Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Walmart Supercentre (Sage Hill): Difference between revisions

From FireAlarmPedia
No edit summary
No edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Simplex 4007ES  
| FACP: Simplex 4007ES
FACP Location: Unknown<br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC  
FACP Location: Main Entrance Vesstibule<br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC  


System Coding: Temporal
System Coding: Temporal
Line 15: Line 15:
== System Specifications ==
== System Specifications ==
==== FACP ====
==== FACP ====
The store is protected by a Simplex 4007ES addressable fire alarm system. The panel is in an unknown location, and was installed in 2021, replacing the original EST panel, which had no issues. The permit issued was "Fire Alarm System Voluntary Upgrade." on April 5, 2021. The system runs Simplex's IDNet addressable protocol, and the horn/strobes are self-coded to temporal.
The store is protected by a Simplex 4007ES addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Simplex's IDNet addressable protocol, and the horn/strobes are self-coded to temporal.
==== Notification Appliances ====
==== Notification Appliances ====
The notification appliances consist of EST "Genesis" G1R-HDVM (red, wall, no FIRE) horn/strobes and EST "Genesis" G1R-VM (red, wall, no FIRE) remote strobes. On pillars, there are two horn/strobes, each on opposite sides, and remote strobes on the other sides. They are original.
The notification appliances consist of EST "Genesis" G1R-HDVM (red, wall, no marking, set to 15cd) horn/strobes and EST "Genesis" G1R-VM (red, wall, no marking, set to 15cd) remote strobes. On pillars, there are two horn/strobes, each on opposite sides, and remote strobes on the other sides.  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
The pull stations are Simplex 4099-9004 "T-Bar" addressable single-action pull stations with status LED. They were installed in 2021, replacing the original pull stations because they were not compatible.
The pull stations are Simplex 4099-9004 addressable single-action pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
None noticed.
None noticed.
==== Modules ====
There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.
==== EOLs ====
There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.
== Former System Specifications ==
== Former System Specifications ==
{| style="float:right;border:2px solid black"
{| style="float:right;border:2px solid black"
Line 30: Line 37:
|  
|  
|-
|-
| FACP: Presumably EST iO500 or QuickStart QS1
| FACP: EST iO500
FACP Location: Unknown<br />System Type: Addresable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR  
FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR  


System Coding: Temporal
System Coding: Temporal
Line 38: Line 45:
|}
|}
==== FACP ====
==== FACP ====
The fire alarm panel was some addressable EST panel, likely an EST iO500 or QuickStart QS1. The fire alarm panel was never found, but was assumed. The system was replaced with a Simplex 4007ES in 2021, for unknown reasons. The system ran EST's Signature-series addressable protocol, and the system coding was temporal.  
The building was protected by an EST iO500 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran EST's Signature addressable protocol, and the system coding was temporal.  
==== Notification Appliances ====
==== Notification Appliances ====
The notification appliances were the EST "Genesis" G1R-HDVM (red, wall, no FIRE) horn/strobes and EST "Genesis" G1R-VM (red, wall, no FIRE) remote strobes, which stayed there despite the upgrade.
The notification appliances were the EST "Genesis" G1R-HDVM (red, wall, no FIRE) horn/strobes and EST "Genesis" G1R-VM (red, wall, no FIRE) remote strobes, which stayed there despite the upgrade.
Line 46: Line 53:
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
None noticed.
None noticed.
==== Modules ====
There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches
==== EOLs ====
There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.
[[Category:Facilities]]
[[Category:Retail Stores]]
[[Category:Calgary]]

Latest revision as of 21:20, 14 October 2024

System Specifications
FACP: Simplex 4007ES

FACP Location: Main Entrance Vesstibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC

System Coding: Temporal

Strobes Synchronized: Yes, SignalMaster
Date of last known Upgrade: 2021
Year Opened: 2014

Walmart is a retail store chain. This particular location is in Sage Hill, NW Calgary. It was built in 2014, and recently underwent a system upgrade. Only the notification appliances are original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The store is protected by a Simplex 4007ES addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Simplex's IDNet addressable protocol, and the horn/strobes are self-coded to temporal.

Notification Appliances[edit | edit source]

The notification appliances consist of EST "Genesis" G1R-HDVM (red, wall, no marking, set to 15cd) horn/strobes and EST "Genesis" G1R-VM (red, wall, no marking, set to 15cd) remote strobes. On pillars, there are two horn/strobes, each on opposite sides, and remote strobes on the other sides.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

The pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Simplex 4090-9001 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications[edit | edit source]

System Specifications
FACP: EST iO500

FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Decommissioned: 2021

FACP[edit | edit source]

The building was protected by an EST iO500 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran EST's Signature addressable protocol, and the system coding was temporal.

Notification Appliances[edit | edit source]

The notification appliances were the EST "Genesis" G1R-HDVM (red, wall, no FIRE) horn/strobes and EST "Genesis" G1R-VM (red, wall, no FIRE) remote strobes, which stayed there despite the upgrade.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All of the pull stations were EST SIGA-270 addressable pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches

EOLs[edit | edit source]

There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.