Banff Woods Lodge: Difference between revisions

Latest revision as of 12:44, 8 September 2024

System Specifications

FACP: Edwards EST2 FACP Location: Main Building Lobby System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, EST Date of last known Upgrade: 2015 Year Opened: 2003

Banff Woods Lodge is a 2-story hotel located at 1200 Harvie Heights Rd, Harvie Heights, AB, near Canmore. It opened in 2003 as the Inn of the Rockies, and became Banff Woods Lodge in 2021. The hotel consists of five buildings set up like a townhouse. Each unit has two floors, and all buildings are monitored by the same fire alarm system. The system is original.

System Specifications (2003-present)[edit | edit source]

FACP[edit | edit source]

The buildings are protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main building's lobby near the desk. The system monitors every building as a network. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are from EST's "Genesis" line of products.

Main Building (Pool Area, Gym, Lobby)[edit | edit source]

All notification appliances but one are EST G1R-HV15 horn/strobes (red, wall-mount, no lettering, 15cd, first gen).

There is an EST G1R-HDVM horn/strobe (red, wall-mount, no lettering, set to 15cd) above the panel as a deficiency replacement for an EST 692-5A-HSR mini-horn/strobe (red, 15cd).

Units[edit | edit source]

All units have an EST G1-HV15 horn/strobe (white, wall-mount, no lettering, 15cd, first gen) in the living area.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations. These are only in the main building.

Automatic Detection Devices[edit | edit source]

The main building has EST SIGA-PS addressable photoelectric smoke detectors.

The units have EST SIGA-HRS addressable rate-of-rise/fixed heat detectors, at the top of each stairwell.

All detectors are mounted on SIGA-SB bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.

@@ Line 5: / Line 5: @@
 |
 |-
-| FACP: EST2 <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />Date of last known Upgrade: 2015 <br />Year Opened: 2003
+| FACP: Edwards EST2
+FACP Location: Main Building Lobby<br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br>System Coding: Temporal <br>Strobes Synchronized: Yes, EST<br />Date of last known Upgrade: 2015 <br />Year Opened: 2003
 |}
+'''Banff Woods Lodge''' is a 2-story hotel located at 1200 Harvie Heights Rd, Harvie Heights, AB, near Canmore. It opened in 2003 as the Inn of the Rockies, and became Banff Woods Lodge in 2021. The hotel consists of five buildings set up like a townhouse. Each unit has two floors, and all buildings are monitored by the same fire alarm system. The system is original.
+==System Specifications (2003-present)==
+====FACP====
+The buildings are protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main building's lobby near the desk. The system monitors every building as a network. The system runs EST's Signature addressable protocol, and the system coding is temporal.
+====Notification Appliances====
+All notification appliances are from EST's "Genesis" line of products.
+=====Main Building (Pool Area, Gym, Lobby)=====
+All notification appliances but one are EST G1R-HV15 horn/strobes (red, wall-mount, no lettering, 15cd, first gen).
-'''Inn of the Rockies''' is a 2-story hotel in Canmore, AB. It has no hallways, so has outdoor entrances like a house on a duplex. Each unit has two floors, over a course of 5 individual buildings, but are all monitored by the main panel in the front desk, where the pool and gym are.
+There is an EST G1R-HDVM horn/strobe (red, wall-mount, no lettering, set to 15cd) above the panel as a deficiency replacement for an EST 692-5A-HSR mini-horn/strobe (red, 15cd).
+===== Units=====
+All units have an EST G1-HV15 horn/strobe (white, wall-mount, no lettering, 15cd, first gen) in the living area.
+===Initiating Devices===
+====Pull Stations====
+All pull stations are EST SIGA-270 addressable single-action pull stations. These are only in the main building.
+====Automatic Detection Devices====
+The main building has EST SIGA-PS addressable photoelectric smoke detectors.
-== System Specifications ==
+The units have EST SIGA-HRS addressable rate-of-rise/fixed heat detectors, at the top of each stairwell.
-==== FACP ====
+All detectors are mounted on SIGA-SB bases.
-The fire alarm control panel is an EST2, located in the front building in the lobby. It was installed in early 2003, original to the building. The EST2 monitors every individual building.
+==== EOLs ====
+There are Edwards EOL-P1 end of line resistor plates on all signal circuits.
-==== Notification Appliances ====
+[[Category:Alberta]]
+[[Category:Hotels]]
-The notification appliances seen throughout the units, in the living space but hardly noticeable are EST "Genesis" G1-HV15 (first gen, white, wall, no FIRE) horn/strobes which are original. The pool and gym areas in the front desk building have EST "Genesis" G1R-HV15 (red, wall, no FIRE, first gen) horn/strobes. Above the FACP in the lobby, there was formerly an EST "Integrity" 692-5A-HSR mini-horn/strobe, but has been replaced with an EST "Genesis" G1R-HDVM (red, wall, no FIRE, current gen).
-=== Initiating Devices ===
-==== Pull Stations ====
-There seems to only be pull stations in the main building, they are the original EST SIGA-270 pull stations.
-==== Automatic Detection Devices ====
-Each unit has an EST SIGA-HRS heat detector in the stairs. The smoke detectors in the front building are EST SIGA-PS.
-[[Category:Facilities]]