Vogue (Condo Building): Difference between revisions

VisualWikitext

Latest revision as of 17:11, 14 October 2024

System Specifications

FACP: Mircom FX-2000

FACP Location: Main Floor Boiler Room

System Type: Single-Stage Addressable

System Line Voltage: 120VAC

NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: NO!

Date of last known Upgrade: 2010s

Year Opened: 2005

Vogue is a 4 story condominium building located at 930 6 Ave SW, Calgary, AB. The building was constructed in 2005 and the system may be original aside from the panel and some deficiency replacements.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator located at the front entrance.

Notification Appliances[edit | edit source]

Most notification appliances are System Sensor "SpectrAlert" P1224MCKA weatherproof horn/strobes (red, wall-mount, set to electromechanical, 75cd).

There are some System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical) as deficiency replacements, due to the building being a walkup and the horn/strobes being exposed to the elements.

There is one Mircom FHS-400-RR horn/strobe (red, wall-mount, set to 15cd) in the boiler room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are in outdoor spaces. There are two Mircom MS-401 single-action conventional pull stations mounted at each stairwell/exit, wired to a Mircom MIX-M500DMAP dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor.

Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements.

Automatic Detection Devices[edit | edit source]

There is a Mircom MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all signal circuits.

@@ Line 6: / Line 6: @@
 |-
 |FACP: Mircom FX-2000
 FACP Location: Main Floor Boiler Room
-System Type: Addressable
+System Type: Single-Stage Addressable
 System Line Voltage: 120VAC
@@ Line 23: / Line 21: @@
 Year Opened: 2005
-|}'''Vogue''' is a 4 story condominium building is SW Calgary, AB, Canada. The building was constructed in 2005 and the system may be original aside from some deficiency replacements.
+|}'''Vogue''' is a 4 story condominium building located at 930 6 Ave SW, Calgary, AB. The building was constructed in 2005 and the system may be original aside from the panel and some deficiency replacements.
 ==System Specifications==
 ===FACP===
-The Fire Alarm Control Panel is a Mircom FX-2000 in the main boiler room. It was probably installed when the building was built.
+The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.
 =====Annunciators=====
-There is one RAX-LCD located at the front entrance.
+There is a Mircom RAX-LCD annunciator located at the front entrance.
 ====Notification Appliances====
-Notification Appliances consist of System Sensor P1224MCKA (red, weatherprooof) horn/strobes. With some devices being replaced by a previous company with System Sensor P2RLA (red, indoor) horn/strobes some of which have failed due to this being a walk-up building and being exposed to the elements. There is also one Mircom FHS-400RR (red, wall-mount) indoor horn/strobe installed in the Boiler Room. None of them are synchronized.
+Most notification appliances are System Sensor "SpectrAlert" P1224MCKA weatherproof horn/strobes (red, wall-mount, set to electromechanical, 75cd).
+There are some System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical) as deficiency replacements, due to the building being a walkup and the horn/strobes being exposed to the elements.
+There is one Mircom FHS-400-RR horn/strobe (red, wall-mount, set to 15cd) in the boiler room.
 ===Initiating Devices===
 ====Pull Stations====
-Pull stations in most of the building are in outdoor spaces and consist of two Mircom MS-401 single-action conventional pull stations mounted at each of the two stairwells/exits with a Mircom MIX-M500DMA dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor. Other pull stations consist of Mircom MS-401AP addressable single action pull stations.
+Most pull stations are in outdoor spaces. There are two Mircom MS-401 single-action conventional pull stations mounted at each stairwell/exit, wired to a Mircom MIX-M500DMAP dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor.
+Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements.
 ====Automatic Detection Devices====
-There is a MIX-2251AP at the top of each stairwell.
+There is a Mircom MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases.
+==== EOLs ====
+There are Mircom MP-300 end-of-line resistor plates on all signal circuits.
 [[Category:Facilities]]
+[[Category:Calgary]]
+[[Category:Residential]]