Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Melton Building: Difference between revisions

From FireAlarmPedia
(YAY NOTIFIER! We don't like Edmonton though.)
 
No edit summary
 
(One intermediate revision by the same user not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Notifier NFS2-640C <br /> FACP Location: Unknown <br />System Type: Addressable <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br> Strobes Synchronized: N/A <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
| FACP: Notifier NFS2-640C <br />FACP Location: Unknown <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: N/A <br />Date of last known Upgrade: 2010s <br />Year Opened: 1970
|}
|}
 
The '''Melton Building''' is an office building located at 10310 Jasper Avenue, in Edmonton, Alberta, Canada. The building opened in 1970, and the fire alarm system was upgraded in the 2010s.
The '''Melton Building''' is an office building located at 10310 Jasper Avenue, in Edmonton, Alberta, Canada. The building opened in 1970, and the fire alarm system was upgraded in the 2010s.
 
==System Specifications (2010s-present)==
==System Specifications (2010s-present)==
====FACP====
====FACP====
The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
 
=====Annunciators=====
=====Annunciators=====
There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator in the main entrance vestibule.
There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator in the main entrance vestibule.
====Notification Appliances====
====Notification Appliances====
All notification appliances are System Sensor “SpectrAlert Advance” HRA remote horns (red, wall-mount).
All notification appliances are System Sensor “SpectrAlert Advance” HRA remote horns (red, wall-mount).
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
All pull stations are Notifier NBG-12LX addressable dual-action pull stations.
All pull stations are Notifier NBG-12LX addressable dual-action pull stations.
====Automatic Detection Devices====
====Automatic Detection Devices====
There are likely Notifier FSP-851A addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LPA bases.
There are likely Notifier FSP-851A addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LPA bases.
==== EOLs ====
There are Notifier EOL-CR end of line resistor plates on all signal circuits.
[[Category:Edmonton]]
[[Category:Commercial]]

Latest revision as of 22:02, 12 October 2024

System Specifications
FACP: Notifier NFS2-640C
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: N/A
Date of last known Upgrade: 2010s
Year Opened: 1970

The Melton Building is an office building located at 10310 Jasper Avenue, in Edmonton, Alberta, Canada. The building opened in 1970, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator in the main entrance vestibule.

Notification Appliances[edit | edit source]

All notification appliances are System Sensor “SpectrAlert Advance” HRA remote horns (red, wall-mount).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are likely Notifier FSP-851A addressable photoelectric smoke detectors in some areas, mounted on System Sensor B210LPA bases.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all signal circuits.