Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Chaparral Pointe Condos: Difference between revisions

From FireAlarmPedia
No edit summary
(Added several details to the page.)
 
(3 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br> System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: Yes, Mircom <br> Date of last known Upgrade: 2010s <br />Year Opened: 2006  
| FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule<br>System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br>Date of last known Upgrade: 2010s <br />Year Opened: 2006
|}
|}
'''Chaparral Pointe Condos''' is a 3-story apartment building located at 428 Chaparral Ravine View Southeast, in Calgary, Alberta, Canada. The building opened in 2006, and the fire alarm system is original with the exception of one notification appliance. The system is serviced by JAS Electric.  
'''Chaparral Pointe Condos''' is a 3-story apartment building located at 428 Chaparral Ravine View SE, in Calgary, Alberta, Canada. The building was built in 2006, and the fire alarm system is mostly original.
=== System Specifications (2006-present) ===
=== FACP ===
The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.  


=== System Specifications (2006-present) ===
===== Annunciators =====
There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the southeast stairwell.  Both annunciators are mounted in a Mircom BB-1002 enclosure.


=== FACP ===
The building is protected by a Mircom FX-2000 addressable fire alarm system.  The panel is located in the main entrance vestibule.  The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.
==== Notification Appliances ====
==== Notification Appliances ====
All common area notification appliances are Mircom "Select-A-Horn/Strobe" FHS-240R horn/strobes (red, wall-mount, set to broadband/15cd). The suites have Mircom MH-S25WA silenceable mini-horns (white, wall-mount) in each bedroom.  One unit has a System Sensor "SpectrAlert Advance" MHWZA silenceable mini-horn (white, wall-mount) as a deficiency replacement.
All common area notification appliances are Mircom "Select-A-Horn/Strobe" FHS-240R horn/strobes (red, wall-mount, set to broadband/15cd).  
 
The suites have Mircom MH-S25WA silenceable mini-horns (white, wall-mount) in each bedroom.   
 
One unit has a System Sensor "SpectrAlert Advance" MHWZA silenceable mini-horn (white, wall-mount) as a deficiency replacement.  
=== Initiating Devices ===
=== Initiating Devices ===
==== Pull Stations ====
==== Pull Stations ====
All pull stations are Mircom MS-401AD addressable single-action pull stations.
All pull stations are Mircom MS-401AD addressable single-action pull stations.
==== Automatic Detection Devices ====
==== Automatic Detection Devices ====
There are Mircom MIX-2251B addressable photoelectric smoke detectors throughout the common areas, mounted on System Sensor B710LPA low-profile bases.
There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout all common areas, mounted on System Sensor B710LPA bases.
 
==== Modules ====
There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.
 
There are Mircom MIX-M500RA addressable relay modules serving various purposes.
 
There are System Sensor M500XA isolator modules on the SLC.
 
There are Mircom CSIS-202A signal isolator modules on all suite NACs.
 
==== EOLs ====
There are Mircom MP-300 end of line resistor plates on all sprinkler and Class B signal circuits.
 
==Known Activations==
==Known Activations==
April 2017 - smoke detector near unit 324 activated due to tenant burning toast. The system worked like it was supposed to, but many residents did not evacuate.
April 2017 - smoke detector near unit 324 activated due to tenant burning toast. The system worked like it was supposed to, but many residents did not evacuate.
[[Category:Facilitie]
[[Category:Calgary]]
[[Category:Residential]]

Latest revision as of 17:35, 23 September 2024

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2010s
Year Opened: 2006

Chaparral Pointe Condos is a 3-story apartment building located at 428 Chaparral Ravine View SE, in Calgary, Alberta, Canada. The building was built in 2006, and the fire alarm system is mostly original.

System Specifications (2006-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom's CLIP addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the southeast stairwell. Both annunciators are mounted in a Mircom BB-1002 enclosure.

Notification Appliances[edit | edit source]

All common area notification appliances are Mircom "Select-A-Horn/Strobe" FHS-240R horn/strobes (red, wall-mount, set to broadband/15cd).

The suites have Mircom MH-S25WA silenceable mini-horns (white, wall-mount) in each bedroom.

One unit has a System Sensor "SpectrAlert Advance" MHWZA silenceable mini-horn (white, wall-mount) as a deficiency replacement.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout all common areas, mounted on System Sensor B710LPA bases.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are Mircom MIX-M500RA addressable relay modules serving various purposes.

There are System Sensor M500XA isolator modules on the SLC.

There are Mircom CSIS-202A signal isolator modules on all suite NACs.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and Class B signal circuits.

Known Activations[edit | edit source]

April 2017 - smoke detector near unit 324 activated due to tenant burning toast. The system worked like it was supposed to, but many residents did not evacuate.