Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Deerfoot 17: Difference between revisions

From FireAlarmPedia
(Updated the bells as two were replaced in February, and more unique models were discovered. Also added additional smoke detector locations.)
No edit summary
 
(3 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|  
|  
|-
|-
| FACP: Simplex 4100ES <br /> FACP Location: Main Lobby <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br /> System Coding: Temporal <br />Date of last known Upgrade: 2022 <br />Year Opened: 1981
| FACP: Simplex 4100ES <br />FACP Location: Main Lobby <br />System Type: Single-Stage Conventional <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br />Date of last known Upgrade: 2022 <br />Year Opened: 1981
|}
|}
'''Deerfoot 17''' is a midrise office building located at 2710 17 Avenue Southeast, in Calgary, Alberta, Canada. The building is also referred to as the “Merchant Law Building” due to the large light-up sign on the roof. The building opened in 1981, and the fire alarm system is mostly original.
'''Deerfoot 17''' is a midrise office building located at 2710 17 Avenue Southeast, in Calgary, Alberta, Canada. The building is also referred to as the “Merchant Law Building” due to the large light-up sign on the roof. The building opened in 1981, and the fire alarm system is mostly original.
==System Specifications==
==System Specifications==
====FACP====
====FACP====
The building is protected by a Simplex 4100ES conventional fire alarm system. The panel is located in the main lobby. The system coding is temporal. This panel was installed in 2013, replacing the original Edwards 6500 FACP.
The building is protected by a Simplex 4100ES conventional fire alarm system. The panel is located in the main lobby. The system coding is temporal.  
 
This panel was installed in 2013, replacing the original Edwards 6500 FACP.
====Notification Appliances====
====Notification Appliances====
Most notification appliances are Edwards “Durabel” 6100D vibrating bells (6” gong). Some units have Edwards 439D-6AWC vibrating bells (6” gong). There are Simplex 2901-9723 motor bells (6” gong) in some areas as deficiency replacements. One unit has a Pyrotronics BDC-6C vibrating bell (6" gong), and another has an Edwards 439D-10AWC vibrating bell (10" gong) mounted on an Edwards 403-5A-R strobe plate (15cd). Some areas have Notifier KMS-6-24A motor bells (6" gong) as deficiency replacements.
Most notification appliances are Edwards “Durabel” 6100D vibrating bells (6” gong).  
 
Some units have Edwards 439D-6AWC vibrating bells (6” gong).  
 
There are Simplex 2901-9723 motor bells (6” gong) in some areas as deficiency replacements.  
 
One unit has a Pyrotronics BDC-624C vibrating bell (6" gong), and another has an Edwards 439D-10AWC vibrating bell (10" gong) mounted on an Edwards 403-5A-R strobe plate (15cd).  
 
Some areas have Notifier KMS-6-24A motor bells (6" gong) as deficiency replacements.
===Initiating Devices===
===Initiating Devices===
====Pull Stations====
====Pull Stations====
Most pull stations are Edwards 275-C111 conventional single-action pull stations. Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements. There is an Edwards 270-SPO conventional single-action pull station in a fifth floor unit as a deficiency replacement.
Most pull stations are Edwards 275-C111 conventional single-action pull stations.  
 
Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.  
 
There is an Edwards 270-SPO conventional single-action pull station in a fifth floor unit as a deficiency replacement.
====Automatic Detection Devices====
====Automatic Detection Devices====
There are Fire Detection Devices CR-135 conventional 135­°F fixed/rate-of-rise heat detectors in all units, utility closets and electrical rooms. There are Simplex "TrueAlarm" 4098-9601 conventional photoelectric smoke detectors at the top of the elevator shafts and stairwells, in the second floor elevator lobby, and in some suites.
There are FDD CR-135 conventional 135­°F fixed/rate-of-rise heat detectors in all units, utility closets and electrical rooms.  
 
There are Simplex "TrueAlarm" 4098-9601 conventional photoelectric smoke detectors at the top of the elevator shafts and stairwells, in the second floor elevator lobby, and in some suites, mounted on 4098-9788 bases.
[[Category:Calgary]]
[[Category:Commercial]]

Latest revision as of 17:16, 25 September 2024

System Specifications
FACP: Simplex 4100ES
FACP Location: Main Lobby
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Date of last known Upgrade: 2022
Year Opened: 1981

Deerfoot 17 is a midrise office building located at 2710 17 Avenue Southeast, in Calgary, Alberta, Canada. The building is also referred to as the “Merchant Law Building” due to the large light-up sign on the roof. The building opened in 1981, and the fire alarm system is mostly original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Simplex 4100ES conventional fire alarm system. The panel is located in the main lobby. The system coding is temporal.

This panel was installed in 2013, replacing the original Edwards 6500 FACP.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards “Durabel” 6100D vibrating bells (6” gong).

Some units have Edwards 439D-6AWC vibrating bells (6” gong).

There are Simplex 2901-9723 motor bells (6” gong) in some areas as deficiency replacements.

One unit has a Pyrotronics BDC-624C vibrating bell (6" gong), and another has an Edwards 439D-10AWC vibrating bell (10" gong) mounted on an Edwards 403-5A-R strobe plate (15cd).

Some areas have Notifier KMS-6-24A motor bells (6" gong) as deficiency replacements.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

Most pull stations are Edwards 275-C111 conventional single-action pull stations.

Some areas have Mircom MS-401 conventional single-action pull stations as deficiency replacements.

There is an Edwards 270-SPO conventional single-action pull station in a fifth floor unit as a deficiency replacement.

Automatic Detection Devices[edit | edit source]

There are FDD CR-135 conventional 135­°F fixed/rate-of-rise heat detectors in all units, utility closets and electrical rooms.

There are Simplex "TrueAlarm" 4098-9601 conventional photoelectric smoke detectors at the top of the elevator shafts and stairwells, in the second floor elevator lobby, and in some suites, mounted on 4098-9788 bases.