Vogue (Condo Building): Difference between revisions

VisualWikitext

Latest revision as of 17:11, 14 October 2024

System Specifications

FACP: Mircom FX-2000

FACP Location: Main Floor Boiler Room

System Type: Single-Stage Addressable

System Line Voltage: 120VAC

NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: NO!

Date of last known Upgrade: 2010s

Year Opened: 2005

Vogue is a 4 story condominium building located at 930 6 Ave SW, Calgary, AB. The building was constructed in 2005 and the system may be original aside from the panel and some deficiency replacements.

System Specifications

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator located at the front entrance.

Notification Appliances

Most notification appliances are System Sensor "SpectrAlert" P1224MCKA weatherproof horn/strobes (red, wall-mount, set to electromechanical, 75cd).

There are some System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical) as deficiency replacements, due to the building being a walkup and the horn/strobes being exposed to the elements.

There is one Mircom FHS-400-RR horn/strobe (red, wall-mount, set to 15cd) in the boiler room.

Initiating Devices

Pull Stations

Most pull stations are in outdoor spaces. There are two Mircom MS-401 single-action conventional pull stations mounted at each stairwell/exit, wired to a Mircom MIX-M500DMAP dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor.

Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements.

Automatic Detection Devices

There is a Mircom MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases.

EOLs

There are Mircom MP-300 end-of-line resistor plates on all signal circuits.

@@ Line 6: / Line 6: @@
 |-
 |FACP: Mircom FX-2000
 FACP Location: Main Floor Boiler Room
-System Type: Addressable
+System Type: Single-Stage Addressable
 System Line Voltage: 120VAC
@@ Line 23: / Line 21: @@
 Year Opened: 2005
-|}'''Vogue''' is a 4 story condominium building is SW Calgary, AB, Canada. The building was constructed in 2005 and the system may be original aside from some deficiency replacements.
+|}'''Vogue''' is a 4 story condominium building located at 930 6 Ave SW, Calgary, AB. The building was constructed in 2005 and the system may be original aside from the panel and some deficiency replacements.
 ==System Specifications==
 ===FACP===
-The Fire Alarm Control Panel is a Mircom FX-2000 in the main boiler room. It was probably installed when the building was built.
+The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.
 =====Annunciators=====
-There is one RAX-LCD located at the front entrance.
+There is a Mircom RAX-LCD annunciator located at the front entrance.
 ====Notification Appliances====
-Notification Appliances consist of System Sensor P1224MCKA (red, weatherprooof) horn/strobes. With some devices being replaced by a previous company with System Sensor P2RLA (red, indoor) horn/strobes some of which have failed due to this being a walk-up building and being exposed to the elements. There is also one Mircom FHS-400RR (red, wall-mount) indoor horn/strobe installed in the Boiler Room. None of them are synchronized.
+Most notification appliances are System Sensor "SpectrAlert" P1224MCKA weatherproof horn/strobes (red, wall-mount, set to electromechanical, 75cd).
+There are some System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical) as deficiency replacements, due to the building being a walkup and the horn/strobes being exposed to the elements.
+There is one Mircom FHS-400-RR horn/strobe (red, wall-mount, set to 15cd) in the boiler room.
 ===Initiating Devices===
 ====Pull Stations====
-Pull stations in most of the building are in outdoor spaces and consist of two Mircom MS-401 single-action conventional pull stations mounted at each of the two stairwells/exits with a Mircom MIX-M500DMA dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor. Other pull stations consist of Mircom MS-401AP addressable single action pull stations.
+Most pull stations are in outdoor spaces. There are two Mircom MS-401 single-action conventional pull stations mounted at each stairwell/exit, wired to a Mircom MIX-M500DMAP dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor.
+Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements.
 ====Automatic Detection Devices====
-There is a MIX-2251AP at the top of each stairwell.
+There is a Mircom MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases.
+==== EOLs ====
+There are Mircom MP-300 end-of-line resistor plates on all signal circuits.
 [[Category:Facilities]]
+[[Category:Calgary]]
+[[Category:Residential]]