Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

RONA (Bowness): Difference between revisions

From FireAlarmPedia
m (Simplex NimrodES moved page Rona (Bowness) to RONA (Bowness) without leaving a redirect: RONA is all caps)
No edit summary
 
(9 intermediate revisions by 3 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FA-1000 <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage:24VFWR<br />Date of last known Upgrade: 2018<br />Year Opened: 1993
| FACP: Mircom FA-1000
FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage:24VFWR <br />System Coding: Continuous? <br /> Strobes Synchronized: No<br />Date of last known Upgrade: 2018<br />Year Opened: 1993
|}
|}
'''Rona''' is a chain of hardware stores. This particular location is located in Bowness, NW Calgary. It was built in 1993 as Totem Building Supplies, and then it became a Rona in the early 2010s. Most of the fire alarm system was unaffected, and most notification appliances, and all pull stations are original. The system is serviced and managed by Troy Life & Fire Safety.
'''Rona''' is a chain of hardware stores. This particular location is located at 6912 29 Ave NW, Calgary, AB. It was built in 1993 as Totem Building Supplies as a new store on the existing property, was expanded in 2004, and became a Rona in 2011. The fire alarm system is mostly original, with a panel replacement in 2018.
==System Specifications (1993-present)==
====FACP====
The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is continuous.


== System Specifications ==
The FA-1000 replaced the original Mirtone 7800 in 2018.
====Notification Appliances====
All indoor notification appliances are Wheelock MBS-G10-24 motor bell/strobes (10" gong, 1.5cd)


==== FACP ====
For exterior notification, there is a System Sensor "SpectrAlert" S241575K weatherproof remote strobe (red, wall-mount, 15/75cd) installed in 2004.
=== Initiating Devices===
====Pull Stations====
All pull stations are Mirtone 73201 conventional dual-action pull stations.
====Automatic Detection Devices====
None noticed. There is a sprinkler system.


The fire alarm control panel is a newer Mircom FA-1000. This panel was installed in April 2018, it most likely replaced a Mirtone 7800 from 1993. The panel is located in the main entrance.
==== EOLs ====
 
There are Mirtone 7906 end-of-line resistor plates on all circuits.
==== Notification Appliances ====
[[Category:Facilities]]
 
[[Category:Calgary]]
The notification appliances are Wheelock MBS-G10-24 motor bell/strobes, that are all original from 1993. There seems to be no replacement bell/strobes. There is an outdoor notification appliance by the entrance, and it is a System Sensor "SpectrAlert" S1224MCK (red, wall) weatherproof remote strobe, installed after 1997, but before 2006.  
[[Category:Retail Stores]]
 
=== Initiating Devices ===
 
==== Pull Stations ====
 
The pull stations are all Mirtone 73201 dual-action pull stations, which are original.
 
==== Automatic Detection Devices ====
 
None noticed.

Latest revision as of 13:15, 10 October 2024

System Specifications
FACP: Mircom FA-1000

FACP Location: Main Entrance Vestibule
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage:24VFWR
System Coding: Continuous?
Strobes Synchronized: No
Date of last known Upgrade: 2018
Year Opened: 1993

Rona is a chain of hardware stores. This particular location is located at 6912 29 Ave NW, Calgary, AB. It was built in 1993 as Totem Building Supplies as a new store on the existing property, was expanded in 2004, and became a Rona in 2011. The fire alarm system is mostly original, with a panel replacement in 2018.

System Specifications (1993-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is continuous.

The FA-1000 replaced the original Mirtone 7800 in 2018.

Notification Appliances[edit | edit source]

All indoor notification appliances are Wheelock MBS-G10-24 motor bell/strobes (10" gong, 1.5cd)

For exterior notification, there is a System Sensor "SpectrAlert" S241575K weatherproof remote strobe (red, wall-mount, 15/75cd) installed in 2004.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mirtone 73201 conventional dual-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed. There is a sprinkler system.

EOLs[edit | edit source]

There are Mirtone 7906 end-of-line resistor plates on all circuits.