More actions
(Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FleX-Net w/QX-5000 <br />FACP Location: CACF Room <br />System Type: Two-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 70VRMS (audible) <br> 24VFWR (visual) <br />System Coding: Unknown <br>Strobes Synchronized: Yes, System Sensor <br />Date of last known Upgrade: N/A <br />Year Opened: 2022 |} The Oliver Apartments is a large apartment located at 52...") |
No edit summary |
||
| Line 23: | Line 23: | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are Mircom MIX- | There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B210LPA bases. | ||
==== Modules ==== | ==== Modules ==== | ||
Latest revision as of 22:02, 11 January 2025
| System Specifications |
|---|
| FACP: Mircom FleX-Net w/QX-5000 FACP Location: CACF Room System Type: Two-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 70VRMS (audible) 24VFWR (visual) System Coding: Unknown Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: N/A Year Opened: 2022 |
The Oliver Apartments is a large apartment located at 524 10 Ave SW, Calgary, Alberta. The building opened in 2022, and has the original fire alarm system.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FleX-Net addressable fire alarm system. The panel is located in the main floor CACF room. The system runs Mircom’s Advanced addressable protocol, and is equipped with the QX-5000 voice evacuation sytem. The system is configured for two-stage operation, however the messages and/or tones are unknown at this time.
Notification Appliances[edit | edit source]
Most notification appliances are System Sensor “L-Series” SPSWLA speaker/strobes (white, wall-mount).
Some areas have System Sensor “L-Series” SPSCWLA speaker/strobes (white, ceiling-mount).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Mircom MS-402AP addressable two-stage single-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B210LPA bases.
Modules[edit | edit source]
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There are System Sensor M500XA isolator modules on the SLCs.
EOLs[edit | edit source]
There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.