Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Safeway (Southcentre): Difference between revisions

From FireAlarmPedia
(Pretty basic EST system, nothing special. Lame for a Safeway though.)
 
(Drove past the entrance yesterday and saw a Mircom FX-4000 in place of the QuickStart. Gotta go in there this weekend.)
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
''Safeway'' is a chain of grocery stores across Canada and the USA.  This particular store is located in the Willow Park neighborhood of Southeast Calgary.  It was built in 1974, but the system is not original.


==System Specifications==
{| style="float:right;border:2px solid black"
|-
!Former System Specifications
|-
|
|-
|FACP: EST Quickstart QS4<br>FACP Location: Main Entrance Vestibule<br>System Type: Single-Stage Conventional<br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR<br>System Coding: Temporal<br>Strobes Synchronized: Yes, Self-Sync<br />Date of last upgrade: 2000s<br />Year Built: 1985
|}
'''Safeway Canada''' is a chain of grocery stores owned by Empire.  This particular store is located at 11011 Bonaventure Drive SE, in Calgary, Alberta, Canada.  The building was built in 1985, and the fire alarm system was partially upgraded in the 2000s.  This system was fully replaced in 2025.  Stay tuned for the new system!
==Former System Specifications (2000s-2025)==
====FACP====
====FACP====
The store is protected by an EST Quickstart QS1 fire alarm panel.  It is located in the left entrance.  The panel is not original, and was installed sometime in the 2010s.
The building was protected by an EST QuickStart QS4 conventional fire alarm system. The panel was located in the main entrance vestibule.  The system coding was temporal.  This panel was equipped with a ZB16 zone card, and likely replaced an Edwards Custom 6500.
 
====Notification Appliances====
====Notification Appliances====
All notification appliances are EST "Genesis" G1R-HDVM horn/strobes mounted on G1F-FIRE trim plates.
All notification appliances were Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd) mounted on G1RT-FIRE trim plates (FIRE marking).
 
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
The pull stations are mainly a mix of 1990s Edwards 270-SPOs and 2000s EST SIGA-270s.  There is one original 270-SPO, located by the back exit.
All pull stations were Edwards 270-SPO conventional single-action pull stations; both original and deficiency replacement devices were present.
 
====Automatic Detection Devices====
====Automatic Detection Devices====
The areas with lower ceilings have EST SIGA-PS addressable photoelectric smoke detectors.
None noticed.
==== EOLs ====
There were Edwards EOL-P1 end-of-line resistor plates on all circuits.
[[Category:Facilities]]
[[Category:Calgary]]
[[Category:Retail Stores]]
[[Category:Edwards]]

Latest revision as of 05:28, 14 October 2025

Former System Specifications
FACP: EST Quickstart QS4
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Self-Sync
Date of last upgrade: 2000s
Year Built: 1985

Safeway Canada is a chain of grocery stores owned by Empire. This particular store is located at 11011 Bonaventure Drive SE, in Calgary, Alberta, Canada. The building was built in 1985, and the fire alarm system was partially upgraded in the 2000s. This system was fully replaced in 2025. Stay tuned for the new system!

Former System Specifications (2000s-2025)

FACP

The building was protected by an EST QuickStart QS4 conventional fire alarm system. The panel was located in the main entrance vestibule. The system coding was temporal. This panel was equipped with a ZB16 zone card, and likely replaced an Edwards Custom 6500.

Notification Appliances

All notification appliances were Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd) mounted on G1RT-FIRE trim plates (FIRE marking).

Initiating Devices

Pull Stations

All pull stations were Edwards 270-SPO conventional single-action pull stations; both original and deficiency replacement devices were present.

Automatic Detection Devices

None noticed.

EOLs

There were Edwards EOL-P1 end-of-line resistor plates on all circuits.