Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

572 Aero Drive NE, Calgary: Difference between revisions

From FireAlarmPedia
(Cleaned up page, fixed infobox, added modules and EOls.)
m (TwentyThree33 moved page 572 Aero Drive NE to 572 Aero Drive NE, Calgary without leaving a redirect: Page was made prior to Fire Alarmpedia expanding beyond Calgary. Move is being done to avoid confusion with other cities.)
 
(No difference)

Latest revision as of 09:52, 7 September 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2014

572 Aero Drive NE is the address of an industrial building in the Stoney 2 industrial area of Calgary, Alberta, Canada. This building houses Goodfood Market, Flying Squirrel Trampoline Park, Laser City, and Cimco Refrigeration. The building opened in 2014, and the fire alarm system is original.

System Specifications (2014-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown at this time. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

Most notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to 15cd/broadband). The washrooms in Flying Squirrel have Mircom “Select-A-Strobe” FS-340R remote strobes (red, wall-mount, set to 15cd). The notification appliances in the other units are unknown, but are likely the same as above.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.