Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Canadian Tire (Richmond Square): Difference between revisions

From FireAlarmPedia
No edit summary
 
Line 17: Line 17:
All pull stations are Mircom MS-401AD addressable single-action pull stations.
All pull stations are Mircom MS-401AD addressable single-action pull stations.
====Automatic Detection Devices====
====Automatic Detection Devices====
There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B710LPA bases.
There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B210LPA bases.


There are Mircom MIX-DH200PLA addressable photoelectric duct smoke detectors on all air handling units.
There are Mircom MIX-DH200PLA addressable photoelectric duct smoke detectors on all air handling units.

Latest revision as of 19:37, 23 October 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Automotive Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage:24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2000s-10s
Year Built: 1975

Canadian Tire is a chain of department stores aimed primarily at Automotive, Tools and Outdoors. This particular store is located at 5200 Richmond Road Southwest, in the Richmond Square shopping centre, in Calgary, Alberta, Canada. The building opened in 1975, and the fire alarm system is from the 2000s.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the automotive entrance vestibule. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Mircom "Select-A-Horn/Strobe" FHS-240R horn/strobes (red, wall-mount, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors at the top of each stairwell, mounted on System Sensor B210LPA bases.

There are Mircom MIX-DH200PLA addressable photoelectric duct smoke detectors on all air handling units.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.