More actions
No edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 7: | Line 7: | ||
|- | |- | ||
|FACP: Edwards 2280<br />FACP Location: Unknown | |FACP: Edwards 2280<br />FACP Location: Unknown | ||
System Type:Conventional<br /> | System Type:Single-Stage Conventional<br /> | ||
System Line Voltage: 120VAC<br /> | System Line Voltage: 120VAC<br /> | ||
NAC Voltage:24VDC | NAC Voltage:24VDC | ||
Line 26: | Line 26: | ||
==== Automatic Detection Devices ==== | ==== Automatic Detection Devices ==== | ||
None noticed. | None noticed. | ||
==== EOLs ==== | |||
There are Edwards EOL-P1 end-of-line resistor plates on all circuits. | |||
[[Category:Facilities]] | [[Category:Facilities]] | ||
[[Category:Hotels]] | [[Category:Hotels]] | ||
[[Category:Alberta]] | [[Category:Alberta]] |
Latest revision as of 20:09, 14 October 2024
System Specifications |
---|
FACP: Edwards 2280 FACP Location: Unknown System Type:Single-Stage Conventional System Coding: Continuous |
Waldorf Hotel is a 3 story hotel located at 70 Railway Ave, Drumheller, AB, Canada. The system is all partially assumed as only the panel is visible from the windows and the other devices are visible but hard to see. The building was built in 1937, and the fire alarm system was installed in the 1980s.
System Specifications (1980s-present)[edit | edit source]
FACP[edit | edit source]
The hotel is protected by an Edwards 2280 conventional fire alarm system. Not much is known about it, but it was likely installed in the 1980s as it has the later model silkscreen on the door.
Notification Appliances[edit | edit source]
The notification appliances are a mix of Edwards "Durabel" 6100D vibrating bells (6" gong) and Edwards 439D-6AWC vibrating bells (6" gong) likely installed with the panel.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations are Edwards 274-111 conventional pull stations.
Automatic Detection Devices[edit | edit source]
None noticed.
EOLs[edit | edit source]
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.