Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

North Mount Pleasant Arts Centre: Difference between revisions

From FireAlarmPedia
No edit summary
(Mirror Com)
 
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2007 <br />Year Opened: 1913, 1985, 1995
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Continuous <br>Strobes Synchronized: No <br />Date of last known Upgrade: 2007 <br />Year Opened: 1913, 1985, 1995
|}
|}
'''North Mount Pleasant Arts Centre''' is an arts centre located at 523 27 Ave NW, Calgary, AB. It was originally built in 1913 as a school called West Mount Pleasant Bungalow, and the building’s use changed over the years. The building became the art studio in 1985, and was expanded and renovated in 1995. The fire alarm system was upgraded in 2007, while the notification appliances were installed in 1995.
'''North Mount Pleasant Arts Centre''' is an arts centre located at 523 27 Ave NW, Calgary, AB. It was originally built in 1913 as a school called West Mount Pleasant Bungalow, and the building’s use changed over the years. The building became the art studio in 1985, and was expanded and renovated in 1995. The fire alarm system was upgraded in 2007, while the notification appliances were installed in 1995.
== System Specifications (2007-present) ==
== System Specifications (2007-present) ==
==== FACP ====
==== FACP ====
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous. <br> The FX-2000 replaced an addressable EST ESA2000 in 2007.
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous. <br>The FX-2000 replaced an addressable EST ESA2000 in 2007.
==== Notification Appliances ====
==== Notification Appliances ====
All common area notification appliances are Wheelock MBS-G10-24 motor bell/strobes (10” gong, 1.5cd). <br> The main floor mechanical room has EST 882-2B remote horns (red, wall-mount). <br> The basement mechanical room has EST 892-2B horn/strobes (red, wall-mount, 1.5cd).
All common area notification appliances are Wheelock MBS-G10-24 motor bell/strobes (10” gong, 1.5cd). <br> The main floor mechanical room has EST 882-2B remote horns (red, wall-mount). <br> The basement mechanical room has EST 892-2B horn/strobes (red, wall-mount, 1.5cd).
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
All common area pull stations are Mircom MS-401AD addressable single-action pull stations. <br> The mechanical rooms have Edwards 270-SPO conventional pull stations, wired to Mircom MIX-M501MA addressable modules. These pull stations were left over from the ESA2000.
All common area pull stations are Mircom MS-401AD addressable single-action pull stations. <br>The mechanical rooms have Edwards 270-SPO conventional pull stations, wired to Mircom MIX-M501MA addressable modules. These pull stations were left over from the ESA2000.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are Mircom MIX-5251RBA addressable thermal rate-of-rise heat detectors throughout the building. <br> In the crawlspace and at the top of each stairwell, there are Mircom MIX-2251BA addressable photoelectric smoke detectors. <br> All detectors are mounted on System Sensor B710LPA bases.
There are Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate-of-rise heat detectors throughout the building. <br>In the crawlspace and at the top of each stairwell, there are Mircom MIX-2251BA addressable photoelectric smoke detectors. <br>All detectors are mounted on System Sensor B710LPA bases.
 
==== EOLs ====
There are Edwards EOL-P1 end of line resistor plates on all signal circuits.
[[Category:Calgary]]
[[Category:Calgary]]
[[Category:Community Centres]]
[[Category:Community Centres]]

Latest revision as of 17:42, 14 October 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: 2007
Year Opened: 1913, 1985, 1995

North Mount Pleasant Arts Centre is an arts centre located at 523 27 Ave NW, Calgary, AB. It was originally built in 1913 as a school called West Mount Pleasant Bungalow, and the building’s use changed over the years. The building became the art studio in 1985, and was expanded and renovated in 1995. The fire alarm system was upgraded in 2007, while the notification appliances were installed in 1995.

System Specifications (2007-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous.
The FX-2000 replaced an addressable EST ESA2000 in 2007.

Notification Appliances[edit | edit source]

All common area notification appliances are Wheelock MBS-G10-24 motor bell/strobes (10” gong, 1.5cd).
The main floor mechanical room has EST 882-2B remote horns (red, wall-mount).
The basement mechanical room has EST 892-2B horn/strobes (red, wall-mount, 1.5cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All common area pull stations are Mircom MS-401AD addressable single-action pull stations.
The mechanical rooms have Edwards 270-SPO conventional pull stations, wired to Mircom MIX-M501MA addressable modules. These pull stations were left over from the ESA2000.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-5251RBA addressable 135°F fixed-temperature/rate-of-rise heat detectors throughout the building.
In the crawlspace and at the top of each stairwell, there are Mircom MIX-2251BA addressable photoelectric smoke detectors.
All detectors are mounted on System Sensor B710LPA bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.