 2016 <br />Year Decommissioned: 2020
|}
|}
====FACP====
====FACP====
The building was protected by a Simplex 4100ES conventional fire alarm system. The panel was located in the main entrance vestibule, and was equipped with InfoAlarm Command Center. The system coding was temporal.  
The building was protected by Edwards 1221T and Simplex 4100ES conventional fire alarm systems. The 4100ES was located in the main entrance vestibule and was equipped with InfoAlarm Command Center, and the 1221T was located in an electrical room. The system coding was continuous, as the notification appliances were fed off of the 1221T.
 
The 4100ES was installed in 2016 to monitor the initiating devices and due to addition of some detectors. The panel had a relay to trip the 1221T during an alarm.  


This panel replaced a conventional Simplex 2120 in 2016 to add more detectors, which replaced an Edwards Custom 6500 in 1987 which in turn replaced an Edwards 1221T in 1971. This system unfortunately was replaced in 2020 with an addressable variant with voice evacuation.  
This system unfortunately was replaced in 2020 with an addressable variant with voice evacuation, lasting a mere 58 years in service.
===== FACP Accessories =====
The 4100ES had a Simplex 4100-1293 printer module for logging the alarm events.
===== Annunciators =====
===== Annunciators =====
There is an Edwards 456 annunciator in the entrance, disconnected.
There is an Edwards 456 annunciator in the entrance, disconnected.
====Notification Appliances====
====Notification Appliances====
All notification appliances were Edwards “Adaptahorn” 361 horns (red, flush-mount, 24VDC). These were original in both wings.  
All notification appliances were Edwards “Adaptahorn” 360A vibrating horns (red, flush-mount, 12VAC). These were original in both wings.  


The ones installed in the 1971 expansion had “FIRE HORN” on them.  
The ones installed in the 1971 expansion had “FIRE HORN” on them. These were powered by the 1221T.  


According to campus security, despite their age, these horns were very loud and were one of the best-working alarms on campus! The horns in the original area lasted 58 years in service.
According to campus security, despite their age, these horns were very loud and were one of the best-working alarms on campus!  
===Initiating Devices===
===Initiating Devices===
The initiating devices were connected to the 4100ES.
====Pull Stations====
====Pull Stations====
Most pull stations were the original first-generation Edwards 270-SPO conventional single-action pull stations. Variants up to third generation 270-SPO’s could be found as deficiency replacements.  
Most pull stations were the original first-generation Edwards 270-SPO conventional single-action pull stations. Variants up to third generation 270-SPO’s could be found as deficiency replacements.  
Line 49: Line 58:
Some areas had Simplex 2099-9754 conventional single-action pull stations as deficiency replacements.
Some areas had Simplex 2099-9754 conventional single-action pull stations as deficiency replacements.
====Automatic Detection Devices====
====Automatic Detection Devices====
Not known.
Not known, most likely Simplex 4098-9601 conventional photoelectric smoke detectors mounted on 4098-9788 bases.
 
==== EOLs ====
There were Simplex 2081-9040C end-of-line resistor plates on each conventional zone.
[[Category:Facilities]]
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Post-Secondary]]

Latest revision as of 17:59, 14 October 2024

System Specifications
FACP: Simplex 4100ES
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS (Audible)
24VDC (Visual)
System Coding: Unknown
Strobes Synchronized: Yes, SmartSync
Date of last known Upgrade: 2020 (full overhaul)
Year Opened: 1962

The University of Calagry is a public university located in Calgary, Alberta, Canada. This page will cover the Kinesiology A building, which opened in 1962 and underwent an expansion in 1971. The fire alarm system was fully upgraded in 2020.

System Specifications (2020-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Simplex 4100ES addressable fire alarm system. The panel is located in the main entrance vestibule, and is equipped with the InfoAlarm Command Center. The system runs Simplex’s IDNet addressable protocol, and is equipped with voice evacuation. The messages and/or tones are unknown at this time.

The system replaced a conventional, non-voice evac 4100ES due to that system being outdated.

Notification Appliances[edit | edit source]

All indoor notification appliances are Simplex “TrueAlert” 4906-9151 speaker/strobes (red, wall-mount).

For outdoor notification, there is a Simplex 4906-9105 weatherproof remote strobe (red, wall-mount) outside the main entrance.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Simplex 4099-9001 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Simplex “TrueAlarm” 4098-9714 addressable photoelectric smoke detectors throughout the building, mounted on 4098-9792 addressable bases.

EOLs[edit | edit source]

There are Simplex 2081-9040C end-of-line resistor plates on all signal circuits.

System Specifications (1962-2020)[edit | edit source]

System Specifications
FACP: Edwards 1221T w/ Simplex 4100ES
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 12VAC
System Coding: Continuous
Date of last known Upgrade: 2016
Year Decommissioned: 2020

FACP[edit | edit source]

The building was protected by Edwards 1221T and Simplex 4100ES conventional fire alarm systems. The 4100ES was located in the main entrance vestibule and was equipped with InfoAlarm Command Center, and the 1221T was located in an electrical room. The system coding was continuous, as the notification appliances were fed off of the 1221T.

The 4100ES was installed in 2016 to monitor the initiating devices and due to addition of some detectors. The panel had a relay to trip the 1221T during an alarm.

This system unfortunately was replaced in 2020 with an addressable variant with voice evacuation, lasting a mere 58 years in service.

FACP Accessories[edit | edit source]

The 4100ES had a Simplex 4100-1293 printer module for logging the alarm events.

Annunciators[edit | edit source]

There is an Edwards 456 annunciator in the entrance, disconnected.

Notification Appliances[edit | edit source]

All notification appliances were Edwards “Adaptahorn” 360A vibrating horns (red, flush-mount, 12VAC). These were original in both wings.

The ones installed in the 1971 expansion had “FIRE HORN” on them. These were powered by the 1221T.

According to campus security, despite their age, these horns were very loud and were one of the best-working alarms on campus!

Initiating Devices[edit | edit source]

The initiating devices were connected to the 4100ES.

Pull Stations[edit | edit source]

Most pull stations were the original first-generation Edwards 270-SPO conventional single-action pull stations. Variants up to third generation 270-SPO’s could be found as deficiency replacements.

Some areas had Simplex 2099-9754 conventional single-action pull stations as deficiency replacements.

Automatic Detection Devices[edit | edit source]

Not known, most likely Simplex 4098-9601 conventional photoelectric smoke detectors mounted on 4098-9788 bases.

EOLs[edit | edit source]

There were Simplex 2081-9040C end-of-line resistor plates on each conventional zone.