More actions
(Panel has been replaced since the page was made.) |
No edit summary |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
| | | | ||
|- | |- | ||
| FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance <br />System Type: Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979 | | FACP: Mircom FX-2000 <br /> FACP Location: Main Entrance Vestibule<br />System Type: Single-Stage Conventional <br /> System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br /> System Coding: Temporal <br> Strobes Synchronized: No <br />Date of last known Upgrade: 2023 <br />Year Opened: 1979 | ||
|} | |} | ||
'''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023. | '''Centre Eleven''' is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023. | ||
==System Specifications== | ==System Specifications (1979-present)== | ||
====FACP==== | ====FACP==== | ||
The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. | The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal. | ||
The panel replaced a Mircom FA-1000 in 2023. | |||
=====Annunciators===== | =====Annunciators===== | ||
There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance. | There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance. | ||
| Line 16: | Line 18: | ||
There is an Edwards BPS10A booster power supply in a closet on the first floor. | There is an Edwards BPS10A booster power supply in a closet on the first floor. | ||
====Notification Appliances==== | ====Notification Appliances==== | ||
The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. | The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong). | ||
The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement. | |||
There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit. | |||
The parkade has Wheelock MB-G6-24 motor bells (6" gong). | |||
The first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd). | |||
===Initiating Devices=== | ===Initiating Devices=== | ||
====Pull Stations==== | ====Pull Stations==== | ||
All pull stations but one are Edwards 270-SPO conventional single-action pull stations. There is an Edwards 274-111 conventional single-action pull station in a first floor unit. | All pull stations but one are Edwards 270-SPO conventional single-action pull stations. | ||
There is an Edwards 274-111 conventional single-action pull station in a first floor unit. | |||
====Automatic Detection Devices==== | ====Automatic Detection Devices==== | ||
There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. Most areas have Fire Detection Devices | There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas. | ||
[[] | |||
Most areas have Fire Detection Devices CR-135 conventional 135°F fixed/rate-of-rise heat detectors. | |||
==== EOLs ==== | |||
There are Edwards EOL-P1 end of line resistor plates on all circuits. | |||
[[Category:Calgary]] | |||
[[Category:Commercial]] | |||
Latest revision as of 16:26, 23 September 2024
| System Specifications |
|---|
| FACP: Mircom FX-2000 FACP Location: Main Entrance Vestibule System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2023 Year Opened: 1979 |
Centre Eleven is an office building located at 1121 Centre Street Northwest, in Calgary, Alberta, Canada. The building opened in 1979, and the fire alarm system is partially original, with a panel replacement occurring in 2023.
System Specifications (1979-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system coding is temporal.
The panel replaced a Mircom FA-1000 in 2023.
Annunciators[edit | edit source]
There is a Mircom RAX-LCD annunciator in a Mircom BB-1001 enclosure at the dance studio entrance.
Booster Panels[edit | edit source]
There is an Edwards BPS10A booster power supply in a closet on the first floor.
Notification Appliances[edit | edit source]
The notification appliances are primarily a mix of Mircom BL-6A/BL-6B motor bells (6” gong) and Mircom BL-10A/BL-10B motor bells (10” gong).
The main floor back exit has an Edwards 439D-6AWC vibrating bell (6” gong) installed in 2021 as a deficiency replacement.
There is an Edwards 439D-6AWC vibrating bell (6” gong) mounted on an Edwards 403-5A-R strobe plate (15cd) in a first floor unit.
The parkade has Wheelock MB-G6-24 motor bells (6" gong).
The first floor of the dance studio has Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations but one are Edwards 270-SPO conventional single-action pull stations.
There is an Edwards 274-111 conventional single-action pull station in a first floor unit.
Automatic Detection Devices[edit | edit source]
There are System Sensor "i3" C2W-BA conventional 2-wire photoelectric smoke detectors in some areas.
Most areas have Fire Detection Devices CR-135 conventional 135°F fixed/rate-of-rise heat detectors.
EOLs[edit | edit source]
There are Edwards EOL-P1 end of line resistor plates on all circuits.