Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Water Tower Grill & Bar: Difference between revisions

From FireAlarmPedia
(Converted page to modern format, and cleaned up a bit. Also added the assumed addressability setup.)
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Kidde VS4 <br />System Type:Addressable (Hybrid Manner)<br /> System Line Voltage: 120VAC<br />NAC Voltage:24VFWR <br />Date of last known Upgrade: 2018-2020 <br />Year Opened: 1959 (as a water tower) <br> 2003 (as a restaurant)
| FACP: Kidde VS4
FACP Location: Main Entrance<br />System Type: Single-Stage Conventional<br /> System Line Voltage: 120VAC<br />NAC Voltage:24VFWR  
 
System Coding: Temporal
 
Strobes Synchronized: Yes, Genesis<br />Date of last known Upgrade: 2021<br />Year Opened: 1959 (as a water tower) <br> 2003 (as a restaurant)
|}
|}
The '''Water Tower Grill & Bar''' is a restaurant in Lethbridge, AB. It is located near the neighborhood of Glendale in between North and South Lethbridge. The restaurant started off as a water tower in 1959, converted into a restaurant with a great view in 2003. The fire alarm panel was replaced this year.
The '''Water Tower Grill & Bar''' is a restaurant located at 103 Mayor Magrath Drive S, Lethbridge, Alberta. The restaurant started off as a water tower in 1959, converted into a restaurant in 2003. The fire alarm system was upgraded in 2003, with a panel replacement in 2021.
== System Specifications ==
== System Specifications (2021-present) ==
==== FACP ====
==== FACP ====
The restaurant is protected by a Kidde VS4 addressable fire alarm system. The panel is located at the main entrance. The system runs EST's Signature-series addressable protocol, and does code 3 in alarm.
The restaurant is protected by a Kidde VS4 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.
 
The VS4 replaced an EST FireShield FS1004G in 2021.
==== Notification Appliances ====
==== Notification Appliances ====
All notification appliances are EST "Genesis" G1R-HDVM horn/strobes (red, wall-mount, set to 15cd).  
All notification appliances are EST "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
All pull stations are Edwards 270-SPO conventional single-action pull stations.  These are likely connected to Kidde GSA-CT1 addressable modules.
All pull stations are Edwards 270-SPO conventional single-action pull stations.  
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
None noticed.
None noticed.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all circuits.
[[Category:Facilities]]
[[Category:Restaurants]]
[[Category:Lethbridge]]

Latest revision as of 20:23, 14 October 2024

System Specifications
FACP: Kidde VS4

FACP Location: Main Entrance
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage:24VFWR

System Coding: Temporal

Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2021
Year Opened: 1959 (as a water tower)
2003 (as a restaurant)

The Water Tower Grill & Bar is a restaurant located at 103 Mayor Magrath Drive S, Lethbridge, Alberta. The restaurant started off as a water tower in 1959, converted into a restaurant in 2003. The fire alarm system was upgraded in 2003, with a panel replacement in 2021.

System Specifications (2021-present)[edit | edit source]

FACP[edit | edit source]

The restaurant is protected by a Kidde VS4 conventional fire alarm system. The panel is located at the main entrance. The system coding is temporal.

The VS4 replaced an EST FireShield FS1004G in 2021.

Notification Appliances[edit | edit source]

All notification appliances are EST "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.