More actions
(Yes, 4 inch bells exist. And yes, this system is still in service) |
(→EOLs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 24: | Line 24: | ||
There are System Sensor C2W-BA addressable photoelectric smoke detectors throughout the building. <br>There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most non-living areas. <br>There is a System Sensor 5603A conventional fixed-temperature heat detector in the kitchen. <br>There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms. | There are System Sensor C2W-BA addressable photoelectric smoke detectors throughout the building. <br>There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most non-living areas. <br>There is a System Sensor 5603A conventional fixed-temperature heat detector in the kitchen. <br>There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms. | ||
==== EOLs ==== | |||
There are Simplex 2081-9018C end-of-line resistor plates on all circuits. | |||
[[Category:Calgary]] | [[Category:Calgary]] | ||
[[Category:Healthcare]] | [[Category:Healthcare]] | ||
Latest revision as of 22:01, 12 October 2024
| System Specifications |
|---|
| FACP: Simplex 4001 FACP Location: Main Office System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Strobes Synchronized: N/A Date of last known Upgrade: 2010s Year Opened: 1987 |
Scenic Bow Place is a group home complex operated by Alberta Health Services. This page will cover Group Home 21, located at #116, 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system is partially original; most initiating devices were replaced in the 2010s.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Simplex 4001 conventional fire alarm system. The panel is located in the main office. The system coding is continuous.
Notification Appliances[edit | edit source]
The notification appliance is a Simplex 2901-9328 vibrating bell (4” gong) located in the main corridor.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
There are no pull stations on this system.
Automatic Detection Devices[edit | edit source]
There are System Sensor C2W-BA addressable photoelectric smoke detectors throughout the building.
There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in most non-living areas.
There is a System Sensor 5603A conventional fixed-temperature heat detector in the kitchen.
There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.
EOLs[edit | edit source]
There are Simplex 2081-9018C end-of-line resistor plates on all circuits.