More actions
Twentytwo22 (talk | contribs) No edit summary |
No edit summary |
||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
|FACP: Mircom FX-2000 | |FACP: Mircom FX-2000 <br>FACP Location: Main Electrical Room <br>System Type: Single-Stage Hybrid-Addressable <br>System Line Voltage: 120VAC <br>NAC Voltage: 24VFWR <br>System Coding: Continuous <br>Date of last known Upgrade: 2021 <br>Year Opened: 1980 | ||
FACP Location: Main Electrical Room | |}'''EQ Bank Tower''' is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall, with an upgrade in the early 2000s. | ||
System Type: Hybrid | |||
System Line Voltage: 120VAC | |||
NAC Voltage: 24VFWR | |||
System Coding: | |||
Date of last known Upgrade: 2021 | |||
Year Opened: | |||
|}'''EQ Bank Tower''' is a multi-story tower | |||
==System Specifications== | ==System Specifications== | ||
===FACP=== | ===FACP=== | ||
The | The building is protected by a Mircom FX-2000 hybrid addressable fire alarm system. The panel is located in the main electrical room, and is in a BBX-1072A cabinet.The system is mostly wired as conventional, with the main and 4th floors being fully addressable. It was likely installed in the early 2000s. The addressable parts of this system run Mircom's CLIP addressable protocol, and the system coding is continuous. | ||
Based on the devices, the FX-2000 most definitely replaced the original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator. | |||
=====Annunciators===== | =====Annunciators===== | ||
There is | There is a Mircom RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
Most notification appliances are Mircom BL-10A motor bells (10" gong) and BL-10B motor bells (10" gong). | |||
There are a few Mircom BL-6A motor bells (6" gong) and BL-6B motor bells (6" gong) mixed in. | |||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
====== Conventional ====== | ====== Conventional ====== | ||
About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod. There are a few Mircom MS-401 | About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod. | ||
There are a few Mircom MS-401 single-action pull stations as deficiency replacements. | |||
====== Addressable ====== | ====== Addressable ====== | ||
There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and | There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and 4th floors. | ||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
====== Conventional ====== | ====== Conventional ====== | ||
There is an equal variety of Edwards | There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors. | ||
====== Addressable ====== | ====== Addressable ====== | ||
There are | There are Mircom MIX-2251BA addressable photelectric smoke detectors installed on the 4rd floor. | ||
[[] | |||
There is a Mircom MIX-5351RAPA addressable rate-of-rise heat detector recently installed at one of the tenant entrances, along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room. | |||
Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room. | |||
All detectors are mounted on System Sensor B210LPA bases. | |||
[[Category:Calgary]] | |||
[[Category:Commercial]] | |||
Latest revision as of 16:59, 25 September 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Electrical Room System Type: Single-Stage Hybrid-Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Date of last known Upgrade: 2021 Year Opened: 1980 |
EQ Bank Tower is a multi-story tower located at 906 12 Ave SW, Downtown Calgary. It was built 1979-1980 according to building officials and verified with historical aerial imagery. The system is 60% original overall, with an upgrade in the early 2000s.
System Specifications[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 hybrid addressable fire alarm system. The panel is located in the main electrical room, and is in a BBX-1072A cabinet.The system is mostly wired as conventional, with the main and 4th floors being fully addressable. It was likely installed in the early 2000s. The addressable parts of this system run Mircom's CLIP addressable protocol, and the system coding is continuous.
Based on the devices, the FX-2000 most definitely replaced the original Edwards 6500 as evident by the abandoned annunciator behind the current annunciator.
Annunciators[edit | edit source]
There is a Mircom RAX-LCD in the front lobby. Mounted to the front door of the old Edwards 456 annunciator cabinet.
Notification Appliances[edit | edit source]
Most notification appliances are Mircom BL-10A motor bells (10" gong) and BL-10B motor bells (10" gong).
There are a few Mircom BL-6A motor bells (6" gong) and BL-6B motor bells (6" gong) mixed in.
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Conventional[edit | edit source]
About 80% of the conventional pull stations are original Edwards 270-SPO (single action, break glass) with the original solid glass rod.
There are a few Mircom MS-401 single-action pull stations as deficiency replacements.
Addressable[edit | edit source]
There are Mircom MS-401AD (single-action) addressable pull stations installed throughout the 1st and 4th floors.
Automatic Detection Devices[edit | edit source]
Conventional[edit | edit source]
There is an equal variety of Edwards 281C fixed/rate-of-rise and FDD CR-135 fixed/rate of rise heat detectors installed. Along with several Mirtone (model?) bi-metal type self-restoring heat detectors.
Addressable[edit | edit source]
There are Mircom MIX-2251BA addressable photelectric smoke detectors installed on the 4rd floor.
There is a Mircom MIX-5351RAPA addressable rate-of-rise heat detector recently installed at one of the tenant entrances, along with a Mircom MIX-5251RAPA (rate of rise) heat detector in the loading dock, the main telephone room and one in the main electrical room.
Finally, there is a MIX-5251HAPA (200°F) addressable heat detector in the generator room.
All detectors are mounted on System Sensor B210LPA bases.